Vidgrids » cmc single stage

cmc single stage

Crystal Quest Single Under Sink 7 Stage Fluoride Water Filter

Crystal Quest Single Under Sink 7 Stage Fluoride Water Filter

119.0 USD

Crystal Quest CQE-US-00315 Mega Undersink Single Replaceable Fluoride Multi Water Filter SystemProduct Features CRYSTAL QUEST Mega Undersink Replaceable Single Fluoride Multi Water Filter System is stylish, convenient and effective.Water travels through 7 stages of filtration In stages 1 and 7, water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter. In stage 2, water travels through FLUORIDE REMOVAL resin containing synthetic Aluminum Oxide adsorbant media specifically designed to have a high affinity for Fluoride, Lead and Arsenic. It removes metals through a mixture of adsorption and chemical reaction with the media; therefore, the elimination is not reliant on ion exchange. It has uniform particle size, is physically stable and can be used over a wide pH range. Capacity: 2700 ppm Fluoride (Avg. 600 to 900 Gallons) . As high as 6600 ppm F+ with effluent levels below 0.2 ppm from 10 ppm F+ feed. In stage 4, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness. In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc ( ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy) principles. Chlorine is instantaneously and almost inexhaustibly oxidized. In stage 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.Please note: When considering installation, if current under sink plumbing is hard copper tubing the saddle valve would be used; for flex tubing the T-valve would be required. While ordering a prompt will require that an installation valve be specified in order to progress through the order entry screen.Additional Information: Min Operating Pressure: 20 psi (pounds per sq. in.) Max Operating Pressure: 60 psi (pounds per sq. in.) Min Operating Temperature: 40 degrees F Max Operating Temperature: 90 degrees F Max Flow Rate: 0.3-0.5 gallons per minute

CMC Rescue Rescue 8

CMC Rescue Rescue 8

62.99 USD

The classic CMC Rescue 8 has been refined for even better performance with the current selection of rescue rope sizes from 7/16" to 5/8". Today 5/8" rope is no longer common, and the smaller dimensions of the new design provide greater control.

  • Material: Steel, Nickel-chrome Plated, or Aluminum, N.F.P.A., Black Finish
  • Proprietary finish on aluminum model provides outstanding wear resistance
  • Nickel-chrome plated steel model excels in exceptionally high-wear situations such as helicopter operations or sandy, gritty environments
  • Extended carabiner hole provides room for multiple carabiners
  • Both models machined from ½" plate
  • Large hole diameter.: 2.5 in.
  • U.L.-classified to N.F.P.A. 1983, General Use
  • N.F.P.A. 1983 strength requirement for Descent Control System Components is 22 kN (4,946 lbf)
  • Specifications, Nickel-chrome plated steel Rescue 8:
  • 3 sigma M.B.S., 8,992 lbs (> 40 kN)
  • Weight, 1 lb. 3.3 oz
  • Specifications Aluminum with proprietary black finish Rescue 8:
  • 3 sigma M.B.S., 8,992 lbs (> 40 kN)
  • Weight, 6.6 oz.
  • 3 sigma is a statistical method for reporting minimum breaking strength (MBS) that provides a 99.87% certainty of the result. N.F.P.A. 1983 and several other standards have adopted it. CMC Rescue uses the 3 sigma method whenever possible

CMC Rescue Escape Artist

CMC Rescue Escape Artist

128.99 USD

UL Classified to NFPA 1983 - Escape - Patented

The Most Advanced Escape Descent Control Device Available

The Escape Artist is fast becoming the industry standard, thanks to its hands-free edge transition and optimal descent control. When evaluating descenders side by side, many departments prefer the Escape Artist to other alternatives. Intended to be pre-rigged on an escape line and kept ready for immediate use, the Escape Artist pays out the rope smoothly and then locks when loaded, leaving both hands free to negotiate the exit. Squeezing the lever controls the descent rate. Intended for the most extreme conditions, the Escape Artist features all-metal construction and minimal parts to ensure durability and reliable performance. The handle is located inside the side plates to reduce the potential of catching on an edge and to increase mechanical advantage for easier control. The unique design of the double-brake version ensures that if you squeeze the handle too hard, the Escape Artist will slow or stop your descent. The modified cam is designed to work with rope and CMC’s new FR Escape Web.

The Escape Artist uses a wrap-and-a-half of the rope around the cam to activate the auto-locking function. This simple,patented design provides foolproof activation while limiting the forces on the rope in the event of a fall,increasing safety. The cam has been updated with a new flange that extends a full 270° around the circumference, providing better rope guidance and optimizing the design for use with either escape cord or our new FR Escape Web.

