MonopriceÂ® 12-Inch 150-Watt Powered Subwoofer, Black Compatible Devices 12-Inch 150-Watt Powered Subwoofer, Black When you want your bass down low, you need a subwoofer as part of your home audio/theater system. Monoprice has the basses covered with this 12 inch, 150 watt (RMS) Powered Subwoofer model! This 12" sub is capable of producing 150 watts RMS (200 watts peak) output. It has a frequency response range of 50 to 250 Hz with a low-pass crossover filter, which can be adjusted through the full range. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers. The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output. High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier. The High-Level output can be used to connect to your stereo/front speakers or you can connect them in parallel at the amplifier. Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer. The Line Level outputs can be used to daisy chain additional subwoofers to provide even more room-filling bass! The subwoofer is housed in an attractive wooden cabinet, with a black finish, and measures 17" x 17" x 16 7/8" (H x W x D). The driver fires out the front and is covered by a black cloth grill. A 3 1/2" sound port is positioned underneath the enclosure. An optional "Auto-On" function puts the subwoofer system into power-saving standby mode after about 2 minutes of no audio input detected. Alternatively, the "Auto-On" function can be disabled, allowing the unit to be on whenever the power switch is in the "on" position. A 2 amp/250 volt fuse protects the system from short circuits or power overloads.
MonopriceÂ® 8 Inch 60-Watt Powered Subwoofer - Black Compatible Devices 8 Inch 60-Watt Powered Subwoofer - Black This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers. The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output. High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier. Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer. The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill. An optional "Auto-On" function puts the subwoofer system into power-saving standby mode after about 2 minutes of no audio input detected. Alternatively, the "Auto-On" function can be disabled, allowing the unit to be on whenever the power switch is in the "on" position. A 2 amp/250 volt fuse protects the system from short circuits or power overloads. Please note that the manual/data sheet for this subwoofer incorrectly lists the top-end of the crossover as having a frequency of 250 Hz. In fact, the top-end of the crossover is at 150 Hz as listed on the control plate on the back of the speaker. However, the back plate of the unit indicates the low-end of the crossover as being 45 Hz, when it is in fact 50 Hz.
SKB 1SKB-FN-8 Amplified Powered Pedalboard - 5W Combo Amp, 6 speaker, 8-9VDC powerProduct Features SKB has been designing innovative pedalboards for guitar enthusiasts for more than 15 years. To keep up with technology and the needs of guitarists of all genres, SKB has developed the world?s first AC/DC pedalboard with a built-in combo amp featuring a 6? Eminence speaker. The 1SKB-FN-8 FootNote? Amplified Pedalboard is a fully powered pedalboard that will accommodate up to eight 9 volt DC pedals and can be taken anywhere, whether you find yourself on stage, on the street corner, in the garage or with headphones plugged in for a private session.Combo Amp5-Watt Class AB Amplifier with 6-inch 4 ohm Eminence Speaker.AUX / MP3 Input1/8? input (3.5mm) to connect an additional audio source such as mp3 players and monitor signals.Line OutConnect Hi-Z output directly to a live mixing board or studio recording console. Use a DI box if Lo-Z output is required.External Speaker OutputCapable of handling speaker loads down to 4 ohms. Connect to your favorite 1, 2 or 4x12 cab.Battery Compartment (DC Power)Built-in 6 D-cell battery compartment (Batteries not included).Power Output for PedalsEight 9VDC center negative outputs to power 9V battery-powered pedals (Pedals not included).Headphone Output1/8? output jack (3.5mm). Cable TesterChecks 1/4? audio / instrument cables to ensure that they are in good working order.Speaker On/Off SwitchTurns built-in speaker on or off. This switch does not have any effect when the External Speaker Jack is in use.AC Adapter1A 9VDC center negative AC adapter included.Connectors SwitchesPower-In Jack: Cable Tester Jack (A)Power On/Off Switch: Cable Tester Jack (B)External Speaker Jack: Treble KnobLine Out Jack: Bass KnobSpeaker On/Off Switch: Volume KnobHeadphone Jack: Pedal / Guitar JackPedal Power Jacks: AUX JackProduct DimensionsExterior Length: 22.28 inExterior Width: 21.89 inExterior Depth: 4.38 inPedal Mount Length: 19.00 inPedal Mount Width: 12.00 in
Pylepro (PASW18)- 1000 Watt 18'' Stage PA Subwoofer Cabinet The Pyle Pro PASW18 passive stage subwoofer is loaded with a Genuine Pyle Driver, so you know this subwoofer system has been assembled with the highest quality components. This speaker features Heavy Duty MDF (Medium-Density Fiberboard) construction with reinforced corners, Heavy Duty handles, and a vinyl wrapped enclosure, giving it the ability to withstand years of use and abuse, whether it be at live stage gigs, private parties, traveling DJ events, etc. The PASC18 features one 18'' Pyle Premium Woofer in a specially designed ported bass reflex enclosure which provides extended low frequency output. The 18'' Woofer features a 100 oz. magnet and a 3'' Kapton Voice Coil, for excellent signal response and precision reproduction of low end frequencies. If you are looking to put together a professional PA system at an affordable price, make Pyle Pro a top choice. Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear. * Heavy Duty MDF Construction w/Reinforced Corners * Black PVC Finish * 18'' Subwoofer 3'' Kapton VC * Woofer Magnet Weight: 100 oz * Ported Enclosure for Added Bass Response * Heavy Duty Handles for Easy Portability * Dual Speakon & Dual 1/4'' Jacks * Binding Post Terminals * Built In Crossover Network 500 Hz * Power Handling: 500 Watts RMS/1000 Watts Peak * Frequency Response: 20-400HZ * Sensitivity (1w/1m): 97 dB * Impedance: 8 Ohms * 35mm Speaker Stand Mount (Top) * Dimensions: 23''W x 17.8''D x 26.8''H * Weight: 70 lbs
"Uniden DCX309-2 Brand New Includes One Year Warranty, The Uniden DCX309 accessory handset w/ charger features DECT 6.0 technology for interference free communication, increased clarity, enhanced security and wider range. The handset, which is to be paired with the DECT 3090 series, is equipped with a speakerphone for hands-free communication and 100 name / number phonebook memory that helps you keep track of your most important contacts. You can personalize the banner display on each DCX309 handset, which all carry a 3-line backlit LCD for easy reading. Additional features include 1-line backlit LCD display, conferencing, intercom and visual flash ringer. DCX309 Features: New DECT 6.0 Technology - Interference Free Communication - Increased Clarity / Enhanced Security - Wider Range / Network Friendly, 1.9GHz Extra Handset / Charger - Dedicated for Cordless Phones by the FCC - 30 Battery Life Increase Over 5.8GHzCaller ID Announce Amplified Volume - Up To 30dB Increased Clarity / Enhanced Security Hearing Aid T-Coil CompatibleLCD Display on HandsetHandset SpeakerphoneBacklit Keypad50 Station Name / Number Caller ID Memory100 Station Phone Directory / DialerConferencingWireless Network FriendlyInterference FreeMessage Waiting IndicatorSelectable RingtonesIntercom / Call TransferPersonalized RingersCopy Phonebooks Between Handsets5 Number RedialMuteFlashClock DisplayTrilingual Menu Support (English / Spanish / French)"
