Vidgrids » bowl jaw

bowl jaw

Edison Ojm826 Open Jaw Digital Multimeter

Edison Ojm826 Open Jaw Digital Multimeter

103.73 GBP

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures current DC voltage, AC voltage, resistance, capacitance, frequency, other features include, relative measurement, data hold, diode test, continuity test and duty cycle test function. Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement up to 600V Cat III installations (and 1000V Cat II)DISPLAY: 3999 Counts.DCV: 4/40/400V /- 0.7% 1000V /- 0.8%ACV: 4/40/400V /- 0.8% 700V /- 1.0%ACA: 200A /- 3.0% (50Hz to 1000Hz)Ohm: 400/4k/40k/4M Ohm/- 1.2% 40M Ohm/-2.0%CAP: 40n/400n/4 mu /40 mu F /- 4.0%FREQUENCY: 10Hz to 100Khz /- 2.0%DUTY CYCLE: 0.1% to 99.9%BACKLIGHT AUTO OFF TIME LIMIT MODE

"Kennedy Industrial 3"" 2-Jaw Double Ended Mechanical Puller"

"Kennedy Industrial 3"" 2-Jaw Double Ended Mechanical Puller"

9.16 GBP

Industrial Reversible/Double-Ended AdjustableUsed for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75mm, 100mm, 150mm and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external applications. Selection: Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed - this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed.All pullers can be assembled for internal or external use.2 Jaw Pullers - Supplied with both 2-legged yoke2 Jaw -Internal Assembly2 Jaw -External Assembly

TEKTON 8 in. 3-Jaw Gear Puller - 5692

TEKTON 8 in. 3-Jaw Gear Puller - 5692

35.29 USD

TEKTON 8 in. 3-Jaw Gear Puller - 5692Smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft with the versatile TEKTON 5692 8 in. 3-Jaw Gear Puller. Its universal design can grip eight different ways: around outside edge or through inside openings while set in short, standard, long or extra long reach positions. Three jaws evenly distribute powerful pulling forces, protecting edges of gear from bending or chipping damage. Turn drive screw with any style hand wrench or ratchet and the precise, cold-rolled acme threads glide along smoothly without binding or chattering, even under high stress.Capacities: Jaw Spread: 10-1/2 in.Jaw Reach: 6-1/4 in.

Worx-WG308-Jaw Saw With Pole

Worx-WG308-Jaw Saw With Pole

209.39 USD

Bar measures 6 inches; 4-inch maximum cutting length; weighs 11.7 pounds This model(WG308 ) consists of a jawsaw (model#WG307) and an extension pole (model#WA0163) . Electric pruner/chainsaw with extension handle for cutting extra-tall branches 5 amp saw is powered entirely by electricity with no gas oil or noxious emissions.Enclosed jaw guard around chain keeps cuts focused and fingers safe. Cuts limbs up to 12 feet high; easy-to-use single-bolt Auto-Tension system

Big Jaw Pooper Scooper

Big Jaw Pooper Scooper

9.98 USD

Take the pain out of bending down to pick up after your dog with this Big Jaw Pooper Scooper. The lightweight scooper is 2 feet long and has a convenient spring handle for one-handed operation. It picks up dog waste from grass, gravel or cement, and can be easily washed. Has a hole in the handle for hanging. 5-1/4"W x 5"D x 24"H. Plastic and metal. Keeps hands clean and masks odors No more bending down Details: 5-1/4"W x 5"D x 24"H Plastic and metal.

Dyer Island Aged Bone Cretaceous Shark Jaw

Dyer Island Aged Bone Cretaceous Shark Jaw

304.0 USD

- Freshly dredged from a tributary near the Western Cape of South Africa (not really), our Dyer Island Collection Great White Jaws are ready to scare the pants off of any house guest or client. As an uncanny likeness of one of the world?s most iconic set of choppers, the Dyer Island?s cleverly molded mandibles and fearsome serrated teeth make it perfect for or an eclectic great room, schoolroom, or wit-starved office. - Product Materials: Composite

Kennedy Industrial Multi-Angle Soft Jaw Vice

Kennedy Industrial Multi-Angle Soft Jaw Vice

24.98 GBP

Aluminium vice with a two position lockable ball joint, cast steel clamp and swivel mechanism. Horizontal/vertical grooved jaw is designed to hold irregular shaped objects. Removable jaw rubber covers for protecting delicate components. Will clamp to surfaces of five to 50mm thickness.Jaw width: 74mm.Upright: Rotates through 360° and the vice can swivel between 45° and 135°.Right angles: Vice can be rotated through 360°.