Escape Artist features:

  • Variable friction allows user to control rate of descent
  • Patented auto-locking design allows hands-free edge transitions
  • Works equally well with or without gloves of all types
  • Constructed of aluminum and stainless steel
  • Compact and lightweight

CMC Rescue Fire Rescue Harness, Black/Red

CMC Rescue Fire Rescue Harness, Black/Red

374.99 USD

UL Classified to NFPA 1983 - Class III and ANSI Z359.1

This versatile, multiple-use harness for fire rescue features our new JackBack™ removable padding with breathable D3 cloth, which keeps shoulder straps separated, making donning and doffing faster. Used by fire department rescue teams, USAR teams, helicopter crews, and wilderness SAR teams, this extremely popular harness also features a dorsal D-ring that allows adjustment for different size rescuers, but stays in place when loaded, greatly increasing comfort. Gear loops have been improved for easier access. The front waist D-ring allows a comfortable, stable sitting position for rappels and the sternum D-ring works well for helicopter hoists. Quick-connect shoulder straps and leg loops make donning the harness simple and fast. Pads on the leg loops can be adjusted to the most comfortable position. The front lift assembly accepts screw links for adding a chest ascender or safety lanyards. Attachment points: front waist, sternal, dorsal.

The Advantage of the Fixed Dorsal D-Ring
While the dorsal D-ring on our Fire-Rescue and Rigger’s Harnesses adjusts so it can be properly positioned, it is designed not to slide up when the D-ring is loaded. If the force of loading the harness, either under normal use or during a fall, slides a dorsal D-ring up toward the back of the user’s head, the web going over the shoulders could pinch in toward the user’s neck. Not only is this uncomfortable, it could even compromise the carotid arteries with severe results. Fixing the dorsal D-ring to the rear waist portion of the harness prevents this from occurring and allows the peak impact force to be absorbed by the pelvis and the thighs—as opposed to the back—increasing rescuer comfort and safety.

CMC Rescue Titanium Split-Apart Rescue Litter

CMC Rescue Titanium Split-Apart Rescue Litter

2650.0 USD

Tapered with StratLoad™ Attachment Points

Absolutely the premium choice in litters whether you are backpacking the litter in or carrying it as standard equipment on a helicopter, the lightweight Titanium Split-Apart nests for storage, then assembles quickly. Its nested length is less than 45in. (114 cm), and it comes with four litter straps.

Split-Apart Litter Backpack (not shown) is available by special order.

Rescue Litter Specifications:

  • Length: 83 in. (211 cm)
  • Width: 23 in. (58 cm)
  • Height: 7.25 in. (18.5 cm)
  • Load Rating: 11 kN (2,473 lbf.)


StratLoad™ Attachment Points
The patented StratLoad Attachment Points for our litters allow any size carabiner to be used to attach a lifting bridle while keeping both the carabiners and the lifting bridle on the inside of the litter’s top rail. This provides protection from abrasion along cliff faces and building walls. The StratLoad feature also prevents cross gate and side loading of carabiners and orients the direction of pull along the spine of the carabiner, where it is strongest. StratLoads are 1/4 in. (6mm) thick with a full round radius on the inside edge, allowing the option of a soft attachment, which is then protected by the top railing. StratLoads are now standard on all stainless and titanium litters.

Shipping Charges on Litters and Litter Wheels:To save freight expense to our customers, most litters and litter wheels are drop shipped directly from the factory. There is a flat rate shipping fee of $95 USD per item being shipped within the lower 48 states. Please allow up to 4 weeks for delivery.

CMC Rescue System Lifting Bridle

CMC Rescue System Lifting Bridle

343.99 USD

Spec Pak Patient Extrication System

This unique patient packaging and extrication system combines a short spine board with the support of a full-body harness. The polyethylene backboard provides rigidity and a smooth sliding surface for confined space extrications. Handles at the side and head provide grip points for handling the patient. The unique self-adjusting cervical restraint eliminates problems associated with lifting a patient vertically while secured to a rigid backboard. The Spec Pak is only intended as a limited spinal immobilization system and must be used with proper spinal immobilization where conditions and protocols indicate. Spec Pak Lifting Bridle System and storage bag are included.

The Spec Pak Lifting Bridle System, now included with Spec Pak, allows for horizontal, semi-sitting and semi-vertical (80-degree) positioning of the patient. This method of lifting is useful when longer suspension times are anticipated, reducing the chances of the patient developing further suspension syndrome. The Lifting Bridle attaches to the newer style chest-mounted D-rings on Spec Pak. The head, crotch and leg straps allow for complete stabilization of the patient without the requirement of a full litter. The bridle easily adjusts with the use of Ancra Cam Buckles (6kN). Lifting Bridle has a full-strength (22.2 kN) backup strap for attachment to the head D-ring. All carabiners and connectors are included.

