Vidgrids » clamp brush

clamp brush

Brauer Lh200 Hook Clamp

Brauer Lh200 Hook Clamp

27.52 GBP

Features: The action of Hook clamps in pulling two parts together makes them suitable for applications such as closing and holding closed doors, lids, moulds, etc. A benefit of hook clamps is that while the clamp and the pin, or latch bracket it engages, must be in alignment when viewed from the top, there is no such requirement when viewed from the side - the clamp will lock securely over centre regardless of the angle of the hook. The hook may be engaged either directly to a bolt or pin on one of the parts to be pulled together, or to the latch bracket provided. All hook clamps are fitted with a comfortable, cushioned orange handle grip. Specification: Components are of zinc plated and passivated steel, the hooks being high tensile alloy steel.

Clarisonic Brush Heads -Single Brush Deep Pore

Clarisonic Brush Heads -Single Brush Deep Pore

27.0 USD

Ideal for cleansing oily skin, large pores or hard to reach areas of the face, such as around the nose. The deep pore cleansing brush head is gentle enough for daily use. To keep your brush head clean, simply rinse the brush head with antibacterial soap and warm water. We recommend replacing your Clarisonic brush head every 3-4 months. How to replace your brush heads: To remove the brush head, grip the brush head firmly, then push and twist it counterclockwise (like a medicine cap) then pull the head away from the handle. To attach the brush head, push down and twist the head clockwise until it snaps into place. Be sure you hear a tight snap.

Clarisonic Brush Heads - Single Brush Sensitive

Clarisonic Brush Heads - Single Brush Sensitive

27.0 USD

Comes standard with most of cleansing brushes. An easy introduction for sensitive to normal skin types. To keep your brush head clean, simply rinse the brush head with antibacterial soap and warm water. We recommend replacing your Clarisonic brush head every 3-4 months. How to replace your brush heads: To remove the brush head, grip the brush head firmly, then push and twist it counterclockwise (like a medicine cap) then pull the head away from the handle. To attach the brush head, push down and twist the head clockwise until it snaps into place. Be sure you hear a tight snap.

Adjustable Clamp 88094 Clamp Mate Frame Clamp

Adjustable Clamp 88094 Clamp Mate Frame Clamp

19.48 USD

Adjustable Clamp 88094 Clamp Mate Frame ClampThis framing clamp has a simple operation and clamps all four corners at the same time. The clamp is self-squaring and has reversible jaws for both small and large frames. The clamps folds up easily for storage and can be assembled in a matter of minutes.Features • 5 in. x 7 in. minimum clamping • 26 in. x 30 in. maximum clamping • Non marring corners to protect frames • Steel construction for strength and durability • PonyProduct Dimension: 7.25" Length X 2.5" Height X 7.25" WidthProduct Weight (lbs.): 2.5

Clarisonic Brush Heads - Single Brush Acne

Clarisonic Brush Heads - Single Brush Acne

27.0 USD

Extra-plush bristle gradation helps to provide ultra-gentle cleansing for sensitive and acne-prone skin. To keep your brush head clean, simply rinse the brush head with antibacterial soap and warm water. We recommend replacing your Clarisonic brush head every 3-4 months. To remove the brush head, grip the brush head firmly, then push and twist it counterclockwise (like a medicine cap) then pull the head away from the handle. To attach the brush head, push down and twist the head clockwise until it snaps into place. Be sure you hear a tight snap.

Tolomeo Mega Clamp

Tolomeo Mega Clamp

600.0 USD

Design by Michele De Lucchi and Giancarlo Fassina Clamp mounted luminaire for adjustable direct and diffused incandescent or halogen task lighting. Features: Fully adjustable, articulated arm body structure in extruded, brilliant, natural anodized aluminum. Joints, tension control knobs and mountings in polished die-cast aluminum, support cables in stainless steel Diffuser with aluminum frame, available in parchment paper or in pale grey satin and polycarbonate fiber blend. Dimmer located on cord. Clamp in die-cast aluminum- max opening 2.75".

