Vidgrids » 3d printer filament 1.75

3d printer filament 1.75

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Bright Orange

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Bright Orange

54.99 USD

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Bright Orange Compatible Devices Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Bright Orange Get outstanding 3D printing results when you use 1.75mm ABS 3D Printer Filament from 123inkcartridges! ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230° C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS. Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 3MM 1kg/spool, Black

Premium 3D Printer Filament ABS 3MM 1kg/spool, Black

54.99 USD

Premium 3D Printer Filament ABS 3MM 1kg/spool, Black Compatible Devices Premium 3D Printer Filament ABS 3MM 1kg/spool, Black Get outstanding 3D printing results when you use 3.0mm ABS 3D Printer Filament from 123inkcartridges! ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 200° C (392°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS. Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 3MM 1kg/spool, White

Premium 3D Printer Filament ABS 3MM 1kg/spool, White

54.99 USD

Premium 3D Printer Filament ABS 3MM 1kg/spool, White Compatible Devices Premium 3D Printer Filament ABS 3MM 1kg/spool, White Get outstanding 3D printing results when you use 3.0mm ABS 3D Printer Filament from 123inkcartridges! ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 200° C (392°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS. Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 3MM 1kg/spool, Blue

Premium 3D Printer Filament ABS 3MM 1kg/spool, Blue

54.99 USD

Premium 3D Printer Filament ABS 3MM 1kg/spool, Blue Compatible Devices Premium 3D Printer Filament ABS 3MM 1kg/spool, Blue Get outstanding 3D printing results when you use 3.0mm ABS 3D Printer Filament from 123inkcartridges! ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 200° C (392°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS. Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 3MM 1kg/spool, Red

Premium 3D Printer Filament ABS 3MM 1kg/spool, Red

54.99 USD

Premium 3D Printer Filament ABS 3MM 1kg/spool, Red Compatible Devices Premium 3D Printer Filament ABS 3MM 1kg/spool, Red Get outstanding 3D printing results when you use 3.0mm ABS 3D Printer Filament from 123inkcartridges! ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 200° C (392°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS. Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Fluorescent Yellow

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Fluorescent Yellow

54.99 USD

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Fluorescent Yellow Compatible Devices Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Fluorescent Yellow Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from 123inkcartridges! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Crystal Clear

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Crystal Clear

54.99 USD

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Crystal Clear Compatible Devices Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Crystal Clear Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from 123inkcartridges! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Bright Green

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Bright Green

54.99 USD

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Bright Green Compatible Devices Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Bright Green Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from 123inkcartridges! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Black

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Black

54.99 USD

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Black Compatible Devices Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Black Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from 123inkcartridges.ca! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Blue

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Blue

35.99 USD

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Blue Compatible Devices Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Blue Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from 123inkcartridges.ca! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Red

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Red

54.99 USD

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Red Compatible Devices Premium 3D Printer Filament PLA 1.75MM 1kg/spool, Red Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from 123inkcartridges! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 3MM 1kg/spool, White

Premium 3D Printer Filament PLA 3MM 1kg/spool, White

54.99 USD

Premium 3D Printer Filament PLA 3MM 1kg/spool, White Compatible Devices Premium 3D Printer Filament PLA 3MM 1kg/spool, White Get outstanding 3D printing results when you use 3.0mm PLA 3D Printer Filament from 123inkcartridges! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 185° C (365°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot.   Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White

47.99 USD

Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White Compatible Devices Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 3MM 1kg/spool, Black

Premium 3D Printer Filament PLA 3MM 1kg/spool, Black

54.99 USD

Premium 3D Printer Filament PLA 3MM 1kg/spool, Black Compatible Devices Premium 3D Printer Filament PLA 3MM 1kg/spool, Black Get outstanding 3D printing results when you use 3.0mm PLA 3D Printer Filament from 123inkcartridges! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 185° C (365°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament PLA 3MM 1kg/spool, Red