#CMC721903 SYSTEM, SPEC PAK PATIENT EXTRICATION includes Spec Pack Lifting Bridle System.

#CMC721923 SYSTEM, SPEC PAK LIFTING BRIDLE. Purchase this item to upgrade previous Spec Pak System purchased without bridle. Note: MUST be newer Spec Pak System model with D-Ring attachment.

CMC Rescue Titanium Rescue Litter

CMC Rescue Titanium Rescue Litter

2125.0 USD

Tapered with StratLoad™ Attachment Points

Amazingly strong and light, lift our ultra-lightweight Titanium Litter with one hand and you’ll have to have one. Built to the same specifications and dimensions as our stainless litters,the titanium model is lighter by 18 pounds. Like the stainless steel models, the titanium models have Durathene™ netting, molded high-density polyethylene back support and come with four litter straps.

StratLoad™ Attachment Points
The patented StratLoad Attachment Points for our litters allow any size carabiner to be used to attach a lifting bridle while keeping both the carabiners and the lifting bridle on the inside of the litter’s top rail. This provides protection from abrasion along cliff faces and building walls. The StratLoad feature also prevents cross gate and side loading of carabiners and orients the direction of pull along the spine of the carabiner, where it is strongest. StratLoads are 1/4 in. (6mm) thick with a full round radius on the inside edge, allowing the option of a soft attachment, which is then protected by the top railing. StratLoads are now standard on all stainless and titanium litters.

Shipping Charges on Litters and Litter Wheels: To save freight expense to our customers, most litters and litter wheels are drop shipped directly from the factory. There is a flat rate shipping fee of $95 USD per item being shipped within the lower 48 states. Please allow up to 4 weeks for delivery.

CMC Rescue Confined Space Rescue Team Kit

CMC Rescue Confined Space Rescue Team Kit

9503.99 USD

This kit has the minimum equipment for the entrant, attendant, stand-by rescuer, main-line operator and be layer to set up systems for vertical entry into a confined space for both rescue and patient transport. For a complete confined space solution, add or use your own communication, gas monitor, and ventilation equipment.

Kit Contents:

  • Fire-Rescue Harness (2)
  • Lifesaver Victim Chest Harness
  • Shasta Gear Bag
  • #2 Rope Bag (3)
  • 7/16" Static-Pro Lifeline - 200'
  • 1/2" Static-Pro Lifeline - 200'
  • 1" Web - 100' (5x20')
  • ProSeries Pulley (5)
  • Access Pulley
  • Born Entry-Ease
  • ProTech Oval
  • Long Prusik Loop (3)
  • Sked Basic Rescue System
  • Load Release Strap
  • Edge Pad - XL (2)
  • FastLink Anchor Strap
  • CMC Helmet (5)
  • Confined Space Entry and Rescue Manual
  • Sked-Evac Tripod & Bag
  • Lifesaver Victim Harness
  • Lassen Duffel Bag, Med (2)
  • Rope & Equipment Bag, Med
  • 1/2" Static-Pro Lifeline - 200'
  • 1/2" Static-Pro Lifeline - 200'
  • 1" Web - 48' (4x12')
  • Anchor Plate
  • Access Double Pulley
  • ProSeries Screw-Lock (16)
  • ProSeries Manual-Lock (2)
  • Short Prusik Loop (4)
  • Mill Full Body Splint
  • Riggers Gloves (5 pairs)
  • Alta Knee Pad (5 pairs)
  • Anchor Strap Sleeve
  • EOS Headlamp (2)
  • Confined Space Entry & Rescue Field Guide

Crystal Quest 6 Stage Single Undersink Water Filter

Crystal Quest 6 Stage Single Undersink Water Filter

109.0 USD

Crystal Quest CQE-US-00303 Mega Undersink Single Replaceable PLUS Water Filter SystemProduct Features Water travels through 6 stages of filtration CRYSTAL QUEST Mega Single Undersink Water Filter eliminates the impurities of tap water to offer great taste and pureness. The perfect solution for any household, it is quick and easy to install and use, attractive, convenient, and effectively removes many contaminants from water. This solid state water filter uses the latest technologies that blend the adsorption capabilities of coconut shell activated carbon with Eagle Redox Alloy and more. 6 stages of filtration. Removes many contaminants from water Installs neatly under the sink. Comes with an attractive faucet and all necessary installation hardware. Conveniently provides 10,000 gallons of water. (1-3 years, or when the flow of water will automatically either stop or slow down greatly.) Great for homes, apartments or office use.Please note: When considering installation, if current under sink plumbing is hard copper tubing the saddle valve would be used; for flex tubing the T-valve would be required. While ordering a prompt will require that an installation valve be specified in order to progress through the order entry screen.Additional Information: Min Operating Pressure: 20 psi (pounds per sq. in.) Max Operating Pressure: 60 psi (pounds per sq. in.) Min Operating Temperature: 40 degrees F Max Operating Temperature: 90 degrees F Max Flow Rate: 0.5 gallons per minute