Clarisonic Brush Heads - Single Brush Delicate

Clarisonic Brush Heads - Single Brush Delicate

27.0 USD

Ultra-gentle for those with delicate or extra-sensitive skin. To keep your brush head clean, simply rinse the brush head with antibacterial soap and warm water. We recommend replacing your Clarisonic brush head every 3-4 months. How to replace your brush heads: To remove the brush head, grip the brush head firmly, then push and twist it counterclockwise (like a medicine cap) then pull the head away from the handle. To attach the brush head, push down and twist the head clockwise until it snaps into place. Be sure you hear a tight snap.

Bamboo Brush Mat bamboo brush holder

Bamboo Brush Mat bamboo brush holder

6.27 USD

For artists who want their brushes to last, this mat offers air flow while drying as well as protection from damage. Sewn onto the bottom half of the mat is a sectioned brush holder made from 100% cotton cloth. There are 12 slots for brushes ranging from 2 in. to 5 in. wide. Just insert each brush handle into the sleeve and roll the mat up. The cloth will help keep from moving and being damaged while transporting from one place to another. Tie up with two elastic strings. Measures 13 3/4 in. x 14 1/4 in.

Fuller Brush 19406 1906 Bench Brush

Fuller Brush 19406 1906 Bench Brush

21.99 USD

The Fuller Bench Brush is densely filled with a blend of natural horsehair and nylon to easily and effectively remove both fine dust and heavy debris. Our Bench Brush is densely filled with a blend of natural horsehair and nylon to easily and effectively remove both fine dust and heavy debris. Natural wood handle. Handy hang up hole for convenient storage.Made with a blend of natural horsehair and nylon Made in the USACollection: 1906 Height: 3 Length: 14-1 2 Width: 1-3 4

Cannon 2207327 Clamp Mount

Cannon 2207327 Clamp Mount

69.95 USD

"Cannon Clamp Mount Brand New Includes One Year Warranty, Product # 2207327 The Cannon 2207327 is a clamp mount that secures downrigger to the gunwale or transom. This works with Lake-Troll, Sport-Troll, Easi-Troll and Mini-Mag downriggers. It is built with machined aluminum and powder coated to resist corrosion and has a clamp opening 2"". 2207327 Features: Clamp Mount, Maximum Clamp Opening is 2 Inches, Built w/Machined Aluminum, Powder Coated to Resist Corrosion"

Brauer Va300/2B Auto Clamp

Brauer Va300/2B Auto Clamp

72.07 GBP

Features: The heavy duty vertical series are designed to be adaptable and durable, and to withstand abuse in heavy duty applications.Specification: The main components are of steel, the forked lower handles being precision alloy steel castings, and all axles of hardened steel running in either hardened bushes or directly in the close-toleranced holes of hardened steel. The clamps are finished chemi-black.Supplied with hex head spindle and flanged washers.

Fuller Brush 19012 1906 All Purpose Brush

Fuller Brush 19012 1906 All Purpose Brush

15.99 USD

The Fuller All Purpose Brush is made with Tampico bristles, which makes it tough enough to clean hard surfaces easily The natural Tampico fill in this brush is highly absorbent, heat resistant and slightly abrasive. Great for scrubbing vegetables, stains on the carpet, upholstery and any tough job in the kitchen. Use wet or dry for those really tough cleaning jobs.Made with tampico bristles Made in the USACollection: 1906 Length: 10 Width: 3

Talak Clamp Lamp

Talak Clamp Lamp

670.0 USD

Design by Neil Poulton, 2005. Clamp mounted luminaire for direct task fluorescent lighting. Body in injection molded thermoplastic incorporating miniature T2 fluorescent light source. Body rotates 360eg; on the horizontal plane and can be adjusted in height by sliding it along its stem. Body in matte white powder coated finish. Stem in polished chrome steel. Clamp in die-cast aluminum with maximum opening of 2". On/off switch on body.

Easel Lamp lamp with clamp

Easel Lamp lamp with clamp

90.2 USD

Specifically designed for painting, drawing, or displaying on a easel. The lamp can also be easily clamped on to any flat surface. The aluminum lamp hood is attached to a flexible arm which allows you to move and direct the light source in a variety of positions and angles. Comes with one 11 watt low energy/heat daylight simulation bulb. Long electrical cord. Replacement 11 watt spiral bulb U12617 sold separately.

