Vidgrids » barrel mount picatinny rail

barrel mount picatinny rail

Advantage Rail? Portable Bariatric

Advantage Rail? Portable Bariatric

543.0 USD

A pivoting and locking horizontal rail that secures and releases from a low profile, floor mounted plate. Install additional floor plates to use Advantage Rail? in multiple locations. Comes with 1 floor plate. Additional floor plates sold separately.Excellent where ceiling restrictions prevent a floor to ceiling pole. Perfect beside a toilet, bath, bed, or chair.Simple. A gentle lift unlocks the rail to start it moving. Keep the rail up to move freely. Let the rail down to lock. Provides 8 locking positions. Height adjustable.Safe, Effective Support. Push or pull on the rail to assist with sitting, standing and moving. To help prevent a forward fall, the rail will lock if released. Reduce Caregiver Strain. Maximize the use of available strength while a caregiver supervises. Promotes safe and independent movement.Weight Capacity: 450lbs Rail Diameter: 1.25"/3.175cm. Rail Length: 17"/43cm. Horizontal Rail Height Range: 30-38"/76-97cm. Pole Diameter: 1.5"/3.81cm. Pole Height: 54"/137cm. Floor Plate Diameter: 7.5"/19cm. Latex free grip.

Advantage Rail? Portable

Advantage Rail? Portable

410.0 USD

A pivoting and locking horizontal rail that secures and releases from a low profile, floor mounted plate. Install additional floor plates to use Advantage Rail? in multiple locations. Comes with 1 floor plate. Additional floor plates sold separately.Excellent where ceiling restrictions prevent a floor to ceiling pole. Perfect beside a toilet, bath, bed, or chair.Simple. A gentle lift unlocks the rail to start it moving. Keep the rail up to move freely. Let the rail down to lock. Provides 8 locking positions. Height adjustable.Safe, Effective Support. Push or pull on the rail to assist with sitting, standing and moving. To help prevent a forward fall, the rail will lock if released. Reduce Caregiver Strain. Maximize the use of available strength while a caregiver supervises. Promotes safe and independent movement.Weight Capacity: 300lbs Rail Diameter: 1.25"/3.175cm. Rail Length: 17"/43cm. Horizontal Rail Height Range: 30-38"/76-97cm. Pole Diameter: 1.5"/3.81cm. Pole Height: 54"/137cm. Floor Plate Diameter: 7.5"/19cm. Latex free grip.

Advantage Rail?

Advantage Rail?

311.0 USD

Advantage Rail? A floor mounted pivoting and locking horizontal rail. Excellent where ceiling restrictions prevent a floor to ceiling pole. Perfect beside a toilet, bath, bed, or chair.Simple. A gentle lift unlocks the horiztontal rail to start it moving. Keep the rail up to move freely. Let the rail down to lock. -Provides 8 locking positions. -Height adjustable. -Safe, Effective Support. -Push or pull on the rail to assist with sitting, standing and moving. -To help prevent a forward fall, the rail will lock if released. -Reduce Caregiver Strain. -Maximize the use of available strength while a caregiver supervises. -Promotes safe and independent movement. -Weight Capacity: 300lbs -Rail Diameter: 1.25"/3.175cm. -Rail Length: 17"/43cm. -Horizontal Rail Height Range: 30-38"/76-97cm. -Pole Diameter: 1.5"/3.81cm. -Pole Height: 54"/137cm. -Floor Plate Diameter: 7.5"/19cm. -Latex free grip. -Please note, mounting hardware is not included.

Smart-Rail?

Smart-Rail?

155.0 USD

An impressive bed assist rail that unlocks and swings open. Provides assistance with getting into and out of bed, in bed positioning, and standing. Fits twin to king size beds.Easy To Install. Simply slide the support frame between box spring and mattress, and secure with the safety strap. Rail is height adjustable. Ideal Support. Unlike fixed bedrails, the Smart-Rail? unlocks and swings open to provide improved standing support at bedside. Well placed support can help to reduce the risk of fall related injuries by eliminating the need to reach and twist. Independence. With secure, reliable support placed exactly where needed, there is less help required by a caregiver. Encourages confidence and independence.Weight Capacity: 300lbsRail Diameter: 0.875"/2.22cm. Rail Height: 31.5"/80cm. Rail Width: 16.5?/42cm. Support Frame: 32x21.25"/82x54cm. Latex free grip.Optional Leg Extenders: Increase standard rail height 31.5"/80cm up to 34.5"/88cm