CMC Rescue CMC Lifeline, 11mm, 200 ft., Black

CMC Rescue CMC Lifeline, 11mm, 200 ft., Black

243.99 USD

UL Classified to NFPA 1983

Featuring the optimum balance of strength, handling, and durability with minimum sheath slippage, this 100% nylon kern mantle rescue rope offers excellent knot-ability and provides a high level of control when used with a descent control device. The industry standard for those who prefer traditional nylon ropes, CMC Lifeline is a great choice, whether you are a firefighter on a high-rise, performing a high-angle mountain rescue, responding to an industrial accident, or a tactical officer on rappel.

CMC Lifeline Specifications
The following specifications apply to all diameters of CMC Lifeline:

  • Certification — UL Classified to NFPA 1983 Standard on Life Safety Rope and Equipment for Emergency Services, 2006 Edition.
  • Construction — Block creel, static kernmantle.
  • Fiber — 100% nylon.
  • Sheath — 32-strand braided, with half the strands having a left(Z) twist and the other half having a right (S) twist for a balanced,torque-free rope with maximum abrasionresistance.
  • Strength — NFPA General Use for 12.5 mm (1/2 in.)and 16 mm (5/8 in.) NFPA Light Use for 9.5 mm (3/8 in.) and 11 mm (7/16 in.)
  • Temperature — Melt point 460° F (238° C).
Made in the U.S.A.

CMC Rescue ProSeries Uniform Rappel Belt, Black

CMC Rescue ProSeries Uniform Rappel Belt, Black

47.99 USD

Designed for Emergency Rappel

In a class by itself, CMC Rescue offers the only NFPA Certified Uniform Rappel Belt available. Designed for everyday wear but with the performance needed for an emergency rappel or belay. Standard uniform wear for search and rescue, SWAT and fire rescue personnel, the belt is constructed to the same exacting standards as our harness line and is the only certified uniform belt available. The tail end of the belt and the V-ring attachment point are secured out of the way with hook and loop. This belt is not intended as a substitute for a harness unless the optional Leg Loops are used.

  • Made in the U.S.A.
  • Hook and loop style strip holds V-Ring out of the way
  • Compatible with CMC Rescue Rappel Belt Leg Loops
  • U.L. Classified to N.F.P.A. 1983 Escape Belt
  • Color: Black
  • Sizes:
    • Small: fits waist sizes 26 - 32 in (66 - 81 cm)
      • 9oz (255g)
    • Large: fits waist sizes 30 - 36 in (76 - 91 cm)
      • 9oz (255g)
    • X-Large: fits waist sizes 40 - 48 in (102 - 122 cm)
      • 10oz (283g)

CMC Rescue CMC Lifeline, 16mm, 200 ft., Orange

CMC Rescue CMC Lifeline, 16mm, 200 ft., Orange

378.99 USD

UL Classified to NFPA 1983 Featuring the optimum balance of strength, handling, and durability with minimum sheath slippage, this100% nylon kernmantle rescue rope offers excellent knot ability and provides a high level of control when used with a descent control device. The industry standard for those who prefer traditional nylon ropes, CMC Lifeline is a great choice, whether you are a firefighter on a high-rise, performing a high-angle mountain rescue, responding to an industrial accident, or a tactical officer on rappel.Please contact customer service for maximum length available.

CMC Lifeline Specifications

The following specifications apply to all diameters of CMC Lifeline:

  • Certification— UL Classified to NFPA 1983 Standard on Life Safety Rope and Equipment for Emergency Services, 2006 Edition.
  • Construction — Block creel, static kernmantle.
  • Fiber — 100% nylon.
  • Sheath — 32-strand braided,with half the strands having a left (Z) twist and the other half having a right(S) twist for a balanced, torque-free rope with maximum abrasion resistance.
  • Strength — NFPA General Use for 12.5 mm (1/2 in.) and 16 mm (5/8 in.)NFPA Light Use for 9.5 mm (3/8 in.) and 11 mm (7/16 in.)
  • Temperature —Melt point 460° F (238° C).
  • Made in the U.S.A.