6 Inch Spring Clamp

6 Inch Spring Clamp

5.19 USD

Don't worry about how you're going to hang your decorating fabrics, our heavy-duty Metal Spring Clamps make it easy. These versatile clamps can also be used for hanging posters, murals, banners, backdrops and more.Made of steel with rubber grips and tipsAvailable in 2 sizesMedium - 4 1/4" long x 3/4" wideLarge - 6 1/4" long x 1" wide

Multi Function Makeup Brush Eyebrow Brush Eyelash Brush

Multi Function Makeup Brush Eyebrow Brush Eyelash Brush

1.99 USD

Eyebrows Brush hair:Nylon Brush; Quantity (pcs):1; Style:Small Brush; Lenth(cm):11.5; Category:Concealer Brush,Eyelash Brush,Brow Brush; Quantity (pcs):1; Features:Portable,Synthetic,Travel; Brush Hair Material:Nylon; Brand:Others; Quantity Range (pcs):1-5; Application:Eye; Handle Material:Wood; Compatible With:Eyebrow,Concealer

Clarisonic Brush Heads -Twin Brush Acne

Clarisonic Brush Heads -Twin Brush Acne

44.0 USD

Get two Acne brush heads (a $50 value!). Extra-plush bristle gradation helps to provide ultra-gentle cleansing for sensitive and acne-prone skin. To keep your brush head clean, simply rinse the brush head with antibacterial soap and warm water. We recommend replacing your Clarisonic brush head every 3-4 months.

Flexline Track Support Clamp 85

Flexline Track Support Clamp 85

201.0 USD

Rigid wall support for the Flex-Line track. Track can be mounted to the support by attaching onto the clamp head. Support is mounted to the wall with a mounting screw. Supports should be place approximately every 3 feet. Sections with a tight radius or sharp curves may require more.

Snappy Brush Wand (Crease Brush+Smudge Brush+Eyeliner Brush)

Snappy Brush Wand (Crease Brush+Smudge Brush+Eyeliner Brush)

30.99 USD

Women's 3pcs . A trio of portable makeup brushes Contains three interchangeable magnetic brushes Designed for use with the Glamour Eye & Lip Palette or with any favorite eye makeup Features handy sizes that fit perfectly into even the smallest clutch for touch-ups on the go

Clarisonic Brush Heads -Twin Brush Delicate

Clarisonic Brush Heads -Twin Brush Delicate

44.0 USD

Get two Delicate brush heads (a $50 value!). Ultra-gentle for those with delicate or extra-sensitive skin. To keep your brush head clean, simply rinse the brush head with antibacterial soap and warm water. We recommend replacing your Clarisonic brush head every 3-4 months.

Sondpex Clamp Champion

Sondpex Clamp Champion

24.99 USD

The sondpex camp champion allows you to quickly and easily clam your device to almost anything, such as your leg, cabinet, car, or just standing alone. This allows you to use your hands while watching your favorite shows, reading recipes, or just surfing the net!

Jane Iredale Snappy Brush Wand (Crease Brush+Smudge Brush+Eyeliner Brush) 3pcs

Jane Iredale Snappy Brush Wand (Crease Brush+Smudge Brush+Eyeliner Brush) 3pcs

12.0 USD

A trio of portable makeup brushes Contains three interchangeable magnetic brushes Designed for use with the Glamour Eye & Lip Palette or with any favorite eye makeup Features handy sizes that fit perfectly into even the smallest clutch for touch-ups on the go

Kennedy Industrial G-Clamp Adaptor

Kennedy Industrial G-Clamp Adaptor

10.91 GBP

Acts as a 'third arm' allowing many clamping set-ups not normally possible without the use of additional or oversized clamps. Locates onto the cross-section of the clamp frame allowing clamping pressure to be applied between the clamp frame and the workpiece.

Brauer Tc79 Toggle 'G' Clamp

Brauer Tc79 Toggle 'G' Clamp

43.07 GBP

Features: Comfortable, cushioned PVC orange handle grips. With flanged base and fixed position spindle.Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use.