Monoprice 4927 8 Inches In-Wall Subwoofer (Passive) The MIT-800s in-wall bridge speaker transforms your smaller 2-way in-wall or satellite speakers into full range monitors. This compact, non-powered sub is not for replacing a decent powered LFE subwoofer, but to bridge the frequency gap often found when trying to pair smaller speakers to a high powered subwoofer.While typical compact 2-way speakers do a fine job of covering the high and mid frequency audio, they tend to taper off at the upper end of the low frequencies leaving a sonic gap between the highs and lows. You can adjust the upper end of your powered subs crossover to compensate, but that ends up sacrificing sound staging and depth of field as the directional upper low end frequencies start to collapse onto the location of your sub. Pair these with each of your main speakers for clearer, more well defined audio and wider sound staging. It will be like having massive full range tower speakers without sacrificing any living space.Specifications: Impedance: 8Ohms Frequency Response: 58 Hz to 3.0 Khz. Power Handling Capacity: 80Watts Nominal / 160Watts Max. Woofer: 8? Non-press Cone Woofer Magnet Size: 30oz Sensitivity: 90 +/- 2dB (1.0M/2.0V) Crossover: 6dB per octave Cut-out Dimensions: 8 3/5? x 8 3/5? Overall Dimentions: 10? x 10? x 4"User Manual
Lanzar (HBP212)- 1200 Watt Dual 12'' Bandpass Subwoofer System Lanzar bandpass subwoofers are specially designed for maximum slam! These two woofers are mounted inside a dual-chambered box – one sealed, the other ported – with the sound waves emerging from the ported box. This yields a low, narrow frequency sound (37 Hz – 1 kHz) with a huge punch that’s super efficient. With ample room, these babies will roar. The two 1200-watt 12” subwoofers are built with a 2.5” aluminum voice coil, so the only vibrations you’ll be hearing will come from your music. The high quality MDF construction provides maximum boost, extends the life of your product, and ensures the safety of your vehicle. And this subwoofer doesn’t just sound great – it looks great, too, thanks to the Plexiglass front window and double jet-ports. Feel the bass with Lanzar’s bandpass subwoofers! * Dual Bandpass Subwoofer System * Contains Two 12'' Drivers * Impedance: 4 Ohms * Double Jet-port * High Quality MDF Construction * Plexiglass Front Window * Non-Press Paper Cone * 2.5'' Aluminum Voice Coil * Quick Connect Speaker Terminal * SPL: 107dB@1W/1M * Frequency Response: 37-1KHz * 1200 Watts Max Rated Dimensions: 14''H x 31''W x 14''D
Lanzar (MAX12)- Max 12'' 1000 Watt Small Enclosure 4 Ohm Subwoofer Lanzar’s MAX-series speakers will push your audio to the MAX! This 12” small-enclosure sub will add extra punch to your low-end and give you that huge sound you want. The sound is produced by a 2” four-layer high-temperature Kapton voice coils with two 65 oz. heavy double-stacked magnets, pushing 1000 watts MAX power. It’s all housed in a stamped steel basket for heavy-duty stability. And your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, and the bumped and vented motor construction. 4 ohm impedance. * Black Non-Pressed Paper Cone * Wide Non-Fatiguing Rubber Suspension * Stamped Steel Basket w/Golden Input Terminal * Bumped & Vented Motor Structure * Special Designed Rubber Magnet Boot * 2'' 4 Layer High Temperature Kapton Voice Coil * 65 + 65 oz. Heavy Double Stacked Magnet Structure * 1000 Watts Peak Power * 4 Ohms Nom. Impedance * SPL: 91.9 dB * Mounting Depth: 6.42'' * Overall Diameter: 12.09''
Oblanc COBRA Amplified Subwoofer 2.1 Stereo Headphones with Built-in Battery, Improved Vocals, Deeper Bass, SILVERSpecification 2.1 Amplified Stereo Channel with Independent Bass. Gold Plated 3.5mm 4-pole Connector Compatible with Smartphones, and Tablets. Extreme Comfort and Fit Leatherette Ear Cups. 2 Neodymium Drivers In Each Ear Cup:. 30mm 32? for Treble. 40mm 32? for Bass. Volume Controls: (Can be Adjusted Individually). Main Volume. Bass Volume. Tangle-free Cord with In-line Microphone and Call Control. Rechargeable 450mAh Battery (Up to 10 Hours Per Charge). Acoustic Design: Dynamic, Closed-back. Frequency Response: 20 - 20KHz. Speaker Sensitivity: 116dB SPL (1mW) @ 1KHz. Total Harmonic Distortion (THD): Package Info Dimension: L 10 x W 9 x H 4.5 inch. Weight: 1.63 lb. UPC: 810154019182.Package Includes Oblanc COBRA SILVER Subwoofer Headphone w/In-line Microphone. 3.5mm Mic/Line Audio Cable for Computers, and Laptops (42"). 47" USB Charging Cable (Type-A Male to Mini Type-B Male). Warranty Pamphlet. Oblanc Rubber Key Tag.