CMC Rescue Carabiner, 3-Stage Auto-Locking Steel D, Gold

CMC Rescue Carabiner, 3-Stage Auto-Locking Steel D, Gold

48.99 USD

Designed to be the ultimate, general-purpose rescue carabiner. Steel Locking D's combine CMC's experience in rescue with Omega Pacific's manufacturing expertise. Using an auto-locking carabiner decreases the possibility that user will forget to lock the gate or that the gate will vibrate unlocked if kept in certain positions.

  • Auto-locking steel carabiner provides the safety of a 3-stage auto-locking gate that can be easily opened with one hand
  • Compact size maximizes strength and allows a gate opening wide enough to fit over most litter rails
  • Every Carabiner is Proof-Tested
  • Meets N.F.P.A. 1983 (current ed.), A.N.S.I. and O.S.H.A. strength standards
  • Steel construction
  • Gate type, 3-Stage Auto-Locking
  • Finish, Gold
  • 3 Sigma M.B.S., 16,185 lbs (72 kN)
  • Weight, 11 oz
  • 3 sigma is a statistical method for reporting minimum breaking strength (MBS) that provides a 99.87% certainty of the result. N.F.P.A. 1983 and several other standards have adopted it. CMC Rescue uses the 3 sigma method whenever possible

CMC Rescue Rescue Rack, 13mm

CMC Rescue Rescue Rack, 13mm

149.99 USD

UL Classified to NFPA 1983 - General Use & Light Use
Innovative Features Deliver Enhanced Performance

The CMC Rescue Rack offers several innovative features to provide enhanced performance. The “fat” aluminum bars provide excellent control for rescue loads. The bars are center drilled to reduce weight and allow better heat dissipation. The finish also prevents transfer of material to the rope, common with bare aluminum bars. The Turbo Bar at the top has a tie-off pin on the side. The second bar has a straight slot to help warn the user of a misrigged rack. Since the top two bars do most of the work, they are a full one inch in diameter. The next four angled slot bars are 7/8 inch. The stainless steel frame has a welded eye. The rack comes assembled, ready for use.

CMC's Super Finish
CMC’s Rescue Racks have the exceptionally long wearing proprietary finish that is also used on our aluminum Rescue 8s. Whether hard or soft, the surface anodizing on aluminum descenders eventually wears through. Working with a company that specializes in material coatings, we developed a finish for our Rescue 8 and Rappel 8 that outwears every descender we’ve used. After years of heavy use, test samples continue to be used in CMC Rescue School classes without showing any indication of the surface wearing through.

CMC Rescue Anchor Plate

CMC Rescue Anchor Plate

57.99 USD

UL Classified NFPA 1983 - General Use

A CMC original design that has withstood the test of time, our Anchor Plates keep the carabiners holding the different parts of your rescue system from jamming together. The hardware becomes easier to see, making safety checks more accurate. It can also keep you from clipping a carabiner into the wrong loop of the anchor web. For anchor systems, it makes an excellent collection point. Weuse the Anchor Plate in CMC Rope Rescue classes, which allows our students to set up systems faster with fewer mistakes. Hole diameters: small – 7/8 in. (22cm), large – 2 in. (51 cm).

Twenty years ago CMC introduced the Anchor Plate

as a strong, lightweight, and compact collection point for connecting a rescue system to an anchor. And that point is an important feature. Over the years we’ve seen a steady progression of “bigger, better” anchor and rigging plates with more and more holes entering the market. But the bigger the plate, the less like a collection point it becomes, increasing the potential for rotation of the plate,creating additional system extension and shock-loading if any movement or failure of an anchor occurs. In 20 years of use, we’ve not seen an operational need for more holes, a larger size, or more weight.

CMC Rescue Rappel 8, Aluminum

CMC Rescue Rappel 8, Aluminum

56.99 USD

Simple to rig and operate, Figure 8 Descenders work well for short rappels. CMC Rappel 8 works best on rope sizes from 3/8" to 7/16".

