Vidgrids » camcorder monitor mount

camcorder monitor mount

Dual LCD monitor desk mount heavy duty fully adjustable fits two screens up to 27"- PrimeCables

Dual LCD monitor desk mount heavy duty fully adjustable fits two screens up to 27"- PrimeCables

52.99 USD

Dual LCD monitor desk mount heavy duty fully adjustable fits two screens up to 27"- PrimeCables® Compatible Devices Dual LCD monitor desk mount stand VESA Standard:100x100;75x75 360° rotation, 180° swivel and ±45° tilting for any viewing perspective Freely adjusting height for an optimal ergonomic position Cable clips keep cables organized and protected Both grommet and desk clamp mounting available The Cab-LDT07-C024 allows you to clear out your desk surface, while providing an ergonomic working position. It is designed to use with 13''-27'' monitors. The weight capability is 8kg/17.6Ibs for each arm. Full motion structure allows maximum flexibility — extends, tilt and swivel your monitor up to 90° left and right for easy viewing. Its ball-joint structure allows smooth, effortless rotating and positioning for any direction, making it easy to reduce glare and find the perfect viewing angle. You can also adjust the monitor vertically to a desired position. Besides, cable clip is included for organizing cables. Designed With the Every Day User in Mind - Internal cable management system to keep cords organized. - Clip on tool holder for keeping essential tools close by. - 10 fluid adjustable joints for optimal monitor placement.VESA Compliant - This plate uses 75 x 75 millimeter and 100 x 100 millimeter mounting holes to fit most 27 inch monitors and smaller on the market. This so-called "Star" VESA plate is our most commonly used VESA adaptor. It accommodates most small to mid-size monitors with 75 x 75 mm and 100 x 100 mm VESA hole patterns. The adaptor fits to a tilter mechanism utilizing the 1.9 x 1.9 inch inside holes. The device measures 4.5 x 4.5 inches in size. For monitors with recessed VESA hole patterns an additional VESA Spacer hardware kit may be needed. - Entire plate rotates 360 degrees allowing for landscape and portrait screen positions. Rock Solid Base - Our dual mount uses a heavy duty C-Clamp base that easily supports TWO  LCD monitors weighing 8KG/18LB each. - C-Clamp has a 5 inch opening to fit a variety of unique desk systems. - Grommet mounting option is included with stand. Manual link : Cab-LDT07-C024 Manual ATTENTION: The horizontal bar could be adjusted height freely on the tube of 450mm long. The detailed adjustable height is depending on the height of the TV installed on, which will touch the desk when adjusted lower. So different TV size, different adjustable height.

Monoprice 7562 Lcd Led 22 Inch Monitor Adjustable Desk Mount

Monoprice 7562 Lcd Led 22 Inch Monitor Adjustable Desk Mount

57.47 USD

Monoprice 7562 High Quality Adjustable Tilting Desk Mount Bracket for LCD LED, 15~22inch - Black Free space on your desk and gain improved ergonomics by using this Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.The mount attaches to the edge of a desk, table, or other horizontal surface with a maximum thickness of about 3.5". It includes a soft rubber pad to protect the finish of your mounting surface. Alternatively, it can be fixed to a grommet screwed into the top of the mounting surface.It features a jointed 22.8" extension arm, which allows you to position your monitor at exactly the right height, angle, and distance. The monitor can be tilted and rotated, allowing for easy conversion between landscape and portrait mode. It fits monitors up to 17.6 lbs weight with either a 75x75 or 100x100 VESA mounting pattern.Features: Fits monitors with VESA 75x75 and 100x100 mounting patterns Tilts +/- 15 degrees Rotates 360 degrees allowing for easy portrait or landscape orientation Jointed 22.8" extension arm Height adjustable to about 11.8" Clamps to surfaces up to 3.5" thick Alternate grommet mounting option Includes cable management clips SpecificationsDetails Model #7562 TypeDesk Mount Minimum VESA75 x 75 Maximum VESA100 x 100 Maximum Weight17.5 lbs Minimum Display Size15" Maximum Display Size22" Minimum ExtensionN/A Maximum Extension22.8" Maximum Height11.8" Tilt Range?15 degrees Swivel Range?90 degrees Rotation Range360 degrees ConstructionSteel ColorBlack and Chrome Wall Plate DimensionsN/A Front Plate Dimensions Built In LevelNo Cable ManagementYes UL CertifiedNo RoHS CompliantYesUser Manual

Canon XC10 4K Camcorder

Canon XC10 4K Camcorder

2048.11 GBP

Stunning 4K/Full HD 4:2:2 video and 12MP stills in one palm sized camera. Creative and versatile the XC10 captures stunning 4K/Full HD 4:2:2 video and high quality stills in one compact, lightweight and easy to use camera with 10x zoom lens, optical image stabilisation and Wi Fi remote control. The Canon XC10 4K Camcorder features a compact, lightweight and versatile design for convenient 4K/Full HD video shooting and 12 Megapixel digital still photography. This all-in-one ergonomically convenient camcorder can satisfy a broad range of video and still production needs. The XC10 4K Camcorder is for everyone from next-generation advanced amateurs to professional 4K and HD videographers, from digital filmmakers needing a cost-effective 4K/HD "B" or "C" camera to multimedia journalists and news agencies seeking a 4K video camera. The XC10 4K Camcorder also appeals to the needs of cross media professionals in that it can also capture 12 Megapixel still images and provide 8 Megapixel stills extracted from 4K motion video. The XC10 Camcorder's 4K imaging system is purpose-built of proprietary components, including a Genuine Canon 10x Wide-Angle Zoom Lens with 2x Digital Teleconverter and Optical Image Stabilization. Employing a special Canon compact optical system, the lens offers a zoom ratio of 27.3-273mm for movies and 24.1-241mm for photos. The XC10 4K Camcorder also features a specially designed Canon 12 Megapixel one-inch CMOS sensor that can deliver 12 stops of exposure latitude. And the new DIGIC DV5 signal processor that provides the image-processing power and speed to deliver high image quality, performance and innovative new features like the Canon XF-AVC codec for 4K and HD recording.