Oblanc COBRA Amplified Subwoofer 2.1 Stereo Headphones with Built-in Battery, Improved Vocals, Deeper Bass, BLACKSpecification 2.1 Amplified Stereo Channel with Independent Bass. Gold Plated 3.5mm 4-pole Connector Compatible with Smartphones, and Tablets. Extreme Comfort and Fit Leatherette Ear Cups. 2 Neodymium Drivers In Each Ear Cup:. 30mm 32? for Treble. 40mm 32? for Bass. Volume Controls: (Can be Adjusted Individually). Main Volume. Bass Volume. Tangle-free Cord with In-line Microphone and Call Control. Rechargeable 450mAh Battery (Up to 10 Hours Per Charge). Acoustic Design: Dynamic, Closed-back. Frequency Response: 20 - 20KHz. Speaker Sensitivity: 116dB SPL (1mW) @ 1KHz. Total Harmonic Distortion (THD): Package Info Dimension: L 10 x W 9 x H 4.5 inch. Weight: 1.63 lb. UPC: 810154019168.Package Includes Oblanc COBRA BLACK Subwoofer Headphone w/In-line Microphone. 3.5mm Mic/Line Audio Cable for Computers, and Laptops (42"). 47" USB Charging Cable (Type-A Male to Mini Type-B Male). Warranty Pamphlet. Oblanc Rubber Key Tag.
Includes 3' grounded line cord Epoxy encapsulated with a stainless steel or black powder-coated enclosure Features (12-15V) multi-tap outputs and circuit breaker protection Modular timer and photocell availableBulb: Remove 60W Medium Base Category Group: Landscape Ltg. Category Sub Group: Landscape Ltg. Accessories Certification: c-UL-us Wet Collection: TRANSFORMER Extension: 5.5" Finish: Stainless Steel Height: 18.00 Length: 6.00 Style: Commercial UL Listed: Wet Locations Voltage: 120 Weight: 20.00 Width: 6.50This 300 watt Pro-Series Transformer is supplied with a 3' grounded line cord and is epoxy encapsulated with a stainless steel enclosure. Features (12v-15v) multi-tap outputs and circuit breaker protection. A modular timer and photocell is available
Bulbrite's PS shaped bulbs are designed as the perfect long life general service replacement bulb for standard Incandescent's.Perfect for ceiling fixtures, commercial, outdoor, security, portable lamps, vanities and wall mounted fixtures Glare-free ambient lighting 300 Watts, 3600 lumens, 100 CRI, 6,000 hour average rated life, medium (E26) baseAvg Hours: 5000 Base Name: Medium Beam Spread: 360 Degrees Bulb Base: PS25 A-Shape Bulb Diameter: 3-1 8 Bulb Shape: PS25 Bulb Type: Incandescent Color Temperature: 2800 CRI: 100 Dimmable: Yes Estimated Annual Energy Cost: 36.135 Height: 7-1 4 Length: 3-1 2 Lumens: 3600 Lumens Equivalency: 300 Maximum Length: 6-8 9 Number of Bulbs in Box: 1 Shape: A-Shape Voltage: 130 Wattage: 300 Weight: 0.29 Width: 3-1 2
New Hifonics Brx12d4 900W Brutus 12" Dvc Car Subwoofer 4 Ohm 900 Watt Sub Woofer Series: BRUTUS Type: Woofer Cone Material: 12" Polypropylene Woofer RMS Power: 450W Sensitivity: 84 dB Impedance: 2 x 4 Ohm Cut-Out Dimensions: 10-15/16" Feature: 12" Dual 4 Ohm Brutus Series Subwoofer Heavy duty woven texture polypropylene cone & injection molded dust cap UV Resistant butyl rubber surround Dual resin infused textile spiders Push & insert style speaker terminals Heavy duty ABS protective motor cap Powder coated deep draw stamped steel basket ABS rim ring with blue illumination Operates in sealed and ported enclosures 2.5" High temperature voice coil 56 oz Vented motor TOP-MOUNT DEPTH: 5-9/16"