  • Design of the popular CMC Rappel has been refined
  • Slightly more compact design offers superb control on 3/8" to 7/16" rope
  • Perfect choice for SWAT teams, climbers, cavers, and sport rappellers
  • Machined from ½" aluminum plate
  • Contains almost twice the material of other small 8s, providing better heat dissipation
  • Now with CMC's exotic proprietary finish for even longer wear resistance
  • Large Hole Diameter: 2"
  • Material: Aluminum
  • 3 sigma M.B.S.: 8,093 lbs (36kN)
  • Weight: 6 oz (170g)
  • Color: Black
  • U.L.-classified to N.F.P.A. 1983, General Use
  • 3 sigma is a statistical method for reporting minimum breaking strength (MBS) that provides a 99.87% certainty of the result. N.F.P.A. 1983 and several other standards have adopted it. CMC Rescue uses the 3 sigma method whenever possible

CMC Rescue SKED Rescue System, Orange

CMC Rescue SKED Rescue System, Orange

590.0 USD

Sked® Rescue System

ORANGE

Compact storage, ease of use, and flexibility in means of transport have made the Sked stretcher popular with fire departments, rescue squads, the military, and ski patrols. Made from a heavy sheet of plastic, the stretcher becomes rigid when folded around your patient. A variety of handles and straps allows the stretcher to be transported by carrying, lifting (vertically or horizontally) by rope systems or helicopter, or towed with the stretcher sliding on the smooth bottom surface. The system comes complete with the stretcher, Cordura® nylon backpack/towing harness, two straps, horizontal lift slings, vertical lift sling, one large steel carabiner, and four removable web handles. The storage bag is 36 inches (91 cm) long by 9 inches (23 cm) in diameter.
 

CMC Rescue SKED-EVAC Industrial Tripod

CMC Rescue SKED-EVAC Industrial Tripod

1419.0 USD

Manufactured by Skedco, makers of the Sked® Stretcher, the Sked-EVAC tripod features aircraft-grade, gold-anodized aluminum legs and a cast-aluminum head. Three heavy-duty rigging anchors, located in the center, have exceptionally large holes for easy attachment. Legs adjust in 5-in. (127-mm)increments for a maximum height of 10 feet (3 m) and a minimum length for transport of 7 feet (2.1 m). The cast ladder feet swivel and come with a choice of a sure-grip rubber pad or a point for imbedding in a soft or slippery surface. Holes in the feet allow the tripod to be bolted into position. A safety chain prevents leg movement and adjusts with a screw link.

Sked-EVAC Tripod Proof Loads

These proof loads are from independent, third-party testing and determine the repeatable load rating (not the ultimate breaking strength) for the Sked-EVAC Tripod.

Height / Strength

  • 98 in. (249 cm) / 42 kN (9,500 lbf.)
  • 102 in. (259 cm) / 37 kN (8,500 lbf.)
  • 107 in. (272 cm) / 33 kN (7,500 lbf.)
  • 112 in. (284 cm) / 31 kN (7,000 lbf.)
  • 115 in. (292 cm) / 26 kN (6,000 lbf.)
  • 119 in. (302 cm) / 23 kN (5,280 lbf.)

CMC Rescue Tower Rescue Kit

CMC Rescue Tower Rescue Kit

5852.99 USD

Years of experience in our Tower Rescue classes have enabled CMC to refine the equipment list that provides safer access when working at heights, but has the minimum gear needed to initiate an onsite rescue or to respond to tower rescues. This kit provides all the equipment necessary for performing everything from one-person rappel pick-off to a team-based lowering pick-off.

Kit Contents:

  • Rope & Equipment Bag - XL (2)
  • Riggers Harness
  • FastLink Anchor Strap (4)
  • 7/16" Static-Pro Lifeline - 250' (2)
  • 1" Web - 40' (2x20')
  • Bypass Lanyard
  • MPD - 11mm (2)
  • Anchor Plate
  • ProTech Manual-Lock (7)
  • Petzl ID Descender
  • Load Tender System
  • Petzl ASAP Mobile Fall Arrester
  • Lassen Duffel Bag
  • #1 Rope Bag
  • Anchor Strap Sleeve (4)
  • 6mm Prusik Cord - 300'
  • Short Prusik Loop (4)
  • DBI EZ-Stop II Tie-Back Lanyard
  • Petzl Grillon Hook
  • Edge Pad - XL (3)
  • FastLink Pick-Off Strap
  • Single Swivel Pulley (3)
  • Delta Quick Link
  • Petzl ASAP'SORBER

CMC Rescue Ladder Belt, XX-Large

CMC Rescue Ladder Belt, XX-Large

177.99 USD

UL Classified to NFPA 1983 - Ladder Belt
Designed for Firefighting Operations

At the behest of several departments, we added a tether that extends the length of the connection out to 16-3/4 inches to reach the ladder rung. The wide padding and quick connect hardware make it comfortable and easy to do. Our lightweight auto-locking ProSeries XL Carabiner is included. Black web with red padding.

*Measure waist with turnouts on

Fire Ground Products
Our fire ground product line began with a fire department request for a ladder belt that had the comfort and quality of a CMC harness. To the traditional fall restraint and basic tool-carrying capability, we added comfort features and the strength necessary to meet the requirements of NFPA Standard 1983.