Monoprice 5561 Tilting Dual 10-23 Inch Monitor Desk Mount

Monoprice 5561 Tilting Dual 10-23 Inch Monitor Desk Mount

43.13 USD

Monoprice 5561 Adjustable Tilting DUAL Desk Mount Bracket for LCD LED, 10~23inch - Black Free space on your desk and gain improved ergonomics by using this Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.The mount attaches to the edge of a desk, table, or other horizontal surface with a wide V shaped base, which provides maximum stability. Two monitors can be attached to the mount, one above the other. The monitors can be tilted and rotated, allowing for easy conversion between landscape and portrait mode. It fits two monitors weighing up to 33 lbs with either 75x75 or 100x100 VESA mounting pattern.Features: Fits monitors with VESA 75x75 and 100x100 mounting patterns Tilts +/- 30 degrees Rotates 360 degrees allowing for easy portrait or landscape orientation Steel construction with aluminum VESA plate Height adjustable to about 25.2" Specifications Details Model # 5561 Type Desk Mount Minimum VESA 75 x 75 Maximum VESA 100 x 100 Maximum Weight 33 lbs/display Minimum Display Size 10" Maximum Display Size 23" Minimum Extension N/A Maximum Extension 14.2" Maximum Height 17.7" Tilt Range ?30 degrees Swivel Range ?90 degrees Rotation Range 360 degrees Construction Steel and Aluminum Color Black Wall Plate Dimensions N/A Front Plate Dimensions 4.5" x 4.5" Built In Level No Cable Management Yes UL Certified No RoHS Compliant YesUser Manual

Monoprice 6421 Adjustable Height And Swivel 23In Monitor Desk Mount

Monoprice 6421 Adjustable Height And Swivel 23In Monitor Desk Mount

37.79 USD

Monoprice 6421 Adjustable Tilting Desk Mount - Black Free space on your desk and gain improved ergonomics by using this Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.The mount attaches to the edge of a desk, table, or other horizontal surface. The mount has two 6.3" extension arms, which allows you to position your monitor at exactly the right height, angle, and distance. The monitor can be tilted and rotated, allowing for easy conversion between landscape and portrait mode on the monitor. It fits monitors up to 33 lbs weight with either 75x75 or 100x100 VESA mounting pattern.Features: Fits monitors with VESA 75x75 and 100x100 mounting patterns Tilts +/- 15 degrees Two 6.3" extension arms Rotates 360 degrees allowing for easy portrait or landscape orientation Steel construction with aluminum arm and VESA plate Height adjustable to about 16" SpecificationsDetails Model #6421 TypeDesk Mount Minimum VESA75 x 75 Maximum VESA100 x 100 Maximum Weight33 lbs Minimum Display Size10" Maximum Display Size23" Minimum ExtensionN/A Maximum Extension12.6" Maximum Height16.0" Tilt Range?15 degrees Swivel Range?90 degrees Rotation Range360 degrees ConstructionSteel and Aluminum ColorBlack and Chrome Wall Plate DimensionsN/A Front Plate Dimensions4.7" x 4.7" Built In LevelNo Cable ManagementYes UL CertifiedNo RoHS CompliantYesUser Manual

Monoprice 5559 Four 23 Inch Monitor Desk Mount Bracket

Monoprice 5559 Four 23 Inch Monitor Desk Mount Bracket

96.29 USD

Monoprice 5559 Adjustable Tilting QUAD Desk Mount Bracket for LCD LED, 10~23inch - Black Free space on your desk and gain improved ergonomics by using this Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.The mount attaches to the edge of a desk, table, or other horizontal surface with two attachment points at each end of the bracket. Four monitors can be attached to the mount in a 2x2 arrangement. The monitors can be tilted and rotated, allowing for easy conversion between landscape and portrait mode. It fits four monitors weighing up to 33 lbs each with either 75x75 or 100x100 VESA mounting pattern.Features: Fits monitors with VESA 75x75 and 100x100 mounting patterns Tilts +/- 30 degrees Rotates 360 degrees allowing for easy portrait or landscape orientation Steel construction with aluminum VESA plate 29.5" high and 39.4" wide SpecificationsDetails Model #5559 TypeDesk Mount Minimum VESA75 x 75 Maximum VESA100 x 100 Maximum Weight33 lbs/display Minimum Display Size10" Maximum Display Size23" Minimum ExtensionN/A Maximum ExtensionN/A Height Range29.5" and 39.4" Tilt Range?30 degrees Swivel RangeN/A Rotation Range360 degrees ConstructionSteel and Aluminum ColorBlack Wall Plate DimensionsN/A Front Plate Dimensions4.5" x 4.5" Built In LevelNo Cable ManagementNo UL CertifiedNo RoHS CompliantYesUser Manual

Havis Swing Out Dash Monitor Mount Base for Dodge Charger 2011-Current

Havis Swing Out Dash Monitor Mount Base for Dodge Charger 2011-Current

201.99 USD

Swing Out Dash Monitor Mount Base For 2011-2012 Dodge Charger

Maximize your mobile workspace with intuitive mounting and computing solutions from Havis. We strive to engineer products that make performing tasks during long shifts easier and more comfortable. Havis now offers three all new equipment consoles, including one low-profile, that allow for safer mounting of controls and accessories while providing a perfect mounting location for computer solutions.

The swing out dash monitor mount allows monitor to be conveniently positioned for optimal viewing
angles for both driver and passenger.

Features & Benefits:

  • See monitor mount configuration on how to order a complete system under additional info above
  • Dash monitor mount base
  • For 2011-2012 Dodge Charger
  • Swing out
  • Configurable for many universal computer monitors
  • Works with C-MM-200 Series monitor adapter and C-MM-300 Series adapter bracket for easy installation (sold separately)
  • Excellent space saving solution allows additional equipment to be mounted in console.
  • Designed with driver in mind - monitor conveniently swivels side to side for optimal viewing angles for both driver and passenger and passenger
  • Positions computer monitor in a safe, convenient line of sight
  • Spring latch easily secures monitor when pushed into closed position
  • No permanent vehicle modification required
  • Part Weight: 8.00 lbs