Premium 3D Printer Filament PLA 3MM 1kg/spool, Red

54.99 USD

Premium 3D Printer Filament PLA 3MM 1kg/spool, Red Compatible Devices Premium 3D Printer Filament PLA 3MM 1kg/spool, Red Get outstanding 3D printing results when you use 3.0mm PLA 3D Printer Filament from 123inkcartridges! PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn. This 1 Kg spool features a thickness of 3.0mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 185° C (365°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot.   Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

MYWERKZ 1.75 PLA 3D FILAMENT WOOD

MYWERKZ 1.75 PLA 3D FILAMENT WOOD

39.66 USD

Use your 3D printer with ease! The Mywerkz 1.75 PLA Filament is small in diameter for precision printing, and is made of high-quality material so your objects are always printed smoothly and easily. A 1kg spool with 1.25-inch inner diameter makes this a bargainï¾and easy to install! This filament works with any PLA compatible 3D printer, making it universal, and with a wide selection of colors available, the sky's the limit on your printing!HighlightsPremium quality PLA filament at discount price<.05mm filament diameter tolerance & ships with silica gel to stay bone-dry1kg spool with 1.25" spool inner diameterWorks with any 3D printer that prints standard PLA filament spoolsWood Primary Color BROWNMarketing Color WoodReturnable YesQualifies for Free Shipping YesBox Dimensions 4" L x 7" W x 7" HSpecial Features Less than 0.05 mm Filament Diameter Tolerance & Ships with Silica Gel to Stay Bone-DryPremium Quality PLA Filament at Discount PriceVacuum Sealed on Extrusion with Silica GelDiameter 1.25 (Spool ID) inch

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Fluorescent Yellow

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Fluorescent Yellow

54.99 USD

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Fluorescent Yellow Compatible Devices ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230° C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Silver

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Silver

54.99 USD

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Silver Compatible Devices ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230° C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Blue

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Blue

54.99 USD

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Blue Compatible Devices ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230° C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Gold

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Gold

54.99 USD

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Gold Compatible Devices ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230° C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Pink

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Pink

54.99 USD

Premium 3D Printer Filament ABS 1.75MM 1kg/spool, Pink Compatible Devices ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending. This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230° C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. Reel Dimensions: Reel Diameter: 195mm (7.68") Hub Diameter: 95mm (3.74") Spindle Diameter: 38mm (1.50") Reel Width: 80mm (3.15")

Velleman VM8201 STAND-ALONE CONTROLLER FOR 3D PRINTER

Velleman VM8201 STAND-ALONE CONTROLLER FOR 3D PRINTER

78.91 USD

Fully operate your 3D printer with this module! No computer needed (slicing of 3D object and saving to SD-card still needs to be done on a computer)., Prints .GCODE files that are saved on a regular SD-card (SD-card NOT INCLUDED)., Encoder based control., Real time temperature display and control of the extruder and heated bed temperature., Connect to the K8200 controller board with the included flat cable, no extra power supply needed., Enclosure can be printed using .STL file available from Velleman K8200 website., Fully assembled and tested unit. Connection cable requires soldering., SD card slot, Reset button., 4 x 20 character LCD display with backlight., Dimensions: 80 x 50 x 45 mm / 3.15 x 1.96 x 1.77

Cloth Cord Set & Filament Bulbs by Roost

Cloth Cord Set & Filament Bulbs by Roost

192.0 USD

"Cloth Cord Set by RoostMuch more than mere illumination, lighting informs the mood of a room. Our cloth Cord Sets and Filament Bulbs instantly add jolts of interest to any space. Available in four colors, the pendants feature unglazed porcelain sockets. Pair with one of our Filament Bulbs for electrical effect. 15 foot long plug end.Each color of the Cloth Cord comes in set of 4.Filament Light Bulbs are sold separately using the link below.Set of 4 Includes One of Each:A - Sky  B - Cloud D - Sea E - Moss  If showing Quick Ship, item ships out within 1-2 business days. Otherwise, please allow 1-2 weeks to ship out and receive tracking. Contact us to see about expedited shipping options. "