Professional Cobalt Stainless Cuticle Nipper - Full Jaw

Professional Cobalt Stainless Cuticle Nipper - Full Jaw

54.99 USD

Women's . Boasts ultra-sharp hand-finished tips & smooth double spring action Provides exceptional precision & performance Withstands repeated sterilization without rusting or corroding Made of stainless steel With a lap joint To use: Clean thoroughly after use. Keep nipper joints clean & freshly oiled to prevent formation of rust from oxidation. If rust appears clean joint add more oil & wipe off excess

FabLife 50-1117 Deluxe Jaw/Trigger folding reaching aid, pistol grip, open-jaw, 32

FabLife 50-1117 Deluxe Jaw/Trigger folding reaching aid, pistol grip, open-jaw, 32

23.59 USD

Deluxe jaw and trigger reaching aides fold for convenient storage and transportation. The reacher assists individuals with limited reach and hand strength. Units have magnetic tip to help retrieve objects. Drag lug helps position product for easy pick-up. Open jaw closes when trigger is squeezed. Deluxe Jaw/Trigger folding pistol grip, open-jaw, 32" Dimension: 32" Length X 5" Width X 0.5" Height

Kennedy Industrial Long Jaw Mechanical Puller

Kennedy Industrial Long Jaw Mechanical Puller

34.98 GBP

Manufactured from drop forged hardened alloy steel. 3 position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the t-bar to extend the thrust bolt on to fixed shaft.Spread: 10 - 50mmReach: 300mm

Tweezerman Rockhard Stainless Cuticle Nipper - 1/2 Jaw -

Tweezerman Rockhard Stainless Cuticle Nipper - 1/2 Jaw -

25.0 USD

Blades meet & cut at the very tip Sharp cutting edge ensures complete cut Double spring for smooth action & no breaking Made of quality Rochard stainless steel for durability Keep a little oil in joint for lubrication Wipe clean after use To use: Push back cuticle & trim dead skin around nail. Also cut hangnail. Not suitable for acrylic nails

FabLife 50-1112 Deluxe Jaw/Trigger reaching aid, pistol grip, open jaw, 32

FabLife 50-1112 Deluxe Jaw/Trigger reaching aid, pistol grip, open jaw, 32

20.11 USD

Deluxe jaw and trigger reaching aides assist individuals with limited reach and hand strength. Units have magnetic tip to help retrieve objects. Drag lug helps position product for easy pick-up. Open jaw closes when trigger is squeezed. Deluxe Jaw/Trigger pistol grip, open jaw, 32" Dimension: 32" Length X 5" Width X 0.5" Height

Nylon Jaw Pliers pliers

Nylon Jaw Pliers pliers

11.58 USD

Nylon Jaw Pliers are designed for shaping and sculpting wire and for wire wrapping. Nylon jaws protect surface finish of wire or other materials handled with pliers. No more rebuffing or refinishing surfaces after forming. Made of polished stainless steel with box-joint construction for extra leverage. Measures 5 in. long.

Kennedy Industrial Breast Drill 13Mm 3-Jaw Chuck

Kennedy Industrial Breast Drill 13Mm 3-Jaw Chuck

40.79 GBP

Heavy duty two speed breast drill with a heavy cast construction and enclosed gearing. Fitted with a three jaw keyless 13mm chuck and supplied with two removable wooden handles. The plate is pressed against the chest to force the drill point into the work.

Indexa Cc11 133X60Mm Serrated Free Vice Jaw

Indexa Cc11 133X60Mm Serrated Free Vice Jaw

296.57 GBP

CC11 - Free Vice JawClamping force in two directions, with serrated jaws for holding large or irregular shapes.Material: Body: Grey Cast Iron.Material: Jaw: Medium Carbon Steel EN8D.Hardness: Jaw Only: HRC 45 - 48.Surface Finish: Jaw: Black Oxide.

Kennedy Professional Glow Plug Connector Pliers Angled Jaw

Kennedy Professional Glow Plug Connector Pliers Angled Jaw

14.39 GBP

Suitable for the removal of hard to reach glow plug connectors found on the latest generation of engines. Made from chrome vanadium steel. Composite handle provides added comfort and control. Blade length: 125mm.

Kennedy Industrial 27Mm Open Jaw Slogging Wrench

Kennedy Industrial 27Mm Open Jaw Slogging Wrench

22.63 GBP

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

"Visegrip 10508019 5Cr 5""/125Mm Curved Jaw Locking Plier"

"Visegrip 10508019 5Cr 5""/125Mm Curved Jaw Locking Plier"

13.79 GBP

Self-energising lower jaw provides three times more gripping power, with no slipping or stripping on any style nut or bolt head. Unique curved jaw CR. Hex key adjusting screw. Guarded release.