Dyconn WA302S Julia articulating TV/monitor Wall mount

Dyconn WA302S Julia articulating TV/monitor Wall mount

52.46 USD

Dyconn WA302S Julia articulating TV/monitor Wall mount Product Features * The Dyconn Julia wall mount provides smooth pivot, swivel and tilt adjustment functionality for greater viewing comfort and enhanced productivity. * Due to its unique and dynamic design, the Dyconn Julia is perfect for home and office use. * Itï¾’s slim, low-profile design enables it to retract discretely against a wall for added room space. * The universal mounting pattern fits any 13ï¾’ï¾’ ï¾– 30ï¾’ï¾’ flat panel display and supports a weight capacity of 30lbs (13.6kg). * The Dyconn Julia further facilitates the attachment and removal of displays by its convenient wall plate. Packages Contents * Dyconn Julia (WA302S) Wall Mount * Mount Installation Guide * Mounting Hardware. Specifications table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th { background-color: #8C8C8C; color: #FFF; font-weight: bold;}Model No.WA302S VESA Compatibility75x75mm / 100x100mm /200x100mm Number of Monitors Supported1 Support Monitor Size13" ï¾– 30" Monitor Weight Capacity30LBS /13.6KG SwivelMax. +/-90ï¾° TiltMax. +/-40ï¾° Pivot180ï¾° Length Extended12.6" (320mm) Length Retracted3.2ï¾”(81.5mm) MaterialSteel/Aluminum Alloy/Plastic Dimension(W*H*D)8.2" x 10" x 12.6")/208 x 254 x 320mm Weight3LBS (1.3kg)

2 Way Adjustable Tilting Monitor Desk Mount Bracket for LCD LED

2 Way Adjustable Tilting Monitor Desk Mount Bracket for LCD LED

48.99 USD

2 Way Adjustable Tilting Monitor Desk Mount Bracket for LCD LED Compatible Devices Adjustable Tilting Desk Mount Bracket for LCD LED VESA 50x50, 75x75, and 100x100 mounting patternsFree space on your desk and gain improved ergonomics by using this 2-Way Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!Using a desk mount bracket provides additional desk space by moving the monitor above the desk. It allows you to position your monitor at eye level, which reduces neck/back strain and pain from lengthy sessions in front of the computer.This mount attaches to the edge of a desk, table, or other horizontal surface with a thickness between 0.87" ~ 2.25". It has a 5.5" extension arm that can be swiveled from side to side. The monitor can be tilted up to ±12 degrees. It fits monitors weighing up to 33 lbs., with either 50x50, 75x75, or 100x100 VESA mounting patterns.Features: Fits monitors with VESA 50x50, 75x75, and 100x100 mounting patterns Tilts ±12 degrees Steel construction with welded base clamp and aluminum extension arm Height adjustable from about 8.75" ~ 15" Clamps to surfaces between 0.87" ~ 2.25" thick

Hydra digital display dual monitor wall mount w/on the fly landscape to portrait rotation

Hydra digital display dual monitor wall mount w/on the fly landscape to portrait rotation

559.0 USD

Dual multiple joint arm holds screen 3.5" from wall when retracted and 27" when fully extended. Perfect for manually rotating a flat panel screen from portrait to landscape or landscape to portrait orientation without removing the TV. Smooth tilt adjustments of +15° (forward) and -5° (back) with a locking knob and 3° side-to-side roll facilitates a variety of viewing angles and perfect screen positioning. Makes a secure installation quick and easy, simply hang the screen and turn the pre-assembled securing screws to lock in place. Integrated cable management for clean look. VESA compatibleRotates with ease from landscape to portrait or portrait to landscape orientationPre-tensioned tilt mechanism for smooth adjustmentPost installation screen leveling without use of toolsIntegrated cable management for clean lookPre-sorted hardware pack for easy installation to wood studs or concrete surfaces includedHydra digital display dual monitor wall mount with on the fly landscape to portrait rotationTV size range: 32" - 55"Max Hole Pattern: 400 x 400 Max Weight: 100Dimensions Note: 51 LB / 31 (H) / 20 (W) / 7 (D)

Havis Swing Out Dash Monitor Mount Base for Chevy Tahoe/Yukon/Suburban/Yukon XL 2007-Current

Havis Swing Out Dash Monitor Mount Base for Chevy Tahoe/Yukon/Suburban/Yukon XL 2007-Current

201.99 USD

Swing Out Dash Monitor Mount Base For 2007-2012 Chevrolet Tahoe/GMC Yukon/Suburban And Yukon XL

Features & Benefits:

  • See monitor mount configuration on how to order a complete system under additional info above
  • Dash monitor mount base
  • For 2007-2012 Chevrolet Tahoe
  • For 2007-2012 Chevrolet Tahoe, Suburban, GMC Yukon and Yukon XL
  • Swing out design allows access to AM/FM radio
  • Configurable for many universal computer monitors
  • Works with C-MM-200 Series monitor adapter and C-MM-300 Series adapter bracket for easy installation (sold separately)
  • Excellent space saving solution allows additional equipment to be mounted in console.
  • Designed with driver in mind - monitor conveniently tilts and swivels for optimal viewing angles for both driver and passenger.
  • Positions computer monitor in a safe, convenient line of sight
  • Spring latch easily secures monitor when pushed into closed position.
  • No permanent vehicle modification required.
  • Part Weight: 10.00 lbs

Cotytech Triple Monitor Desk Mount Spring Arm Quick Release-Dm-C3Sa5-C

Cotytech Triple Monitor Desk Mount Spring Arm Quick Release-Dm-C3Sa5-C

341.07 USD

Triple Monitor Desk Mount Dual Spring Arm Quick Mount/Release integrates fashion with function, delivering ergonomic performance with style. With weight capacity of 19.8lbs, this desk mount features 360 degree monitor rotation, 105 degree tilt, 360 degree swivel and 10.6 inch vertical distance height adjustments. The desk arm is designed with cable management to provide neat desk space. The monitor mount is ideal for classrooms, offices, homes, public area, industrial settings, production line and many more. This LCD desktop mount renders maneuverability, flexibility and a chic look that is sure to flatter your monitor. The multi monitor mount boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech monitor arm has been built with the end user in mind, and features easy installation while offering intuitive, practical functional design from one of the leading manufacturers of monitor mounts. All our monitor mounts offer five year warranty. Please note that monitors are not included.Specifications:Base Types:

Cotytech Dual Monitor Desk Mount Spring Arm Quick Release Dm-Cdsa5-G

Cotytech Dual Monitor Desk Mount Spring Arm Quick Release Dm-Cdsa5-G

301.48 USD

Expandable Dual Monitor Desk Mount Spring Arm Quick Release integrates fashion with function, delivering ergonomic performance with style. With weight capacity of 19.8lbs, this desk mount features 360 degree monitor rotation, 105 degree tilt, 360 degree swivel and 10.6 inch vertical distance height adjustments. The desk arm is designed with cable management to provide neat desk space. The monitor mount is ideal for classrooms, offices, homes, public area, industrial settings, production line and many more. This LCD desktop mount renders maneuverability, flexibility and a chic look that is sure to flatter your monitor. The multi monitor mount boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech monitor arm has been built with the end user in mind, and features easy installation while offering intuitive, practical functional design from one of the leading manufacturers of monitor mounts. All our monitor mounts offer five year warranty. Please note that monitors are not included.Specifications:Base Types:

Cotytech Six Monitor Desk Mount Spring Arm [Dm-C6Sa7-G]

Cotytech Six Monitor Desk Mount Spring Arm [Dm-C6Sa7-G]

609.93 USD

Six Monitor Desk Mount Spring Arm (6) Quick Release/Connect integrates fashion with function, delivering ergonomic performance with style. With weight capacity of 19.8lbs, this desk mount features 360 degree monitor rotation, 105 degree tilt, 360 degree swivel and 10.6 inch vertical distance height adjustments. The desk arm is designed with cable management to provide neat desk space. The monitor mount is ideal for classrooms, offices, homes, public area, industrial settings, production line and many more. This LCD desktop mount renders maneuverability, flexibility and a chic look that is sure to flatter your monitor. The multi monitor mount boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech monitor arm has been built with the end user in mind, and features easy installation while offering intuitive, practical functional design from one of the leading manufacturers of monitor mounts. All our monitor mounts offer five year warranty. Please note that monitors are not included.Specifications:Base Types

Cotytech-Six Monitor Desk Mount Spring Arm Quick-Clamp Base

Cotytech-Six Monitor Desk Mount Spring Arm Quick-Clamp Base

651.35 USD

Six Monitor Desk Mount Spring Arm (6) Quick Release/Connect integrates fashion with function, delivering ergonomic performance with style. With weight capacity of 19.8lbs, this desk mount features 360 degree monitor rotation, 105 degree tilt, 360 degree swivel and 10.6 inch vertical distance height adjustments. The desk arm is designed with cable management to provide neat desk space. The monitor mount is ideal for classrooms, offices, homes, public area, industrial settings, production line and many more. This LCD desktop mount renders maneuverability, flexibility and a chic look that is sure to flatter your monitor. The multi monitor mount boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech monitor arm has been built with the end user in mind, and features easy installation while offering intuitive, practical functional design from one of the leading manufacturers of monitor mounts. All our monitor mounts offer five year warranty. Please note that monitors are not included.

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 35in-55in TV)-MVPFE6055DT-C

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 35in-55in TV)-MVPFE6055DT-C

424.99 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 55" tall TV stand will easily hold a 35" - 55" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. The Camera Mount Platform turns your TV Stand into a portable Videoconferencing Center. The Platform adjusts in height from 63.25" - 73.25" to accommodate your Monitor Size. Built in cable management will help organize cables & wires. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 50.25" from floor to 52.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 200 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 55 in (91 x 61 x 140 cm) UPC# 762805007300

TygerClaw 13" - 24" Full Motion Monitor Desk Mount for 6 LCD/LED/Monitor VESA (LCD6016BLK)

TygerClaw 13" - 24" Full Motion Monitor Desk Mount for 6 LCD/LED/Monitor VESA (LCD6016BLK)

209.99 USD

TygerClaw 13" - 24" Full Motion Monitor Desk Mount for 6 LCD/LED/Monitor VESA (LCD6016BLK) Compatible Devices 13" - 24" Full Motion Monitor Desk Mount for 6 Monitors Compliant with VESA standard 75x75 and 100x100The Tygerclaw Desktop Mount is designed for LCD and LED monitors from 13" to 24". The solid and sturdy construction has a 22lb. capacity and swivels at 45 degrees. Desk stand for 6 monitors LED or LCD flat screen 13" to 24". Supports 6 screens 13 to 24 inches Supports 10kg or 22 lbs for each screens Compliant with VESA standard 75x75 and 100x100 Maximum width of the monitors can be 600mm All monitors can be rotated in landscape or portrait mode. There's cable organisation inside pole and along each arms. Swivels left & right monitors at 360 degrees independently Tilt up and down + / - 15 degrees independently Height adjustable (3 screens at a time) Manuel and hardware included Easy installation (clings to desk with screws / or can be screwed to back of desk without clamp) Heavy duty commercial grade.

Triple Screen Desktop Mount for 10''-30'' Monitor- PrimeCables

Triple Screen Desktop Mount for 10''-30'' Monitor- PrimeCables

69.99 USD

Triple Screen Desktop Mount for 10''-30'' Monitor- PrimeCables® Compatible Devices Triple Screen Desktop Mount for 10''-30'' Monitor VESA 75x 75  100X100, 10kg Each Arm Clamp basement is available Height adjustable for more comfortable viewing experience Tilt & swivel function for better viewing angle VESA 75x 75 100X100This so-called "Star" VESA plate is our most commonly used VESA adaptor. It accommodates most small to mid-size monitors with 75 x 75 mm and 100 x 100 mm VESA hole patterns. The adaptor fits to a tilter mechanism utilizing the 1.9 x 1.9 inch inside holes. The device measures 4.5 x 4.5 inches in size. For monitors with recessed VESA hole patterns an additional VESA Spacer hardware kit may be needed. Made of aircraft aluminum. Support monitor up to 30'', 10kg each arm Sleek and streamlined appearance perfectly complements any contemporary workstation. If you need more information, please check the manual  Cab-DLB113 MANUAL Trouble shooting : Solution for DBL113 Panel not-tighten enough

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 26in-32in TV)-MVPFE3280DT-C

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 26in-32in TV)-MVPFE3280DT-C

433.18 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 80" tall TV stand will easily hold a 26" - 32" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. The Camera Mount Platform turns your TV Stand into a portable Videoconferencing Center. The Platform adjusts in height from 78.25" - 89.25" to accommodate your Monitor Size. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 75.25" from floor to 77.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 150 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 80 in (91 x 61 x 203 cm) UPC# 762805007287

Havis Swing Out Dash Monitor Mount Base, Caprice 11-Current

Havis Swing Out Dash Monitor Mount Base, Caprice 11-Current

201.99 USD

Swing out mount allows monitor to conveniently tilt and swivel for optimal viewing angles for driver and passenger.