Kodak LED 40603 A19 LED Filament Edison

Kodak LED 40603 A19 LED Filament Edison

27.72 USD

Spotlite Filament LED Lamps provide a 360 degree beam angle. This lamp continues the more than 100 years of tradition of preferring incandescent bulbs. Delivering incandescent-like sparkling light effects, LED Filament bulbs are ideal for general and decorative lighting in the hospitality industry, as well as home environments. The lamp employs Linear LED filaments. The lamp is available in A19 form as well as Candle form.Dimmable Non-Dimmable Non-flickering Instant-on Glare-free No UV No IR Linear LEDBeam Angle: 360 Bulb Base: E26 Bulb Type: LED CCT: 2700 CRI: 82 Dimmable: No Halogen Fluorescent Equivalent: 75W Input: 120V Lumens: 900 Rated Life Hours: 30000 Watts: 8

Monoprice Premium 3D Printer Filament 1.75MM 0.1kg/spool  Cleaning Filament

Monoprice Premium 3D Printer Filament 1.75MM 0.1kg/spool Cleaning Filament

21.94 USD

Keep the nozzles and extruders on your 3D printer printing like new using this 1.75mm Cleaning Filament from Monoprice!It is a good idea to periodically clean the nozzles and extruders on your 3D printer to ensure that they feed filament smoothly and evenly. It is also good to clean when switching filament colors or material types. This cleaning filament is designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament.To clean using this filament; simply print about 12" of material. It prints at a wide 160 ~ 260°C temperature range.

XYZprinting da Vinci Jr. 1.0 FFF (Fused Filament Fabrication) PLA Single Nozzle 3D Printer

XYZprinting da Vinci Jr. 1.0 FFF (Fused Filament Fabrication) PLA Single Nozzle 3D Printer

219.99 USD

XYZprinting da Vinci Jr. 1.0 FFF (Fused Filament Fabrication) PLA Single Nozzle 3D Printer Series: da Vinci Part Number: da Vinci Jr. 1.0 Number of Extruders: 1 Build Material: PLA Filament Filament Diameter: 1.75mm Connectivity: USB 2.0 / SD Card / WiFi Systems are compatible with SDHC cards up to 32GB in size Interface: USB 2.0, SD card (32G MAX) Operation System Requirements: Windows 7 above (for PC) Mac OSX 10.8 above 64-bit (for Mac) Note: Stardard VGA driver on operating system, or a graphics card doesn't support OpenGL 2.1, may cause unknown error in XYZware.

Kodak LED 41084 G25 Filament Bulb

Kodak LED 41084 G25 Filament Bulb

17.73 USD

Spotlite Filament LED Lamps provide a 360 degree beam angle. This lamp continues the more than 100 years of tradition of preferring incandescent bulbs. Delivering incandescent-like sparkling light effects, LED Filament bulbs are ideal for general and decorative lighting in the hospitality industry, as well as home environments. The lamp employs Linear LED filaments.Dimmable Non-flickering No UV No IR Instant-onBeam Angle: 360 Bulb Base: E26 CCT: 2700 CRI: 82 Dimmable: Yes Halogen Fluorescent Equivalent: 25W Input: 120V Lumens: 400 Rated Life Hours: 40000 Watts: 4

Kodak LED 41083 G16.5 Filament Bulb

Kodak LED 41083 G16.5 Filament Bulb

13.5 USD

Spotlite Filament LED Lamps provide a 360 degree beam angle. This lamp continues the more than 100 years of tradition of preferring incandescent bulbs. Delivering incandescent-like sparkling light effects, LED Filament bulbs are ideal for general and decorative lighting in the hospitality industry, as well as home environments. The lamp employs Linear LED filamentsDimmable Non-flickering No UV No IR Instant-onBeam Angle: 360 Bulb Base: E12 CCT: 2700 CRI: 82 Dimmable: Yes Halogen Fluorescent Equivalent: 45W Input: 120V Lumens: 250 Rated Life Hours: 30000 Watts: 4