Irwin Tools                              10" Straight Jaw Locking Plier

Irwin Tools 10" Straight Jaw Locking Plier

9.91 EUR

Irwin Tools 10" Straight Jaw Locking Plier Brand: Irwin Vise Grip Type: Pliers Features: * Straight jaws provide maximum contact on flat, s Selling Unit: Card

Kennedy Industrial 30Mm Rounded Jaw Hose Clamp

Kennedy Industrial 30Mm Rounded Jaw Hose Clamp

14.7 GBP

Long rounded jaws with smooth section. For pinching off hoses without serration and gripping small sections of pipes. Invaluable aid for brake repairs on cars.

"Kennedy Industrial 180Mm/7"" Curved Jaw Gripwrench"

"Kennedy Industrial 180Mm/7"" Curved Jaw Gripwrench"

7.02 GBP

Kennedy curved jaw grip wrenches are specifically designed to hold and grip circular objects. Ideal for plumbing and general pipe work.

"Visegrip T0902El4 5Wr 5"" Curved Jaw Tool With Wire Cutter"

"Visegrip T0902El4 5Wr 5"" Curved Jaw Tool With Wire Cutter"

13.4 GBP

Provides a better grip on round items such as pipe. Can be used as a non-slip pipe wrench or as an all-purpose clamp.

Jaw Breaker Combo Cable Lock

Jaw Breaker Combo Cable Lock

24.99 USD

The Serfas Jaw Breaker Combo Cable Lock features flexible light weight and self coiling for easy transporting.

"Irwin Record T3D 4"" Jaw Plates/Screwsforno.3 Vice (Pr)"

"Irwin Record T3D 4"" Jaw Plates/Screwsforno.3 Vice (Pr)"

21.36 GBP

"Irwin Record Irwin Record T3D 4"" Jaw Plates/Screwsforno.3 Vice (Pr) Hand Tools > Vices > Vice Jaws & Grips"

Rubber Faced Vise Jaw Pads

Rubber Faced Vise Jaw Pads

21.95 USD

For Protecting Delicate Parts. Rubber jaw pads protect delicate parts from damage. Also works great...

Kennedy Industrial Open Barrel Jaw Crimpingtool

Kennedy Industrial Open Barrel Jaw Crimpingtool

13.7 GBP

jaw capacities:Open Barrel Terminal:0.5-1.0mm2 (AWG 20-18)1.5-2.5mm2 (AWG 16-14)4.0-6.0mm2 (AWG 12-10)

OTC 2-Ton-2/3-Jaw Puller

OTC 2-Ton-2/3-Jaw Puller

60.95 USD

Specifications Maximum Reach 3-1/4 Maximum Spread 4-3/4 Weight 1 lb. 5 oz. Reversible jaws

OTC 5-Ton-2/3-Jaw Puller

OTC 5-Ton-2/3-Jaw Puller

69.95 USD

Specifications Maximum Reach 3-1/4 Maximum Spread 7 Weight 2 lbs. 12 oz. Reversible Jaws

07650-00302, AVDEL TOOL PART, TAIL JAW PISTON (1 PK)

07650-00302, AVDEL TOOL PART, TAIL JAW PISTON (1 PK)

1416.51 INR

07650-00302, AVDEL TOOL PART, TAIL JAW PISTON (1 PK) Brand: AVDEL TOOL PART Type: Other

DPN901-019, POP TOOL PART, JAW PUSHER SPRING (1 PK)

DPN901-019, POP TOOL PART, JAW PUSHER SPRING (1 PK)

344.3 INR

DPN901-019, POP TOOL PART, JAW PUSHER SPRING (1 PK) Brand: POP TOOL PART Type: Other

07498-04502, AVDEL TOOL PART, JAW SPREADER (1 PK)

07498-04502, AVDEL TOOL PART, JAW SPREADER (1 PK)

2344.79 INR

07498-04502, AVDEL TOOL PART, JAW SPREADER (1 PK) Brand: AVDEL TOOL PART Type: Other

PRG510-123, POP TOOL PART, JAW PUSHER SPRING (1 PK)

PRG510-123, POP TOOL PART, JAW PUSHER SPRING (1 PK)

316.21 INR

PRG510-123, POP TOOL PART, JAW PUSHER SPRING (1 PK) Brand: POP TOOL PART Type: Other

Indexa 003275 160Mm 3-Jaw C/I Chuck Front Mount

Indexa 003275 160Mm 3-Jaw C/I Chuck Front Mount

387.08 GBP

Front mounting, reversible jaws. DIN 6350 (form A).Plain back with adaptor recess.