Features & Benefits:

  • Dash monitor mount base
  • For Chevrolet Caprice 2011-2012 vehicle
  • Swing out
  • Configurable for many universal computer monitors
  • Works with C-MM-200 Series monitor adapter and C-MM-300 Series adapter bracket for easy installation (sold separately)
  • Excellent space saving solution
  • Designed with driver in mind - monitor conveniently tilts and swivels for optimal viewing angles for both driver and passenger.
  • Positions computer monitor in a safe, convenient line of sight
  • Spring latch easily secures monitor when pushed into closed position.
  • No permanent vehicle modification required.
  • No AM/FM radio relocation harness needed, allows clean installation of monitor harness
  • 15 lb weight carrying rate
  • Part Weight: 10.00 lbs

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 26in-32in TV)-MVPFE3265DT-C

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 26in-32in TV)-MVPFE3265DT-C

418.01 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 65" tall TV stand will easily hold a 26" - 32" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. The Camera Mount Platform turns your TV Stand into a portable Videoconferencing Center. The Platform adjusts in height from 73.25" - 83.25" to accommodate your Monitor Size. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 60.25" from floor to 62.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 150 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 65 in (91 x 61 x 165 cm) UPC# 762805007263

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 35in-55in TV)-MVPFE6080DT-C

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 35in-55in TV)-MVPFE6080DT-C

453.8 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 80" tall TV stand will easily hold a 35" - 55" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. The Camera Mount Platform turns your TV Stand into a portable Videoconferencing Center. The Platform adjusts in height from 78.25" - 89.25" to accommodate your Monitor Size. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 75.25" from floor to 77.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 200 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 80 in (91 x 61 x 203 cm) UPC# 762805007348

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 35in-55in TV)-MVPFE6065DT-C

Marvel Vizion TV/Monitor Stand and Mount with Camera Shelf (holds 35in-55in TV)-MVPFE6065DT-C

444.56 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 65" tall TV stand will easily hold a 35" - 55" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. The Camera Mount Platform turns your TV Stand into a portable Videoconferencing Center. The Platform adjusts in height from 73.25" - 83.25" to accommodate your Monitor Size. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 60.25" from floor to 62.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 200 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 65 in (91 x 61 x 165 cm) UPC# 762805007324

Cotytech Monitor Wall Arm Quick Release/Mount [Mw-C1P1]

Cotytech Monitor Wall Arm Quick Release/Mount [Mw-C1P1]

52.67 USD

Monitor Wall Arm Quick Release/Mount integrates fashion with function, delivering ergonomic performance with style. With weight capacity of 33lbs, this monitor wall arm features 90 degree monitor rotation, 105 degree tilt and 180 degree swivel. The monitor wall mount is designed with cable management to provide neat desk space. The monitor mount is ideal for classrooms, offices, homes, public areas, industrial settings, production line and many more. This LCD wall support renders maneuverability, flexibility and a chic look that is sure to flatter your monitor. The single monitor mount boasts integrated strength through the latest engineering technology, and is tested for durability in our offshore manufacturing plant. The Cotytech monitor arm has been built with the end user in mind, and features easy installation while offering intuitive, practical functional design from one of the leading manufacturers of monitor mounts. All our monitor mounts offer five year warranty.Specifications:

Havis Dash Monitor Mount Base for Explorer 11-Current

Havis Dash Monitor Mount Base for Explorer 11-Current

201.99 USD

Features & Benefits:

  • Dash monitor mount base
  • For 2011-2012 Ford Explorer
  • Swing out
  • Configurable for many universal computer monitors
  • Works with C-MM-200 Series monitor adapter and C-MM-300 Series adapter bracket for easy installation (sold separately)
  • Excellent space saving solution allows additional equipment to be mounted in console
  • Designed with driver in mind - monitor conveniently tilts and swivels for optimal viewing angles for both driver and passenger.
  • Positions computer monitor in a safe, convenient line of sight
  • Spring latch easily secures monitor when pushed into closed position
  • Notching (modifying) dash trim bezel is required at four (4) mount brackets
  • No AM/FM radio relocation harness needed, allows clean installation of monitor harness
  • 15 lb weight carrying rate
  • Part Weight: 8.00 lbs

Alive Hand-Free Shoulder Mount Stabilizer Support Pad for Video Camera DV / DC Camcorder

Alive Hand-Free Shoulder Mount Stabilizer Support Pad for Video Camera DV / DC Camcorder

29.99 USD

Aliveâ„¢ Hand-Free Shoulder Mount Stabilizer Support Pad for Video Camera DV / DC Camcorder Compatible Devices This ergonomically well-designed shoulder mount rig kit can improve camera/camcorder stabilization. It has great features that other rigs do not have: 1. Unique shoulder support, back pad and chest pad take the most advantage of shoulder (the most stable part on body) to allow shooting more stable, and more comfortable to make better level video/movie. The shoulder support opening is adjustable to fit operator's body. 2. With the help of adjustable strap and spring loaded pad arms, the rig can be fixed on body. Therefore, hands do not necessarily to hold the rig and can operate camera and lighting etc. to focus on improving shooting quality. This also minimizes arm fatigue and stress. 3. Extension plate makes this rig more versatile to fit more types of cameras or camcorders.

Uno Innovations UN-D200SA1027FAC Black 10" - 27" Desk Monitor Mount with Swivel Arm

Uno Innovations UN-D200SA1027FAC Black 10" - 27" Desk Monitor Mount with Swivel Arm

81.0 AUD

Uno Innovations UN-D200SA1027FAC Black 10" - 27" Desk Monitor Mount with Swivel Arm Movable: Rotation: 180 degrees TV Weight Capacity: Max. load 11 lbs. VESA Compatible: VESA fits up to: 100x100mm Swivel Range: +/- 90 degrees Tilt Range: -85 degrees to +15 degrees Feature: The UNO Innovations UN-D200DA1027FAC full-motion gas spring mount displays flat panel monitors ranging from 10" to 27". The universal hole pattern is compatible with VESA size up to 100x100mm. The convenience of free space provides productivity with minimal effort for viewing and helps to reduce eye, neck, and back fatigue. The mount includes height adjustment and stabilization with cable management to keep wires organized. UN-D200DA1027FAC gas spring adjustment tilts and swivels to virtually any optimal viewing angle. The grommet or clamp basement secures the mount easily onto the desktop. Height: 20.70" ...