Kodak LED 42004 ST-64 Amber Filament

Kodak LED 42004 ST-64 Amber Filament

35.91 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy eficient. The amber lens reduces the color temperature by 200K. Therefore 2700K will appear as 2500K.Aluminum housing amber glass lens E26 base Dimmable No UV No IRBase: E26 Beam Angle: 360 CCT: 2700K CRI: 80 Dim: Yes Halogen Fluorscent Equivalent: 80W Input: 120V Lumens: 800 Rated Life Hours: 30000 Watts: 8

Luminous Crucifix - 1.75 inch

Luminous Crucifix - 1.75 inch

1.69 USD

The Luminous Crucifix is the perfect sized crucifix for creating your own rosary, stringing on a cord or chain as a necklace or attaching to a key ring or charm bracelet. This small white crucifix is made of wood and wrapped in silver metal backing and end tabs. The corpus is made of the same silver metal and stands out beautifully against the white cross. The Luminous Crucifix is the perfect gift for Religious Education classes and other Faith Formation groups. &nbsp;

Kodak LED 41100 ST64 Filament Bulb

Kodak LED 41100 ST64 Filament Bulb

24.12 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy efficient.Dimmaable No UV No IR Aluminum Housing Clear Glass LensBeam Angle: 360 Bulb Base: E26 CCT: 2700 CRI: 80 Dimmable: Yes Halogen Fluorescent Equivalent: 60W Input: 120V Lumens: 630 Rated Life Hours: 40000 Watts: 6

Kodak LED 41098 ST64 Filament Bulb

Kodak LED 41098 ST64 Filament Bulb

20.52 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy efficient.Dimmaable No UV No IR Aluminum Housing Clear Glass LensBeam Angle: 360 Bulb Base: E26 CCT: 2700 CRI: 80 Dimmable: Yes Halogen Fluorescent Equivalent: 40W Input: 120V Lumens: 470 Rated Life Hours: 40000 Watts: 4

Kodak LED 41099 ST64 Filament Amber

Kodak LED 41099 ST64 Filament Amber

23.13 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy efficient.Dimmaable Aluminum Housing Amber Glass Lens No UV No IRBeam Angle: 360 Bulb Base: E26 CCT: 2700 CRI: 80 Dimmable: Yes Halogen Fluorescent Equivalent: 40W Input: 120V Lumens: 470 Rated Life Hours: 40000 Watts: 4

Kodak LED 41101 ST64 Filament Amber

Kodak LED 41101 ST64 Filament Amber

28.44 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy efficient.Dimmaable Aluminum Housing Amber Glass Lens No UV No IRBeam Angle: 360 Bulb Base: E26 CCT: 2700 CRI: 80 Dimmable: Yes Halogen Fluorescent Equivalent: 60W Input: 120V Lumens: 630 Rated Life Hours: 40000 Watts: 6

Kodak LED 41102 ST64 Filament Bulb

Kodak LED 41102 ST64 Filament Bulb

19.62 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy efficient.Dimmaable No UV No IR Aluminum Housing Clear Glass LensBeam Angle: 360 Bulb Base: E26 CCT: 2700 CRI: 80 Dimmable: Yes Halogen Fluorescent Equivalent: 20W Input: 120V Lumens: 230 Rated Life Hours: 40000 Watts: 2

Kodak LED 41096 S14 Filament - Edison Bulb

Kodak LED 41096 S14 Filament - Edison Bulb

21.15 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy efficient.Non-Dimmable No UV No IRBeam Angle: 360 Bulb Base: E26 Bulb Type: Halogen CCT: 2700 CRI: 82 Dimmable: Yes Halogen Fluorescent Equivalent: 40W Input: 120V Lumens: 360 Rated Life Hours: 40000 Watts: 4