Sony Performance Line 100 Watt Powered Subwoofer - SA-W2500 Type: Subwoofer Driver Units: Woofer Size(s): 9-13/16" (25cm) Bass Driver(s): Advanced Bass Reflex Design; 8" Long-Throw Driver Power Rating: Woofer Power Handling: 100W (6 ohms, 80 Hz, 10% THD) Frequency Response: 28Hz - 200Hz Connectors: Speaker Terminal Type: Line In Line Level Input(s): 1 (Rear) Speaker Level Input(s): 1 (Rear) Power Supply: Power Requirements: 120V AC, 60Hz (Subwoofer) Power Consumption (in Operation): 70W (Subwoofer) Power Consumption (in Standby): less then 0.3W (Subwoofer) Dimensions & Weight: Weight (Approx.): 22 lbs. Dimensions (Approx.): 11.44" x 13.75" x 16.38" Parts: 1 year limited
"RCA DHA1000A Brand New Includes One Year Warranty, The RCA DHA1000A ultra high gain indoor HDTV antenna features LPDA (Logarithmic Periodic Dipole Array) technology, which produces up to 24dBi antenna gain to ensure clear VHF and UHF signals with minimal adjustments. The omnidirectional design receives signals from multiple directions to promote optimal performance and can receive free-to-air HDTV signals without adjustment. DHA1000A Features: Indoor HDTV Amplified Antenna, 75 Ohms Impedance, 24dBi Gain, Clear VHF & UHF Signals, Logarithmic Periodic Dipole Array(LPDA) Technology, Omnidirectional Design, RF Connector, Compatible w/ Most HDTVs, Easy Installation"
This amplified version of the original tube-technology Blinc Mascara applies like traditional mascara, able to be reapplied as many times as necessary. This tube-technology, water-resistant mascara provides buildable, sumptuous volume without flakes, smudges, or clumps, Waterproof, smear-proof, professional grade mascara for long, natural looking eyelashes, Tube-technology mascara designed to produce minuscule water-resistant tubes that surround the lashes for flawless amplification and hold, Can be reapplied as many times as needed, 0.3 oz.
Pioneer TS-A1376R 5.25 A-Series 300-Watt 3-Way Speakers Features: 300 Watts Max Power (50 Watts Nominal) New Multilayer Mica Matrix Cone Design for Optimum Sound Reproduction and Responsiveness Lightweight Elastic Polymer Surround New fully covered mesh grille design for all 6 x 9 models New spider design incorporates the same material used in the PRS series of high-end component speakers for stiffer suspension and more accurate response Cooling basket with air vent for increased cooling to process improved power handling Type: 5.25"
Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques Power most cabinet fixtures Intrinsically safe, Class 2 transformers permit no greater than 5A current be drawn Non-Metallic sheathed cable may be used for secondary wiring in walls and ceilings Drop down to a smaller gauge wire if space in fixture does not permit secure connection directly with the non-metallic sheathed cableFinish: Black Height: 2-5 8 Input: 120V Length: 8-1 4 Output: 12V Wattage: 300 Width: 4-5 8
Designed to fit a wide variety of interior and exterior vessel applications. These speakers can be bracket or flush mounted. They are a perfect complement to any fixed mount VHF. The MLS-310 features a built-in 10W amplifier with a volume control and on/off switch. It is ideal for applications where increased volume and clarity are necessary. The MLS-300 is a non-amplified speaker. It requires less mounting depth than the MLS-310 and is designed to replace Standard Horizon 201S speakers.