Height Adjustable Monitor Arm - Grommet / Desk Mount with Cable Hook

Height Adjustable Monitor Arm - Grommet / Desk Mount with Cable Hook

62.99 EUR

Height Adjustable Monitor Arm - Grommet / Desk Mount with Cable Hook Type: Mount Color: Silver Specifications: # of displays supported: 1 Mounting Options: Desk / Grommet Clamp One-touch height adjustment : No VESA Hole Pattern(s): 75x75mm, 100x100mm Wallmountable: No Display Rotation: 360° Height Adjustment: Yes Maximum Display Size: 30in Mounting Surface Thickness: 0.39 - 4in (10 - 101mm) Swivel / Pivot: 360° around the support post Tilt: +90° / -15° Weight Capacity: 30.90 lbs. Enclosure Type: Steel and Plastic Included in Package: 1 - Support Post 1 - Monitor Mount 1 - Large C Clamp 1 - Small C Clamp 1 - Hand Screw 1 - Pressure Plate 4 - Thumb Screws 4 - M6x12mm Phillips Screws 4 - M5x14mm Hex Screws 1 - M4x15mm Phillips Screw 1 - Male Round Washer 1 - Female Round Washer 1 - Cable Clip 1 - EVA Cushion 1 - M3 (2.5mm) Allen Wrench 1 - Instruction Manual Weight: 4.40 lbs.

Marvel Vizion TV/Monitor Stand and Mount with Two Shelves (holds 26in-32in TV)-MVPFS3255DT-2

Marvel Vizion TV/Monitor Stand and Mount with Two Shelves (holds 26in-32in TV)-MVPFS3255DT-2

458.68 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 55" tall TV stand will easily hold a 26" - 32" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 50.25" from floor to 52.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 150 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 55 in (91 x 61 x 140 cm) UPC# 762805007362

Marvel Vizion TV/Monitor Stand and Mount with Equipment Shelf (holds 35in-55in TV)-MVPFS6065DT

Marvel Vizion TV/Monitor Stand and Mount with Equipment Shelf (holds 35in-55in TV)-MVPFS6065DT

458.68 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 65" tall TV stand will easily hold a 35" - 55" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 60.25" from floor to 62.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 200 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 65 in (91 x 61 x 165 cm) UPC# 762805007591

Marvel Vizion TV/Monitor Stand and Mount (holds 26in-32in TV)-MVPFE3280DT

Marvel Vizion TV/Monitor Stand and Mount (holds 26in-32in TV)-MVPFE3280DT

412.8 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 80" tall TV stand will easily hold a 26" - 32" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 75.25" from floor to 77.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 150 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 80 in (91 x 61 x 203 cm) UPC# 762805007270

Marvel Vizion TV/Monitor Stand and Mount (holds 35in-55in TV)-MVPFE6065DT

Marvel Vizion TV/Monitor Stand and Mount (holds 35in-55in TV)-MVPFE6065DT

423.03 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 65" tall TV stand will easily hold a 35" - 55" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 60.25" from floor to 62.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 200 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 65 in (91 x 61 x 165 cm) UPC# 762805007317

Marvel Vizion TV/Monitor Stand and Mount with Shelf (holds 26in-32in TV)-MVPFS3265DT

Marvel Vizion TV/Monitor Stand and Mount with Shelf (holds 26in-32in TV)-MVPFS3265DT

434.16 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 65" tall TV stand will easily hold a 26" - 32" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 60.25" from floor to 62.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 150 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 65 in (91 x 61 x 165 cm) UPC# 762805007416

Marvel Vizion TV/Monitor Stand and Mount with Two Shelves (holds 35in-55in TV)-MVPFS6055DT-2

Marvel Vizion TV/Monitor Stand and Mount with Two Shelves (holds 35in-55in TV)-MVPFS6055DT-2

475.91 USD

The Marvel Vizion Mobile Flat Panel Stand with a height adjustable bracket, built in cable management steel construction is ideal for commercial use! This 55" tall TV stand will easily hold a 35" - 55" Flat Panel TV. This attractive stand was designed for use in videoconferencing, mobile digital signage, classroom, and visual presentation environments. The heavy duty steel construction provides stability for high traffic areas, while the easy roll 4" swivel casters (four lockable) allow you to move the TV Stand where you need it. Built in cable management will help organize cables & wires. The mount (screen center) adjusts from 50.25" from floor to 52.25" from floor. This universal mount will attach to most Flat Panel TV weighing less than 200 lbs. Dark Neutral Powdercoat Paint 36 x 24 x 55 in (91 x 61 x 140 cm) UPC# 762805007546

TygerClaw 13" - 23" Dual-Arm Monitor Desk Mount

TygerClaw 13" - 23" Dual-Arm Monitor Desk Mount

117.46 USD

TygerClaw 13" - 23" Dual-Arm Monitor Desk Mount Compatible Devices TygerClaw 13" - 23" Dual-Arm Monitor Desk MountUniversal mounting pattern up to VESA 100mm x 100mmThis TygerClaw PM6407BLK Dual-Arm Desk mount is designed for most 13" to 23" monitors up to 33lbs/15kgs with tilt degree from -30Ëš to +30Ëš, swivel degree up to 180Ëš, extension from desk up to 450mm, and is constructed from heavy gauge steel for total support and durability, also an innovative locking mechanism gives quick and easy installation.Features: - Medium size Desk mount - Holds most 13" to 23" monitors up to 33lbs/15kgs - Tilt degree from -30Ëš to +30Ëš - Swivel degree up to 180Ëš - Extension from desk up to 450mm - Universal mounting pattern up to VESA 100mm x 100mm - Solid heavy-gauge cold steel construction - Quick and Easy installation

Lilliput 5Dii-H 1080P Lcd On Dslr Camera Monitor Hdmi Shoe Mount By ..

Lilliput 5Dii-H 1080P Lcd On Dslr Camera Monitor Hdmi Shoe Mount By ..

209.0 USD

Lilliput 7inch TFT LCD HDMI In Field Monitor 5D-II/HProduct Features Application for Canon 5D-II? Camera in taking photos and Making Movies. key buttons functions: Up selection key: to select items on OSD menu. Press to switch on/off 5D-IImode. Down selection key: to select items on OSD menuPress to switch on/off Pixel-to-Pixel mode.Specifications: Model5D-II/H Panel Size 7" TFT LCD Aspect Ratio16:9 Resolution 1024x600, up to 1920x1080 Brightness 250cd/m2 Contrast800:1 Viewing Angle 160/ 150 Deg (H/V) Input Voltage DC 6.5-24V Input Signal HDMI Output Signal HDMI (optional) Current 800mA Power Consumption 10W Operating Temperature -20 C ~ 60 C Storage Temperature -30C ~ 70C Dimension (LWD) 196.5X145X31mm 196.5X145X41mm (with sun shade closed) 196.5x145x151.3mm (with sunshade open) Weight 515g / 665g (with cover)