CMC has continued to expand the product line for fire ground belts and harnesses by combining our design and engineering with ongoing input from firefighters. Our products can significantly increase the safety of firefighters by providing more and better options for fall restraint and emergency escape.

CMC Rescue Rigger's Harness, Black

CMC Rescue Rigger's Harness, Black

399.99 USD

UL Classified to NFPA 1983 Class III and ANSI Z359.1

Many of the features requested by entertainment industry riggers have been incorporated into our Rigger’s Harness,making it excellent for all kinds of rope access work. New added shoulder pads provide comfort and ease of donning and doffing, while an integrated chest adjustment strap ensures vertical comfort as well. When loaded, the adjustable ANSI dorsal D-ring stays close to the back for maximum comfort and minimum neck pressure. The front waist D-ring allows a stable sitting position for rappels, and the ANSI sternal D-ring can be used for a front-mounted safety line when climbing towers or other structures. Side D-rings allow effective work positioning, and the front lift assembly accommodates a CROLL for ascending or the addition of a safety lanyard. The dark color minimizes visibility when working “behind the scenes,” while new subdued gray thread still allows contrast for inspection. Attachment points:front and side waist, sternal*, dorsal*.

* ANSI Fall Arrest attachment points

CMC Rescue Special Ops Harness Pack

CMC Rescue Special Ops Harness Pack

149.99 USD

The emergency services unit of a large Southern California Sheriff's Department needed a harness combined with an equipment-carrying vest. When working in a helicopter they need to be tied in, but also wanted to remove the harness leg loops for comfort and mobility. The leg loops fold up and attach to the waist with hook-and-loop retaining straps. For rappels and hoist operations, the harness has waist and sternum attachment points. The vest has pockets for a radio or compass and includes attachment points for holsters or other gear worn on a duty belt. The “drag handle” at the top of the back can be used to help lift the user into a helicopter or drag an injured team member. Shoulders have removable reflective strips that provide enhanced visibility when desired. Both the front and back feature a built-in MOLLE Attachment System. ProTech black carabiner included.

Available separately is a harness pack designed to carry a hydration reservoir and light parka. The pack attaches to the vest with side-release buckles. Olive drab green with black web.

CMC Rescue Traverse Advantage Plastic Litter

CMC Rescue Traverse Advantage Plastic Litter

735.0 USD

Featuring a fully internal stainless steel frame combined with a high-density polyethylene plastic shell that protects the patient and provides a smooth bottom surface for sliding,this litter’s frame provides a 11.1 kN (2,500-lb.) strength rating. The shell, which attaches to the top rail frame, leaving the second rail for tying in the patient, has generous cutouts for carrying the litter. The large 7/8 in. (22 mm) diameter top rail is comfortable on the hands. A closed-cell foam patient pad prevents absorption of fluids, and is resistant to the harshest cleaning agents. For high-angle evacuations,the Advantage has patented Str–at Load Attachment Points for clipping in carabiners inside the frame rails.

Shipping Charges on Litters and Litter Wheels: To save freight expense to our customers, most litters and litter wheels are drop shipped directly from the factory. There is a flat rate shipping fee of $95 USD per item being shipped within the lower 48 states. Please allow up to 4 weeks for delivery.

On-Stage Stands GS7462B Professional Single A-Frame Guitar Stand

On-Stage Stands GS7462B Professional Single A-Frame Guitar Stand

34.31 USD

On-Stage Stands GS7462B Professional Single A-Frame Guitar StandOur strongest A-Frame features heavy-duty 1" square tubing, velveteen rubber and a モuni-construction" design, meaning that there are no parts to lose. It holds both acoustic and electric guitars as well as desktop mixers and combo amps. No more need to own multiple stands when our patented stepped yoke design can hold it all! The unique shape also allows this stand to nest together with others when not in use.Applications: Single Guitar StandPadding: Velveteen RubberTubing: 1 x 1" SquareColor: Black Powder Coat Finish Features • Our strongest A-Frame • Patented stepped yoke holds both acoustic and electric guitars • Also holds desktop mixers and combo amps • Velveteen rubber padding won't damage your guitar • 10-degree tilt back angle and splayed foot print make for a stable foundation • Non-slip rubber end caps • Heavy-duty 1 x 1" tubingWarranty Info: • Labor Years: 3 • Parts Years: 3

CMC Rescue Load Tender System

CMC Rescue Load Tender System

423.99 USD

This versatile, pre-rigged system can be used anywhere a quick mechanical advantage is needed. The 50 feet of CMC’s 8-mm specialty cord allows the system to be extended to 12 feet while providing a 5:1 M/A and a breaking strength of 22 kN (4,946 lbf.). Collapse the system and store the hardware in one compartment and the rest of the rope in the other compartment. Need personal edge protection? Attach the carabiner end of the cord to an appropriate anchor, then use the included 5-mm Purcell Prusik with 7-mm Oval Quick Link to attach to your harness and you’ve got more than 40 feet of a sliding, adjustable personal anchor. Anchor Strap shown in Quick Draw Pack photo not included.