Kodak LED 41085 S14 Filament - Edison Bulb

Kodak LED 41085 S14 Filament - Edison Bulb

17.1 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy efficient.Non-Dimmable No UV No IRBeam Angle: 360 Bulb Base: E26 Bulb Type: Halogen CCT: 2700 CRI: 82 Dimmable: Yes Halogen Fluorescent Equivalent: 20W Input: 120V Lumens: 190 Rated Life Hours: 40000 Watts: 2

Kodak LED 42081 ST-64 Clear Filament

Kodak LED 42081 ST-64 Clear Filament

35.1 USD

This vintage looking light bulb is in the form of the historic original Edison light bulb. This nostalgic bulb is great for chandeliers and sconces. Although this bulb appears antique it uses linear LED filaments and is incredibly energy eficient.Dimmable No UV No IRBase: E26 Beam Angle: 360 CCT: 2700K CRI: 80 Diameter: 2-1 2 Dim: Yes Halogen Fluorscent Equivalent: 80W Height: 5-3 8 Input: 120V Lumens: 800 Rated Life Hours: 30000 Watts: 8

Wiiboox One Mini Desktop 3D Printer, Single Extruder, 100 Micron

Wiiboox One Mini Desktop 3D Printer, Single Extruder, 100 Micron

979.0 EUR

Wiiboox One Mini Desktop 3D Printer, Single Extruder, 100 Micron Series: One Part Number: CCP0000011 Number of Extruders: 1 Body Material: Metal Frame w/ Acrylic Covers Chassis Material: Metal Frame w/ Acrylic Covers Build Material: Build Material: PLA/ABS, Platform material:Acrylic With Tape Positioning Precision: 2.5 microns(z-axis), 11 microns (x-axis and y-axis) Filament Diameter: 1.75mm

Artifex 2 Duo 3D Printer - Fully Assembled

Artifex 2 Duo 3D Printer - Fully Assembled

1931.91 EUR

Artifex 2 Duo 3D Printer - Fully Assembled Series: Artifex 2 Part Number: ARTIFEX2D-BA Number of Extruders: 2 Build Material: PLA, ABS, NinjaFlex, HIPS, PVA Positioning Precision: X/Y - 12.5micron (0.0005 in), Z - 0.66micron (0.000026in) Filament Diameter: 1.75mm Cartridge Capacity: PLA, ABS, NinjaFlex, HIPS, PVA Connectivity: USB, LCD (SD Card)

Artifex 2 Duo 3D Printer - Complete Kit

Artifex 2 Duo 3D Printer - Complete Kit

1554.03 EUR

Artifex 2 Duo 3D Printer - Complete Kit Series: Artifex 2 Part Number: ARTIFEX2D-BC Number of Extruders: 2 Build Material: PLA, ABS, NinjaFlex, HIPS, PVA Positioning Precision: X/Y - 12.5micron (0.0005 in), Z - 0.66micron (0.000026in) Filament Diameter: 1.75mm Cartridge Capacity: PLA, ABS, NinjaFlex, HIPS, PVA Connectivity: USB, LCD (SD Card)

Artifex 2 3D Printer - Complete Kit

Artifex 2 3D Printer - Complete Kit

1412.33 EUR

Artifex 2 3D Printer - Complete Kit Series: Artifex 2 Part Number: ARTIFEX2-BC Number of Extruders: 1 Build Material: PLA, ABS, NinjaFlex, HIPS, PVA Positioning Precision: X/Y - 12.5micron (0.0005 in), Z - 0.66micron (0.000026in) Filament Diameter: 1.75mm Cartridge Capacity: PLA, ABS, NinjaFlex, HIPS, PVA Connectivity: USB, LCD (SD Card)

FlashForge Dreamer 3D Printer

FlashForge Dreamer 3D Printer

998.99 USD

Flashforge Dreamer 3D Printer Series: Dreamer Number of Extruders: 2 Positioning Precision: 0.0001" on Z axis, 0.0004" on XY plane Cartridges Compatible: ABS/PLA/Dissolvable Filament Compatibl Interface: USB, WiFi, SD card, App connectivity 2GB SD Card Printer Dimensions: 18.40" x 15.00" x 12.60" Printer Weight: 27.00 lbs.