TygerClaw 10" - 24" Monitor Desk Mount

TygerClaw 10" - 24" Monitor Desk Mount

82.65 USD

TygerClaw 10" - 24" Monitor Desk Mount Compatible Devices TygerClaw 10" - 24" Monitor Desk Mount Universal mounting pattern up to VESA 100mm x 75mmThis TygerClaw PM6406BLK Desk mount is designed for most 10" to 24" monitors up to 33lbs/15kgs with tilt degree from -30Ëš to +30Ëš, swivel degree up to 180Ëš, and is constructed from heavy gauge steel for total support and durability, also an innovative locking mechanism gives quick and easy installation.Features: - Medium size Desk mount - Holds most 10" to 24" monitors up to 33lbs/15kgs - Tilt degree from -30Ëš to +30Ëš - Swivel degree up to 180Ëš - Universal mounting pattern up to VESA 100mm x 75mm - Solid heavy-gauge cold steel construction - Quick and Easy installation

TygerClaw 13" - 24" Full Motion Monitor Dual-Arm Desk Mount (LCD6002)

TygerClaw 13" - 24" Full Motion Monitor Dual-Arm Desk Mount (LCD6002)

149.99 USD

TygerClaw 13" - 24" Full Motion Monitor Dual-Arm Desk Mount (LCD6002) Compatible Devices 13" - 24" Full Motion Monitor Dual-Arm Desk Mount Universal mounting pattern up to VESA 100mm x 100mmThis TygerClaw LCD6002 Dual-Arm Desk mount is designed for most 13" to 24" monitors up to 22lbs/10kgs with swivel degree up to 90˚, and is constructed from heavy gauge steel for total support and durability, also an innovative locking mechanism gives quick and easy installation.Features: - Medium size Desk mount - Holds most 13" to 24" monitors up to 22lbs/10kgs - Swivel degree from -90˚ to +90˚ - Universal mounting pattern up to VESA 100mm x 100mm - Solid heavy-gauge cold steel construction - Quick and Easy installation

Ziotek 111-0363 Monitor Swivel Mount For Post Up To 30Lb

Ziotek 111-0363 Monitor Swivel Mount For Post Up To 30Lb

69.18 USD

Ziotek 111-0363 Monitor Swivel Mount For Post Up To 30LbThis industrial-duty LCD mount, designed for use with the post or pole workstation systems, is articulated with horizontal and vertical pivot points. It is constructed of heavy-duty steel with durable nylon pivot washers and provides a very sturdy platform with no shake or unwanted motion. Supports between 16-30 pounds (7-14kg). Includes mounting hardware and 100mm adapter plate.Product SpecificationsHorizontal pivot (yaw) range: 90 degrees right or left (180 degrees total)Vertical tilt (pitch) range: 90 degrees up or down (180 degrees total)Rotation (roll) range: noneTotal standoff: 6 3/8" from pole centerMonitor mount: 75/100 VESA mountWeight limit: 30 lbs. (14kg)

Uno Innovations UN-D100SA1024AC Black 10" - 24" Desk Monitor Single Mount with Height Adjustment

Uno Innovations UN-D100SA1024AC Black 10" - 24" Desk Monitor Single Mount with Height Adjustment

2323.0 INR

Uno Innovations UN-D100SA1024AC Black 10" - 24" Desk Monitor Single Mount with Height Adjustment Mount Style: Desk Mount Feature: The UNO Innovations UN-D100SA1024AC Single Desktop Mount is customized to support flat panel monitors from 10" to 24". The universal hole pattern is compatible with VESA size up to 100x100mm. With the double-extended arm, this desktop mount tilts and swivels virtually any optimal viewing angle. The independent tensions provided in the arm extends up to 13.2" with a height adjustment from 7.9" to 15" for a more comfortable viewing experience. UN-D100SA1024AC features include cable management channel to keep wires organized and with a grommet or clamp basement for easy installation.

TygerClaw 13" - 27" Full Motion Monitor Single-Arm Desk Mount (LCD6001)

TygerClaw 13" - 27" Full Motion Monitor Single-Arm Desk Mount (LCD6001)

119.72 USD

TygerClaw 13" - 27" Full Motion Monitor Single-Arm Desk Mount (LCD6001) Compatible Devices 13" - 27" Full Motion Monitor Single-Arm Desk Mount Features a universal mounting pattern up to VESA 100mm x 100mmKeep your 13" to 27" monitor in place with this Tygerclaw Single-Arm Laptop Desk Mount. It holds up to 22lbs., features a swivel degree of up to 90 degrees, and provides support and durability thanks to heavy gauge steel construction. An innovative locking mechanism makes it quick and easy to install.More Information Medium-sized desk mount holds most 13" to 27" monitors up to 22lbs. Tilts from -90 to +90 degrees and swivels from 180 degrees Features a universal mounting pattern up to VESA 100mm x 100mm

TygerClaw 13" - 24" Full Motion Monitor Triple-Arm Desk Mount (LCD6003)

TygerClaw 13" - 24" Full Motion Monitor Triple-Arm Desk Mount (LCD6003)

161.46 USD

TygerClaw 13" - 24" Full Motion Monitor Triple-Arm Desk Mount (LCD6003) Compatible Devices 13" - 24" Full Motion Monitor Triple-Arm Desk MountFeatures a universal mounting pattern up to VESA 100mm x 100mmKeep your 13" to 24" monitor in place with this Tygerclaw Triple-Arm Desk Mount. It holds up to 22lbs., features a swivel degree of up to 90 degrees, and provides support and durability thanks to heavy gauge steel construction. An innovative locking mechanism makes it quick and easy to install.More Information Medium-sized desk mount holds most 13" to 24" monitors up to 22lbs. Tilts from -90 to +90 degrees and swivels from 180 degrees Features a universal mounting pattern up to VESA 100mm x 100mm

TygerClaw 13" - 24" Full Motion Monitor Quad-Arm Desk Mount (LCD6004)

TygerClaw 13" - 24" Full Motion Monitor Quad-Arm Desk Mount (LCD6004)

181.98 USD

TygerClaw 13" - 24" Full Motion Monitor Quad-Arm Desk Mount (LCD6004) Compatible Devices 13" - 24" Full Motion Monitor Quad-Arm Desk Mount Features a universal mounting pattern up to VESA 100mm x 100mmKeep your 13" to 24" monitor in place with this Tygerclaw Quad-Arm Desk Mount. It holds up to 22lbs., features a swivel degree of up to 90 degrees, and provides support and durability thanks to heavy gauge steel construction. An innovative locking mechanism makes it quick and easy to install.More Information Medium-sized desk mount holds most 13" to 24" monitors up to 22lbs. Tilts from -90 to +90 degrees and swivels from 180 degrees Features a universal mounting pattern up to VESA 100mm x 100mm