Advantage Rail? Bariatric

Advantage Rail? Bariatric

443.0 USD

A floor mounted pivoting and locking horizontal rail with an increased weight capacity of 450lbs. Excellent where ceiling restrictions prevent a floor to ceiling pole. Perfect beside a toilet, bath, bed, or chair.Simple. A gentle lift unlocks the horiztontal rail to start it moving. Keep the rail up to move freely. Let the rail down to lock. Provides 8 locking positions. Height adjustable.Safe, Effective Support. Push or pull on the rail to assist with sitting, standing and moving. To help prevent a forward fall, the rail will lock if released. Reduce Caregiver Strain. Maximize the use of available strength while a caregiver supervises. Promotes safe and independent movement.Weight Capacity: 450bsRail Diameter: 1.25"/3.175cm. Rail Length: 17"/43cm. Horizontal Rail Height Range: 30-38"/76-97cm. Pole Diameter: 1.5"/3.81cm. Pole Height: 54"/137cm. Floor Plate Diameter: 7.5"/19cm. Latex free grip.

Setina Single T-Rail Mount System

Setina Single T-Rail Mount System

536.99 USD

Mounted Weapons Systems Single Mounting

Proven Value And Performance
New universal T-Rail Mounting System

New T-Rail mounting system allows for weapon flexibility and unlimited vertical adjustments. Available w/ center channel, ideal for the mounting of auxiliary equipment such as a rechargeable flashlight.

  • One Two Weapons Can Be Mounted
  • Designed To Fit Small And Large Gun Locks
  • Optional Handcuff Key Locks
  • Electric Gun Locks With Key Lock Override
  • Include 10 Second Timer With Push Button Switch
  • Universal Butt Plate Fits Most Weapons
  • Easy Installation With Center Conduit For Easy Wiring
  • Rugged Powder-Coated Finish
  • Fits Recessed Panel or Flat Panel Partitions
  • Free standing additional charge

Wall Mount Plate for PT Rail?

Wall Mount Plate for PT Rail?

123.0 USD

A cost effective alternative to opening walls and creating structural reinforcements prior to mounting P.T. Rails?. Mounts securely to structural studs overtop drywall.Features 6 pre-drilled holes reinforced with T-Nut fasteners for ease of fastening. Can be painted or stained to suit the users environment. Allows for rail to be mounted at one of three fixed widths (reverse for third location). Rail height must be determined at time of installation. Finish: Wood Grain, Plywood Wall Plate: 20"x18"/51x46cm. Material: High quality 11-ply wood construction..

I-Star Tc-Rail-24 Rack Slide Rail Kit

I-Star Tc-Rail-24 Rack Slide Rail Kit

42.43 USD

iStarUSA TC-RAIL-24 24" Sliding Rail Kit for Most Rackmount ChassisProduct Features The TC-Rail-24 is a ball bearing sliding rails built from SECC steel. The rail is built to last and can hold system weight up to 85 lbs. Increase your accessibility to your rackmount server with this easy to install rackmount sliding rails.Specifications: Model Number: TC-RAIL-24RoHS Compliance Version: YesStandard Drive Bays: NoneMaterial of Main Chassis: 1.2mm SECC SteelSupported Chassis Depth: up to 27"Supported Cabinet Depth: 26" to 39" (front mounting posts to rear posts)

Barrel of Fish

Barrel of Fish

38.99 USD

Inviting 8 diameter barrel encourages children to reach through the soft slotted top to feel and guess what's inside. Provides many opportunities to practice and build tactile awareness and discrimination skills. In addition activities with the feely barrel are easy to adjust to a wide range of ages and skill levels. Sturdy fabric barrel is constructed of ribbed corduroy lined with cotton. Comes with six 6 soft fabric fish with embroidered eyes on both sides - fun to put into and pull out of the barrel. Both barrel and fish are machine washable and dryable.

A&K Airsoft SR25K AEG Long Barrel Top Rail Version - BLACK

A&K Airsoft SR25K AEG Long Barrel Top Rail Version - BLACK

262.95 USD

NOTE: This item is exempt from expedited shipping and may take up to three business days to process and ship.

Features:
- Flip-up Front/Rear Sights
- Monolithic Top Rail
- Quad RIS Handguard
- Adjustable Rifle Stock
- One Piece Outer Barrel

Specifications:
PTS Syndicate Airsoft Unity Tactical Fusion Modular Rail Mount System

PTS Syndicate Airsoft Unity Tactical Fusion Modular Rail Mount System

69.99 USD

NOTE: This item is exempt from expedited shipping and may take up to three business days to process and ship.