So Big Brush brush

So Big Brush brush

1.37 USD

A great value at an economical price. This is a plastic brush with a large handle for younger children to use with different kinds of paint for wide brush strokes. Stiff bristles make this the perfect tool for tempera or poster paints. Series 208.

Wahl ES Brush-Wahl Cleaning Brush

Wahl ES Brush-Wahl Cleaning Brush

4.99 USD

"Cleaning Brush, The Wahl Cleaning Brush is ideal for cleaning off stray facial hairs in or around your shaver. You can use it daily for maximum maintenance of shaver. Cleaning Brush Features: Shaver Cleaning Brush, Use Daily to Clean Razor"

Irwin Marples Tm130 Clamp Head

Irwin Marples Tm130 Clamp Head

22.8 GBP

M130A low cost alternative to a full size sash clamp. Clamp heads have a cast grey iron head and slide with a steel main screw. Clamp heads are designed to be fitted to a wooden batten 25mm (1�) thick by 38mm(1½�) wide and any length.

Clamp-On Table Easel each

Clamp-On Table Easel each

51.68 USD

This black and chrome easel clamps to table tops, chair backs and many other surfaces, whether vertical, horizontal or angled. It-s sturdy enough to use for work and attractive enough to use for display. Maximum canvas height is 29 in.

Indexa Cc02 150X38Mm Bore Clamp

Indexa Cc02 150X38Mm Bore Clamp

27.72 GBP

CC02 - Bore ClampThe cylindrical pin minimises the contact area. This clamp is for clamping inside horizontal bores and onto concave surfaces.Material: Medium Carbon Steel.Heat Treated To: HR C32 - 38.Surface Finish: Black Oxide.

Indexa Cc08 60Mm Swing Clamp

Indexa Cc08 60Mm Swing Clamp

79.57 GBP

CC08 - Swing ClampA small clamp with good holding power, ideal for tight spaces, full swing away feature permits easy part loading.Material: Case Hardened Steel.Hardness: HRC 38 - 42.Surface Finish: Black Oxide.

Pinzbohr Clamp Screw

Pinzbohr Clamp Screw

0.8 GBP

Clamp ScrewTo suit standard boring headsBody DesignationPNZ-140-0610K.. 22 75 400PNZ-140-0630K.. 27 75 409.. 32 75 409.. 42 75 300.. 54 75 300.. 68 75 2CT 300.. 85 75 3CT 300.. 100 75 3CT 300.. 200 75 3CT 300

Kennedy Industrial Corner Clamp

Kennedy Industrial Corner Clamp

15.13 GBP

Ideal for use with wood, angle and tubing. Clamping jaws swivel to accept various widths. Die cast aluminium body with bench mounting.Base : 158 x 158mm. Jaw depth: 36mm.Slot width: 10mm.

Brauer Cr4000 Cam Clamp

Brauer Cr4000 Cam Clamp

133.42 GBP

Brauer Cam-Ram Magna Force ? clamps deliver clamping force in a straight line pushing or pulling.Rotation: Clockwise.Clamping Force: 750daN Hand, 4000daN MalletWeight: 0.55Kg

Indexa 2109 Clamp Set

Indexa 2109 Clamp Set

16.25 GBP

Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.

Gineyea Road Bike MTB Seatpost Clamp Seat Post Clamp Quick Release QR 34.9mm (Golden)

Gineyea Road Bike MTB Seatpost Clamp Seat Post Clamp Quick Release QR 34.9mm (Golden)

3.69 Gin

This Gineyea Road Bike MTB Seatpost Clamp Seat Post Clamp Quick Release QR 34.9mm is 100% brand new with high quality, which is made of AL6061, great for DIY project.

Gineyea Road Bike MTB Seatpost Clamp Seat Post Clamp Quick Release QR 31.8mm (Golden)

Gineyea Road Bike MTB Seatpost Clamp Seat Post Clamp Quick Release QR 31.8mm (Golden)

3.69 Gin

This Gineyea Road Bike MTB Seatpost Clamp Seat Post Clamp Quick Release QR 31.8mm is 100% brand new with high quality, which is made of AL6061, great for DIY project.