Pyle 8" 300 Watt 2-Way White Wake Board Marine Speaker Features: Excellent For Monitor or Surround Sound Applications Heavy Duty Plastic Cabinet Gold Plated Plug Terminals 1.75" Mounting Bracket Included Type: Marine Speaker Driver Design: 2-way Speaker Speaker Size: 8" Peak Power: 300 Watts Components: 8" Poly Mica Woofer Cone Butyl Rubber Surround 30 oz. Magnet Structure 1" Polymer Dome Tweeter Frequency Response: 60 Hz - 20 kHz Impedance: 4 Ohm
Pyle PSBV200BT 300 Watt Bluetooth Soundbar with USB/SD/FM Radio and Wireless Remote Type: Soundbar Connectors: Aux1, Aux2, PC/MP3 Audio Inputs Remote Control: YES Power Rating: Power Output: 300 Watts Peak / 150 Watts RMS Nominal Impedance: Woofer Impedance: 8 Ohm Power Supply: DC 18V/2.5A Dimensions & Weight: Unit Dimensions: H: 4.7" x W: 9.8" x L: 23.8" Unit Weight: 11.7 lbs. Parts: 1 YEAR WARRANTY
Use enclosed transformers for all initial installations to ensure safe and primary side connections in a wiring compartment Dimming with electronic low voltage dimmers is recommended 100W minimum, 300W maximum Includes automatic reset, soft starting and short circuit protectionFinish: Black Height: 2-1 2 Input: 120v Length: 6-1 2 Output: 24v 300w Transformer Type: Electronic Width: 3-3 8
Bogen Communications ASUG1 8" Self-Amplified 1 Watt Ceiling Speaker Features: Self-amplified 1W, 24V DC transformer Installs onto ceiling tile Intelligible audio reproduction Durable construction Type: 1-way Speaker Surround Material: Steel RMS Power: 1 W Frequency Response: Minimum Frequency Response 100 Hz - Maximum Frequency Response 10 kHz Impedance: 2 Kilo Ohm
Black Poly Strapping - 1/2" 300# 8 X 8 is a good economy-grade that provides secure protection for your products. Use this strapping with plastic buckles, wire buckles or metal seals. Pull tight with hand. - Black Polyethylene Strapping 1/2" 300# 8 X 8 - Strapping and Accessories by Paper Mart - Thickness: 0.017 - Breakstrength: 300 Lbs. Found at www.papermart.com.
- This 300 watt Pro-Series Transformer is supplied with a 3 foot grounded line cord and is epoxy encapsulated with a stainless steel enclosure. Features (12v-15v) multi-tap outputs and circuit breaker protection. A modular timer and photocell is available. - All Pro-Series Transformers use a high capacity terminal block and feature a magnetic secondary reset.
BIC America V-80 8" Powered Subwoofer Part Number: V-80 Type: Subwoofer Speakers Configuration: Down-Firing, long-throw 8" subwoofer; tuned vent Driver Units: 8" Woofer Power Rating: Built in Amplifier Power: 100 Watts Frequency Response: 37- 180 Hz variable (adjustable crossover) Nominal Impedance: 8 Ohms Dimensions & Weight: 12.94"H x 11.25" W x 11.25" D
15-inch woofer driven by a 165-watt RMS (370-watt peak) Class D amplifier, Tweeter driven by a 35-watt RMS (80-watt peak) Class D amplifier, 50Hz ~ 20kHz frequency response, Peak sound pressure level of 125dB @ 1m, sustained SPL of 98dB @ 1m, Includes both balanced and unbalanced mic and line inputs, as well as both balanced and unbalanced line outputs
TIC GS-50 8" 250-Watt Omni-Directional Outdoor Subwoofer Single Type: Outdoor Speaker Driver Units: Woofer: 8" injection molded PP cone, Butyl rubber surround Power Rating: 125W RMS / 250W Peak Frequency Response: 25Hz â€“ 110Hz (crossover at 100Hz) Nominal Impedance: 8 ohm Sensitivity: 86db Â±3db @ 1W/1m Dimensions & Weight: 12.7"x12.7"x13.5" / 9 lbs.