Kodak LED 42049 Faceted Pyramid 2 Filament

Kodak LED 42049 Faceted Pyramid 2 Filament

28.71 USD

Such a beautiful light bulb. These faceted bulbs have great “charisma” These lights bring a lot of atmosphere to your homeDimmable True 60W replacement Non-flickering No UV No IRBase: E26 Beam Angle: 360 CCT: 2200K CRI: 82 Dim: Yes Halogen Fluorscent Equivalent: 60W Input: 120V Lumens: 600 Rated Life Hours: 30000 Watts: 6

Print Rite CoLiDo 2.0 3D Printer

Print Rite CoLiDo 2.0 3D Printer

999.99 USD

Print Rite CoLiDo 2.0 3D Printer Part Number: LMD011XQ7J Body Material: Steel Build Material: PLA/ABS Filament Diameter: 1.75mm Connectivity: USB and SD card Operation System Requirements: Window 7, MAC OX, Linus Operation Temperature: 15º - 32ºC (60º - 90ºF) Storage Temperature: 0º - 32ºC (32º - 90ºF)

Kodak LED 42014 Faceted Pyramid 1 Filament

Kodak LED 42014 Faceted Pyramid 1 Filament

28.71 USD

Such a beautiful light bulb. These faceted bulbs have great “charisma” These lights bring a lot of atmosphere to your homeDimmable Non-flickering No UV No IRBase: E26 Beam Angle: 360 CCT: 2200K CRI: 82 Dim: Yes Halogen Fluorscent Equivalent: 60W Input: 110V Lumens: 600 Rated Life Hours: 30000 Watts: 6

Kodak LED 41105 T10 Filament Bulb

Kodak LED 41105 T10 Filament Bulb

32.31 USD

This tubular LED lamp uses linear LED filaments. Comes in various wattages. Energy saving.Dimmable Aluminum Housing Clear Glass Lens No UV No IRBeam Angle: 360 Bulb Base: E26 CCT: 2700 CRI: 82 Dimmable: Yes Halogen Fluorescent Equivalent: 60W Input: 120V Lumens: 660 Rated Life Hours: 40000 Watts: 6

Monoprice 12131 - 3D Printer Extruder Heating Assembly Replacement

Monoprice 12131 - 3D Printer Extruder Heating Assembly Replacement

77.28 USD

Monoprice 12131 - 3D Printer Extruder Heating Assembly ReplacementThis is a replacment 3D Printer Extruder Heating Assembly for the Monoprice Dual Extrusion ABS/PLA/PVA 3D Printer (PID 11614).This extruder heating assembly melts the 3D filament and extrudes it through the 0.4mm nozzle.

Filament Silver Dust Twelve-Light Chandelier

Filament Silver Dust Twelve-Light Chandelier

1566.0 USD

- Raymond Waites Filament has a luxurious glamour and fresh appeal ! Stacked K9 crystals add shine and sparkle that is reflected by a rich Silver Dust finish. This elegant group is today?s lighting classic. - Includes 10 feet of chain and 12 feet of wire

Filament Silk Thermal Pant - Mens

Filament Silk Thermal Pant - Mens

49.95 USD

A versatile knit fabric that maximizes silk’s superb body-insulating ability. Lightweight yet incredibly strong, the silk jersey knit is supple and sumptuous with a natural stretch for all-day comfort.