07612-02003, AVDEL TOOL PART, JAW HOUSING (1 PK)

07612-02003, AVDEL TOOL PART, JAW HOUSING (1 PK)

99.3 AUD

07612-02003, AVDEL TOOL PART, JAW HOUSING (1 PK) Brand: AVDEL TOOL PART Type: Other

Indexa 100Mm Toolmakers Vice Plain Jaw

Indexa 100Mm Toolmakers Vice Plain Jaw

261.0 GBP

With a dowel pin quick release mechanism with linear scale for accurate alignment.

202303, ZIPP TOOL PART, JAW [FOR BLIND RIVET] (1 PK)

202303, ZIPP TOOL PART, JAW [FOR BLIND RIVET] (1 PK)

1.15 EUR

202303, ZIPP TOOL PART, JAW [FOR BLIND RIVET] (1 PK) Brand: ZIPP PART Type: Other

DPN276-006, POP TOOL PART, JAW PUSHER (1 PK)

DPN276-006, POP TOOL PART, JAW PUSHER (1 PK)

891.07 INR

DPN276-006, POP TOOL PART, JAW PUSHER (1 PK) Brand: POP TOOL PART Type: Other

10280, LOBSTER TOOL PART, JAW CASE HD (1 PK)

10280, LOBSTER TOOL PART, JAW CASE HD (1 PK)

62.75 AUD

10280, LOBSTER TOOL PART, JAW CASE HD (1 PK) Brand: LOBSTER PART Type: Other

Indexa 003204 315Mm 3-Jaw C/I Chuck Rear Mount

Indexa 003204 315Mm 3-Jaw C/I Chuck Rear Mount

686.02 GBP

Rear mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

OTC 1-Ton-2-Jaw Puller

OTC 1-Ton-2-Jaw Puller

51.95 USD

Specifications Maximum Reach 2-1/8 Maximum Spread 3-1/4 Weight 5 oz.

PRP30, POP, JAW PUSHER, , PACK OF 1

PRP30, POP, JAW PUSHER, , PACK OF 1

37.54 SGD

PRP30, POP, JAW PUSHER, , PACK OF 1 Brand: POP TOOL PART Type: Other

OTC 1-Ton-3-Jaw Puller

OTC 1-Ton-3-Jaw Puller

62.95 USD

Specifications Maximum Reach 2-1/8 Maximum Spread 3-1/4 Weight 8 oz

Indexa 004304 500Mm 4-Jaw Plainback Lathe Chuck

Indexa 004304 500Mm 4-Jaw Plainback Lathe Chuck

1165.21 GBP

Plain back with adaptor recess. Front mounted. DIN 6351.

Kennedy Industrial 8 Position 8 Connector Jaw For Ken5155710K & 40K

Kennedy Industrial 8 Position 8 Connector Jaw For Ken5155710K & 40K

15.37 GBP

Jaw capacities:8 Position 8 Connector:8P8C/RJ45 Plugs

"Kennedy Industrial 8"" Phosphate Jaw And Knurl Kit"

"Kennedy Industrial 8"" Phosphate Jaw And Knurl Kit"

8.27 GBP

Consisting of replacement jaw, knurl and pin.

Anatomical Classic Skull w/ Opened Lower Jaw

Anatomical Classic Skull w/ Opened Lower Jaw

151.1 EUR

Anatomical Classic Skull w/ Opened Lower Jaw

"Kennedy Industrial 8""/200Mm Wide Jaw Adjustable Wrench"

"Kennedy Industrial 8""/200Mm Wide Jaw Adjustable Wrench"

13.99 GBP

Available in a range of jaw capacities.

Indexa 50X78X30Mm Hi-Prec Groove Jaw Vice 0.003Mm Acc.

Indexa 50X78X30Mm Hi-Prec Groove Jaw Vice 0.003Mm Acc.

233.1 GBP

With a rack quick release mechanism.

"Kennedy Industrial 10""/250Mm Wide Jaw Adjustable Wrench"

"Kennedy Industrial 10""/250Mm Wide Jaw Adjustable Wrench"

20.99 GBP

Jaw Capacity: 0-50mm M2-M33

"Kennedy Industrial 6""/150Mm Wide Jaw Adjustable Wrench"

"Kennedy Industrial 6""/150Mm Wide Jaw Adjustable Wrench"

12.96 GBP

Jaw Capacity: 0-34mm M2-M22