The Chefman 300 watt hand blender, food chopper and whisk features a quite and more powerful motor! This can handle more blending tasks, and the new and improved ice crushing cross blade and makes it a breeze! The stick design allows you to reach into pots, pitchers, and bowls to extend your blending options! Dishwasher safe. Model RJ19-V2-BP-RED.
Aquatop 003403 Submersible Glass Aquarium Heater - 300 Watt Fully submersible glass heater offers simple and easy installation with use of suction cups.Maintain constant and stable temperatures for your aquatic creatures.Can handle aquariums up to 75 gallons.Easy to set and adjust.Made from high quality insulated glass.300-watt. 300 Watt
PYLE 8" 600W Dual Voice Coil Car Subwoofer Series: Blue Wave Type: Subwoofers Cone Material: Blue Injection Molded Cone Surround Material: Non-Fatiguing Big Rubber Suspension Voice Coil: Dual Voice Coil Construction: 1.5" High Temperature Dual Kapton Voice Coil Damper (Spider): Flat Progressive Spider Magnet Construction: 60 oz. Magnet
Polk Audio 8" 400 Watt Single Voice Coil White Marine Subwoofer Type: Marine Subwoofer Speaker Size: N/A Subwoofer Size: 8" Voice Coil: Single Peak Power: 400 Watts Components: 8" High Quality Polypropylene Cone 40 oz. Magnet Structure 1.5" High Temperature Voice Coil Frequency Response: 35 Hz - 3.5 kHz Sensitivity: 91 dB
New Boss Cx122 1400 Watt 12 Subwoofer Car Audio 12 Inch Car Subwoofer Sub Type: Subwoofers Cone Material: Custom Tooled High Efficiency Injection Custom Tooled PP Cone Surround Material: Rubber Voice Coil: Single RMS Power: RMS Power: 700 Watts @ 4 Ohms Frequency Response: 25 Hz - 3000 Hz Sensitivity: 94 dB Impedance: 4 Ohm
PYLE 10" 1000W Car Subwoofer Series: Blue Wave Type: Subwoofers Cone Material: Blue Injection Molded Cone Surround Material: Non-Fatiguing Big Rubber Suspension Voice Coil: Dual Voice Coil Construction: 2" High Temperature Dual Kapton Voice Coil Damper (Spider): Flat Progressive Spider Magnet Construction: 2 x 70 oz. Magnet
Pyramid 8" 400W Car Subwoofer Type: Subwoofers Cone Material: Injection-Molded P.P. Cone Surround Material: Specially Treated Black Rubber Edge Suspension Voice Coil Construction: 1.5" High Temperature Kapton Voice Coil Magnet Construction: 60 oz. Frame Construction: Chrome Finish Basket RMS Power: 200W Sensitivity: 89 dB
Alpine 300 Watt Transformer With Timer and Photo Cell - PL108T Product Features Alpine offers a wide selection of transformers with photo cells and timers. Perfect to use with any underwater or above water lighting that requires a transformer.Dimensions- 9"L x 5"W x 5"HWeight- 14 lbsPlastic* UPC Number: 821559004147
PYLE Single 10" 500W Amplified Subwoofer Tube Series: Blue Wave Type: Amplified Subwoofers Cone Material: Blue Polypropylene Cone Surround Material: Specially Treated Black Rubber Edge Suspension Voice Coil: Single Voice Coil Construction: 1.5" Aluminum Voice Coil RMS Power: 250W Frequency Response: 35 Hz - 80 Hz