Features:
- HUB, the heart of the Fusion system mounted on the handguard rail to which all the other components are attached to, creating various configurations.
- Extension, a rail

Well Airsoft L96 AWS BOLT Action Rifle Metal Barrel Optics Rail - TAN

Well Airsoft L96 AWS BOLT Action Rifle Metal Barrel Optics Rail - TAN

142.95 USD

NOTE: This item is exempt from expedited shipping.


Features:
- Tough ABS Plastic Construction
- Aluminum Aluminum Outer Barrel
- Top Rail to add your Favorite Scope
- Fixed Stock w/ Cheek Rest

- Sling Mounts

Specifications:
Operat

Well Airsoft L96 BOLT Action Rifle w/ Fluted Barrel Optics Rail - TAN

Well Airsoft L96 BOLT Action Rifle w/ Fluted Barrel Optics Rail - TAN

148.95 USD

NOTE: This item is exempt from expedited shipping.


Features:
- Tough ABS Plastic Construction
- Fluted Aluminum Outer Barrel
- Top Rail to add your Favorite Scope
- Fixed Stock w/ Cheek Rest

- Sling Mounts

Specifications:
Operatio

Cyma Aluminum MK5 RIS Handguard with Rail Covers and Outer Barrel

Cyma Aluminum MK5 RIS Handguard with Rail Covers and Outer Barrel

41.95 USD

NOTE: This item is exempt from expedited shipping and may take up to three business days to process and ship.

Features:
-Durable aluminum construction
-20mm tri-rail system for multiple tactical accessory attachment
-Includes metal outer barrel
-Includes tw

Lancer Tactical Airsoft Helmet Rail Mount Set - BLACK

Lancer Tactical Airsoft Helmet Rail Mount Set - BLACK

10.0 USD

NOTE: This item is exempt from expedited shipping and may take up to three business days to process and ship.

Features:
-Tough ABS Plastic Build
-Convert ARC Rails to Picatinny RIS
-Allows Use of RIS Accessories
-Installs Easily
-Lightweight and Compact
NcStar Flip-to-Side 30mm Magnifier Optics Mount w/ QD Picatinny Mount

NcStar Flip-to-Side 30mm Magnifier Optics Mount w/ QD Picatinny Mount

23.95 USD

Our take: This flip-to-side optic mount overlays your scope with a 30mm magnifier optic that can be employed at the push of a button. When activated, this mount places the magnifier centerline at 1.5" above the receiver and aligned with your regular rifle optic, providing an enhanced view of

Asura Dynamics Aluminum AK Vertical Fore Grip w/ 20mm Picatinny Mount

Asura Dynamics Aluminum AK Vertical Fore Grip w/ 20mm Picatinny Mount

31.95 USD

Our take: The Asura Dynamics AK Vertical Fore Grip is a lightweight aluminum vertical grip that mounts to most Weaver and Picatinny rail systems. The cut-off design is also hollow, which serves to eliminate excess weight on the fore end of your airsoft gun. This improves the maneuverability of the weapon and also

NcStar 30mm Cantilever Optic QD Mount For Picatinny/Weaver RIS

NcStar 30mm Cantilever Optic QD Mount For Picatinny/Weaver RIS

39.95 USD

Our take: Rail space is a precious commodity and this 30mm Cantilever Optic Mount makes sure that you have as much as possible at your disposal. In addition to providing increased area on the RIS for mounting, this cantilever mount also increases eye relief and opens new doors for modular optic configurations. The locking QD mount is fully adjustable and locks tightly to Picatinny and Weaver type rail systems with just a flick of the side-mounted lever. When mounted, the cantile

Firepower Ergo Strike Picatinny Mounted XL Tactical Foregrip - BLACK

Firepower Ergo Strike Picatinny Mounted XL Tactical Foregrip - BLACK

20.95 USD

Our take: The Firepower Ergo Strike XL Tactical Foregrip is one of the most lightweight and durable full sized vertical foregrips on the market. This skeleton grip is injection molded from a lightweight, high-impact polymer so all the unnecessary weight is eliminated, which actually serves to improve the functionality of this Picatinny rail accessory. Cutting foregrip weight to a bare minimum gives the shooter greater weapon control by decreasing fatigue and increasing mobility.