Bicycle Seatpost Clamp Lamp 31.8mm Bike Quick Release Seatpost Clamp Lamp (Golden)

Bicycle Seatpost Clamp Lamp 31.8mm Bike Quick Release Seatpost Clamp Lamp (Golden)

9.79 Bic

This Bicycle Seatpost Clamp Lamp 31.8mm Bike Quick Release Seatpost Clamp Lamp is 100% brand new with high quality, made of AL6061, perfect replacement for bicycles.

Bicycle Seatpost Clamp Lamp 34.9mm Bike Quick Release Seatpost Clamp Lamp (Golden)

Bicycle Seatpost Clamp Lamp 34.9mm Bike Quick Release Seatpost Clamp Lamp (Golden)

9.99 Bic

This Bicycle Seatpost Clamp Lamp 34.9mm Bike Quick Release Seatpost Clamp Lamp is 100% brand new with high quality, made of AL6061, perfect replacement for bicycles.

Rutland Clamp-On Tap Connector

Rutland Clamp-On Tap Connector

5.05 GBP

This male snap action tap connector has a flexible coupler on the other end which fits most taps and is then tightened onto the tap by twisting the butterfly screw.

Shunt (Back-up rope clamp)

Shunt (Back-up rope clamp)

64.95 USD

Used below the rappel device, the SHUNT works as a rappel back-up and replaces self-jamming knots like the Prusik. Works on single and double ropes.

Indexa Cc01 100Mm U-Clamp

Indexa Cc01 100Mm U-Clamp

16.25 GBP

CC01 - U-ClampOpen end permits quick and easy installation.Material: Medium Carbon Steel.Heat Treated To: HRC 32 - 38.Surface Finish: Black Oxide.

Stahlwille 12975 Fuel Hose Clamp

Stahlwille 12975 Fuel Hose Clamp

7.96 GBP

Spring loaded, clamps brake and fuel hoses to allow brake/clutch slave cylinders to be disconnected or removed with the minimum of fluid loss.

"Kennedy Industrial 36"" Sash Clamp"

"Kennedy Industrial 36"" Sash Clamp"

35.69 GBP

SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel. Main screw and handles are made from high grade steel.

Indexa Cc20Nc6 M16X150Mm 'S' Clamp

Indexa Cc20Nc6 M16X150Mm 'S' Clamp

73.1 GBP

CC20 - Forged Swivel ClampMaterial: Medium Carbon Steel/Steel Forging.Heat Treated To: 32 - 38°.Surface Finish: Black Oxide.

1/4" Ear Clamp

1/4" Ear Clamp

0.75 USD

This 1/4" ear clamp is a necessity to have in your tool box. Make sure you have available when you air hose gets a leak!

Irwin T59200Ecd 59200 Handi Clamp

Irwin T59200Ecd 59200 Handi Clamp

8.21 GBP

Squeeze to adjust and click to release. Manufactured from high-tech resin for a lightweight and durable clamp.

Brauer Ms0650 Spindle For Clamp

Brauer Ms0650 Spindle For Clamp

4.51 GBP

Brauer Brauer Ms0650 Spindle For Clamp Spindle Nose & Workholding > Workholding > Fixturing > Toggle Clamps

Indexa Cc05 100X38Mm Plain Clamp

Indexa Cc05 100X38Mm Plain Clamp

20.88 GBP

CC05 - Plain ClampMaterial: Medium Carbon Steel.Heat Treated To: HRC 32 - 38.Surface Finish: Black Oxide.

Brauer Va1200/2C Auto Clamp

Brauer Va1200/2C Auto Clamp

120.64 GBP

Brauer Brauer Va1200/2C Auto Clamp Spindle Nose & Workholding > Workholding > Fixturing > Toggle Clamps

Senator 250X73X165Mm Adjustable Bar Clamp

Senator 250X73X165Mm Adjustable Bar Clamp

20.47 GBP

For parallel clamping of large and irregular shaped objects. Quick action with locking screw.