Clarity C200 1-line Operation Amplified Trimline Phone Body Color: White Additional Features: Clarity Power technology Amplifies incoming sounds up to 26 decibels Bright visual ring indicator Loud ringer volume Large, backlit keypad Hearing Aid Compatible Placing / Mounting: Table-top; Wall-mountable
BLACKMORE BJP-15BT Amplified Speaker Type: PA Speakers Accessory Type: Microphone: 2 pcs Remote control: 1 pc Specification: Woofer:15" Woofer, 40oz, 50mm Vc Driver Unit: 34mm Ti.Diap Driver, 13.5oz Frequency Response: 55 Hz - 20 KHz Sensitivity: 94 + / - 2dB Power Supply: 2250W
PYLE 12" 1200W 1200 Watt Ultra Slim DVC Subwoofer Series: Chopper Series Type: Subwoofers Cone Material: Poly Mica Surround Material: Butyl Foam Voice Coil: Dual Voice Coil Construction: 2.5" High Temperature Kapton Voice Coil Magnet Construction: 75 oz. Magnet RMS Power: 600W
Bazooka Single 8" 400W Enclosed Subwoofer Series: BT Series Type: Enclosed Subwoofers Voice Coil: Dual Voice Coil Construction: 2" high power/high temperature Magnet Construction: 36 oz. Magnet Weight RMS Power: 200W Frequency Response: 39 Hz - 1500 Hz Sensitivity: 102 dB
Bazooka Single 6" 100W Amplified Subwoofer Series: BT Series Type: Subwoofers Voice Coil: Dual Voice Coil Construction: 1.5" high power/high temperature Magnet Construction: 28 oz. Magnet Weight Frequency Response: 39 Hz - 85 Hz Impedance: 2 Ohm Crossover Point: 85 Hz
PYLE 12" 800W 800 Watt Amplified Subwoofer Tube Series: Blue Wave Type: Amplified Subwoofers Cone Material: Polypropylene Surround Material: Rubber Voice Coil: Single Voice Coil Construction: 2" Aluminum Voice Coil Impedance: 4 Ohm Dimensions: 15.4"H x 22.8"W x 13.8"D
Infinity REF860W 8" 1000W Car Audio Subwoofer Series: Reference Type: Subwoofers Cone Material: Polypropylene Surround Material: Rubber Voice Coil: Single Magnet Construction: Rubber Magnet Boot RMS Power: 250W Frequency Response: 30-400Hz
Combination switch incorporates the control of a ceiling light/fan into the space of one wall mounted switch. Now you can change the fan speed and adjust light level with one control - eliminating inconvenient pull chains.
Boss PHANTOM P156DVC Woofer Series: PHANTOM Type: Subwoofers RMS Power: 1500W Frequency Response: Minimum Frequency Response 25 Hz - Maximum Frequency Response 1 kHz Sensitivity: 96 dB Impedance: 2 or 8 Ohm Parts: 1 Year
POWER ACOUSTIK BAMF-122 BAMF Series Dual 2ohm Subwoofer (12"; 3,500 Watt) Type: See Details Cone Material: 12" Spruce Pulp Woofer RMS Power: BAMF-122 Sensitivity: 81 dB Impedance: 2 Ohm Feature: Peak Power: 3500
Combination switch allows control of a ceiling light/fan into the space of one wall mounted switch. The switch also has an IR sensor that allows you to use the included remote control to adjust your settings.
Perfect for use with pool/spa lights and outdoor garden or fountain lighting, this safety transformer is designed to operate in harsh environments and can easily be installed when the cover is removed.
Textured Architectural Bronze finishBulb Included: No Collection: Plus Series Finish: Textured Architectural Bronze Height: 6" Length: 18.95" Type: Transformer Voltage: 12V Width: 5.33"