Firepower Ergo Strike Picatinny Mounted XL Tactical Foregrip - TAN

Firepower Ergo Strike Picatinny Mounted XL Tactical Foregrip - TAN

20.95 USD

Our take: The Firepower Ergo Strike XL Tactical Foregrip is injection molded from high-impact polymer into a lightweight skeleton grip design. The skeleton style design aesthetics serve to improve the functionality of this vertical foregrip by cutting weight to a bare minimum. Less weight on the fore-end means increased weapon control and decreased fatigue. To further enhance the ergonomics of this tactical foregrip, an

AIM Sports Picatinny Rail Riser Mount Low-Profile Adapter - BLACK

AIM Sports Picatinny Rail Riser Mount Low-Profile Adapter - BLACK

9.95 USD

Our take: Have you ever walked away from an airsoft skirmish with a painful crick in your neck from dropping your eye level to aim down the sights? The Low Profile 0.5" Riser Mount from AIM Sports will help to alleviate this issue. By raising the mounting surface a half inch, you can now bring your chosen optic or rifle sight up to your eye level, instead of the other way around. This mount isn't only designed for optics, however. Many

Magpul AFG Angled Fore Grip for Airsoft Picatinny RIS - GRAY

Magpul AFG Angled Fore Grip for Airsoft Picatinny RIS - GRAY

36.95 USD

This component is ONLY available for sale through the AMS Custom Gun Builder.

Our take: The Magpul AFG Angled Fore Grip provides a stable user interface on your RIS while taking into account natural body mechanics. This integration of body and airsoft gun works to improve comfort and weapon handling while decreasing fatigue. Compatible with all Picatinny RIS

Magpul AFG Angled Fore Grip for Airsoft Picatinny RIS - BLACK

Magpul AFG Angled Fore Grip for Airsoft Picatinny RIS - BLACK

36.95 USD

This component is ONLY available for sale through the AMS Custom Gun Builder.

Our take: The Magpul AFG Angled Fore Grip provides a stable user interface on your RIS while taking into account natural body mechanics to improve comfort and weapon handling while decreasing fatigue. While it is similar in function to a basic

Magpul PTS RSA Rail Sling Attachment Rail/RIS Equipped Rifles

Magpul PTS RSA Rail Sling Attachment Rail/RIS Equipped Rifles

31.95 USD

From Magpul:  The RSA provides a forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. Made from precision cast black manganese phosphatized steel, the RSA attaches to any MIL-STD-1913 Picatinny/STANAG 4694 rail. The RSA has been proven to withstand stress tests of over 300 pounds yet weighs a mere 1.3 ounces.

Our take:  The Magpul PTS RSA Rail Sling Attachment is a durable and cost-ef

CYMA C52 MP5 Full Metal Handguard Rail System RIS w/ Outer Barrel

CYMA C52 MP5 Full Metal Handguard Rail System RIS w/ Outer Barrel

27.95 USD

Our take:  The CYMA MP5 Tactical Handguard RIS Rail System is the perfect modular external upgrade for your MP5-style AEG.  Crafted from solid yet lightweight aluminum, this rail system is the perfect platform for adding your rail mounted accessories such as foregrips, lights, lasers, and even grenade launchers!  As an added value, this rail system comes fully equipped with a standard vertical grip and two accessory rail covers, providin

Golden Eagle 4X Picatinny / Weaver 20mm Airsoft Rail Covers - BLACK

Golden Eagle 4X Picatinny / Weaver 20mm Airsoft Rail Covers - BLACK

9.99 USD

Our take:  The Golden Eagle 20mm Picatinny / Weaver Airsoft Rail Covers quickly and easily attach to most airsoft rail segments.  They’re effective in preventing “rail bite,” the painful pressure applied from extended periods of gripping uncovered metal rails.  Each Golden Eagle 20mm Picatinny / Weaver airsoft rail cover comes in

Golden Eagle Metal 10.5" Picatinny Free Float Rail System RIS - TAN

Golden Eagle Metal 10.5" Picatinny Free Float Rail System RIS - TAN

79.95 USD

Our take:  The NEW Golden Eagle Free Float Rail System is a great full metal quad rail with over 40 inches of combined rail space.  As with any RIS system, these rails allow you to attach your favorite weapon accessories and accommodate most 1913 Picatinny rail and Weaver rail accessories.  This airsoft free floating rail is made entirely from aircraft-grade aluminum, making it durable yet lightweight to increase maneuverability.  This 10.5-inch rail is short

WellFire Full Metal Tri-Rail MB01 Airsoft Bipod Mount

WellFire Full Metal Tri-Rail MB01 Airsoft Bipod Mount

7.95 USD

NOTE: This item is exempt from expedited shipping and may take up to three business days to process and ship.