Flat Wall mount for LG 38inch stretch monitor

Flat Wall mount for LG 38inch stretch monitor

58.0 USD

Perfect match for LG's 38" stretch monitor. Makes a secure installation quick and easy, simply hang the screen and turn the pre-assembled securing screw to lock in place. Open wall plate design and kickstand feature provides easy access to wiring. Perfect solution for the LG 38" stretch monitorLow-profile, holds screen close to wall for a clean lookOpen wall plate allows easy access for wiringLateral shift for perfect placementPre-sorted hardware pack for easy installation to wood studs or concrete surfaces included Flat Wall mount for LG 38" stretch monitorTV size range: Max Hole Pattern: 660 x 200Max Weight: 50Dimensions Note: 6 LB / 29 (H) / 11 (W) / 4 (D)

Startech ARMCBCL Single-Monitor Mount - Cubicle Hanger

Startech ARMCBCL Single-Monitor Mount - Cubicle Hanger

60.99 USD

Startech ARMCBCL Single-Monitor Mount - Cubicle Hanger Type: Mount Color: Black Specifications: Number of displays supported: 1 Mounting Options: Cubicle Wall One-touch height adjustment: No VESA Hole Pattern(s): 75 x 75 mm / 100 x 100 mm Wallmountable: No Maximum Display Size: 30" Mounting Surface Thickness: 1.50" to 5.50" Weight Capacity 19.90 lbs. Enclosure Type: Steel, Aluminum and Plastic Included in Package: 1 x hanging cubicle monitor mount 1 x small L-bracket 1 x large L-bracket 2 x rubber pads 4 x M4x12 screws 4 x M4x25 screws 4 x spacers 1 x instruction manual Dimensions (H x W x D): 18.10" x 2.20" (H x W) Weight: 26.50 oz.

Uno Innovations UN-D150DA1024AC Black 10" - 24" Desk Monitor Dual Mount with Swivel and Height Adjustment

Uno Innovations UN-D150DA1024AC Black 10" - 24" Desk Monitor Dual Mount with Swivel and Height Adjustment

59.99 EUR

Uno Innovations UN-D150DA1024AC Black 10" - 24" Desk Monitor Dual Mount with Swivel and Height Adjustment Mount Style: Desk Mount Feature: The UNO Innovations UN-D150DA1024AC Dual Desktop Mount supports flat panel monitors from 10" to 24" and functions freely to benefit more desk space, keeping your workday more productive. The universal hole pattern is compatible with VESA size up to 100x100 mm. Features include dual-articulating arms for convenient screen positioning and extends up to 16.3" with a height adjustment from 7.9� to 15" and equipped with a security ring to ensure stable support for mounting.

Single Monitor Desk Mount Fully Adjustable Articulating Stand /For 1 LCD Screen up to 27�

Single Monitor Desk Mount Fully Adjustable Articulating Stand /For 1 LCD Screen up to 27�

29.9 USD

Single Monitor Desk Mount Fully Adjustable Articulating Stand /For 1 LCD Screen up to 27� Compatible Devices Single Monitor Desk Mount Adjustable Articulating StandFor 1 LCD Screen up to 27�-VESA Mount (75 X 75 & 100 X 100) Desk Mount for 13" -27'' Monitor  Holds One Screen up to 27" and 22lbs VESA Mount (75 X 75 & 100 X 100 mounting holes) MAX HIght :400cm  MAX extention:280cm 180degree rotate , and tilt :-70 to +70 Loading Capacity : 8 KGS (17.6lbs) integrated cable management  Quick installation and release  Support files : Cab-EDT07-C011_Manual.pdf

Fellowes Desk-Mount Dual Monitor Arm  Supports 24 Pounds  Black (Fellowes FEL8041701)

Fellowes Desk-Mount Dual Monitor Arm Supports 24 Pounds Black (Fellowes FEL8041701)

185.49 USD

Desk-Mount Dual Monitor Arm Supports 24 Pounds Black Features two monitor arms that adjust easily in every way. Easy to mount--clamp attaches to desktops 1" to 3" thick or through grommet holes at least 3 1/4� in diameter. Elevates LCD monitors from 3 1/2" to 16 1/2" above the desk with a reach of 2 1/2"-27". Tilts up or down +/- 37 degrees and freely swings left or right (360 degree rotation capability). Each arm holds an LCD monitor up to 24 lbs. Meets VESA mounting standards. Mounting: Clamp/Grommet; Depth: 38 3/4"; Width: 4 3/8"; Arm Rotation: 360°.

2009 Digital Body Fat Analyzer Monitor Health Monitor (Silver)

2009 Digital Body Fat Analyzer Monitor Health Monitor (Silver)

15.6500058 USD

Ad integrazione della misura percentuale di grasso, indice di massa corporea (BMI) e la frequenza di base del metabolismo, questo analizzatore di grasso corporeo pu¨° aiutare voi e la vostra famiglia a scoprire l'aumento o la diminuzione dimensione del grasso in modo da prevedere la salute condition.you possono tempestiva scoprire la percentuale di grasso corporeo e di cercare di bilanciare la vostra dieta quotidiana e dello sport in base al risultato di misura, in modo da raggiungere gli obiettivi di essere sano, in forma e bella.

SIIG CE-MT0Q11-S1 Articulating Dual Monitor Desk Mount - 13" to 27"

SIIG CE-MT0Q11-S1 Articulating Dual Monitor Desk Mount - 13" to 27"

73.99 EUR

SIIG CE-MT0Q11-S1 Articulating Dual Monitor Desk Mount - 13" to 27" Type: Mount Specifications: Supports monitors up to 22 lbs (10 kgs.) Screen size: 13" to 27" Tilt angle: +/-15 degrees Swivel: 360 degrees Rotation: 360 degrees Height adjustment: Up to 18" Dual articulating mounting arms extend up to 16.5" Compatible with VESA mounting 75x75mm and 100x100mm patterns Product dimensions: 3.95" (W) x 25" (H) x 35.45" (D) Product weight: 10.6 lbs Color: Black Dimensions (H x W x D): N/AXN/AXN/AIN Weight: 13.5