Our take:  Having a bipod on your sniper rifle provides improved stability in multiple shooting positions.  Whether you’re mounting your rifle on top of hard cover or shooti

APS Evolution Tech 9 Slot KeyMod Adaptive Aluminum Picatinny Rail

APS Evolution Tech 9 Slot KeyMod Adaptive Aluminum Picatinny Rail

11.95 USD

Our take:  The APS Evolution Tech 114mm x 20mm Airsoft KeyMod Rail Segment is a full metal 20mm rail segment designed to mount easily onto the APS Evolution Tech KeyMod Handguards.  This rail segment has 9 slots, giving you enough space to mount accessories like flashlights and laser units.  It’s also compatible with most

SHS Airsoft AK Rear Sight Mount Aluminum Picatinny Rail

SHS Airsoft AK Rear Sight Mount Aluminum Picatinny Rail

32.95 USD

Our take: Many traditional AK series rifles have very limited modular capabilities, and attaching any kind of optic would mean using an unbalanced and cumbersome side-mount. The SHS AK Rear Sight Mount transcends those bulky and cumbersome sight mounts and allows you to attach a scope,

AIM Sports Picatinny Rail Riser Mount Medium-Profile Adapter - BLACK

AIM Sports Picatinny Rail Riser Mount Medium-Profile Adapter - BLACK

9.95 USD

Our take: Sighting through some airsoft optics can, quite literally, be a pain in the neck. With the inclusion of the AIM Sports Medium Profile Riser Mount in your loadout you can quickly and easily alleviate this issue. But this riser mount is not designed specifically for optics and can be used to alter the mounting of any 20mm Weaver or Picatinny rail accessory. Whether its a short vertical foregrip, a

APS Airsoft ACP 5 Slot Picatinny 20mm Adapter Rail Sight - BLACK

APS Airsoft ACP 5 Slot Picatinny 20mm Adapter Rail Sight - BLACK

10.95 USD

Our take:  The APS Airsoft Picatinny Adapt Rail Sight, constructed of full metal, is 100% compatible with the APS Action Combat Pistol CO2 Pistol.  This Picatinny rail works great with the airsoft ACP and even includes two white dots that makes this adapter rail double as a the rear sights of the pistol without having to remove the rail.  The

Magic Box Airsoft 6.06mm 469mm AEG "Miracle Barrel" Inner Barrel

Magic Box Airsoft 6.06mm 469mm AEG "Miracle Barrel" Inner Barrel

70.95 USD

Features:
-CNC Steel Manufactured
-Precision Inner Surface Polished
-Tight Air Seal Design
-Smooth and Slick Surface
-Lightweight and Compact
-Increased Accuracy
-Increased Velocity
-Increased Range

Specifications:
Material: Brass
Diameter: 6.06mm
Length: 469mm
Weight: 3.5 oz

Package includes: 1x 469mm Miracle Barrel

Color: BRASS

Magic Box Airsoft 6.06mm 500mm AEG "Miracle Barrel" Inner Barrel

Magic Box Airsoft 6.06mm 500mm AEG "Miracle Barrel" Inner Barrel

70.95 USD

Features:
-CNC Steel Manufactured
-Precision Inner Surface Polished
-Tight Air Seal Design
-Smooth and Slick Surface
-Lightweight and Compact
-Increased Accuracy
-Increased Velocity
-Increased Range

Specifications:
Material: Brass
Diameter: 6.06mm
Length: 500mm
Weight: 3.5 oz

Package includes: 1x 500mm Miracle Barrel

Color: BRASS

Magic Box Airsoft 6.06mm 433mm AEG "Miracle Barrel" Inner Barrel

Magic Box Airsoft 6.06mm 433mm AEG "Miracle Barrel" Inner Barrel

70.95 USD

Features:
-CNC Steel Manufactured
-Precision Inner Surface Polished
-Tight Air Seal Design
-Smooth and Slick Surface
-Lightweight and Compact
-Increased Accuracy
-Increased Velocity
-Increased Range

Specifications:
Material: Brass
Diameter: 6.06mm
Length: 433mm
Weight: 3.4 oz

Package includes: 1x 433mm Miracle Barrel

Color: BRASS

Magic Box Airsoft 6.06mm 365mm AEG "Miracle Barrel" Inner Barrel

Magic Box Airsoft 6.06mm 365mm AEG "Miracle Barrel" Inner Barrel

70.95 USD

Features:
-CNC Steel Manufactured
-Precision Inner Surface Polished
-Tight Air Seal Design
-Smooth and Slick Surface
-Lightweight and Compact
-Increased Accuracy
-Increased Velocity
-Increased Range

Specifications:
Material: Brass
Diameter: 6.06mm
Length: 365mm
Weight: 3.4 oz

Package includes: 1x 365mm Miracle Barrel

Color: BRASS