System includes:

  • 8-mm Cord (50') w/ Sewn Loop
  • ProTech Auto-Lock Carabiner w/ Keeper (3)
  • Bound-Loop Purcell Prusik (5 mm)
  • Oval Quick Link (7 mm)
  • Bound-Loop Prusik (5 mm)
  • ProTech Double Pulley (2)

Crystal Quest Countertop Arsenic Water Filter System Single-Stage

Crystal Quest Countertop Arsenic Water Filter System Single-Stage

119.0 USD

Crystal Quest CQE-CT-00149 Countertop Single Replaceable Arsenic Water Filter SystemProduct Features CRYSTAL QUEST Mega Countertop Replaceable Single Arsenic Water Filter System is dependable and built to last for years. This counter top system installs in seconds and sits on the counter top for water on demand. Quick and easy to use, stylish, convenient, and effectively removes Arsenic. Contains an Arsenic-selective resin cartridge designed specifically for reducing arsenic. Capacity: 1000 gallons, depends on the arsenic type & ppb of influent water. Sits on the counter and easily connects to any kitchen faucet. A diverter valve switches between filtered and unfiltered water. Adjustable spout for more convenience.Additional Information: Min Operating Pressure: 20 psi (pounds per sq. in.) Max Operating Pressure: 60 psi (pounds per sq. in.) Min Operating Temperature: 40 degrees F Max Operating Temperature: 90 degrees F Max Flow Rate: 0.3-0.5 gallons per minute

CMC Rescue ProPocket, Black

CMC Rescue ProPocket, Black

57.99 USD

An Original CMC Design and Still A Favorite

The Pro Pocket is designed to carry your accessory equipment—runners,trauma shears, gloves, etc.—securely attached to your harness instead of in a Stuff Bag hanging from your rescue harness or in pants pockets,where the contents sink below the harness’s leg straps, which can be difficult to access. Made of the same 1,000-denier CORDURA® nylon as our tough Rope Bags, the main compartment is large enough to fit your hand inside and it easily stores cord or bulky items. The front pocket can hold afield guide, note pad, exam gloves, phone, or pager. The small side pocket is designed for scissors and a multi-tool. Carabiner loops allow you to clip runners to the outside of the bag or put a safety tether on tools you might be using. The web strap wraps around your harness and adjusts with hook and loop, allowing a tight, secure fit on most harnesses.

CMC Rescue Truck Cache

CMC Rescue Truck Cache

243.99 USD

Made of tough 1,000-denier CORDURA® nylon with padded sides, the Truck Cache holds all the rigging hardware needed to set up a main line and a belay in a fold-open case that fits efficiently in a truck compartment. Our redesign includes improvements for organizing either MPD™ or traditional rescue systems. The Cache looks like a briefcase but has hide-away shoulder straps so it can be carried as a backpack. The Cache also can be folded open on the ground or hung from the side of the vehicle with integrated gutter hooks. Pockets and hook-and-loop straps hold anchor plates, pulleys for mechanical advantage systems, brake rack for lowering, load release straps, Prusik cords, and carabiners. A quick release strap down the center holds an XL Edge Pad, which also protects the hardware when closing the bag. A back compartment secures Ultra-Pro™ Edge Protectors. Contents sold separately.

CMC Rescue Quick Response Bag, Red

CMC Rescue Quick Response Bag, Red

199.99 USD

Whether you are responding to a rescue incident, carrying your personal gear from home to the station, or gearing up for a day of rope access work, the Quick Response Bag will hold your harness, helmet, gloves, goggles, radio, and hardware. Refined with design input from CMC Rescue School instructors, this bag has seven pockets to organize and protect your gear. The large center pocket measures 13 x 8 x 12 inches (33 x 20 x30 cm) and the clipboard-sized side pocket has an organizer for pens,pager, Smart phone, and other small items. Store your helmet, gloves, and goggles in the large end pocket. Manufactured of the same tough 1,000-denier CORDURA® nylon we use for our Rope Bags, the Quick Response Bag includes attachment points for a key ring or shoulder strap(sold separately). This bag will soon become your favorite for travel as well.

CMC Rescue Rope Rescue System-Pac Kit

CMC Rescue Rope Rescue System-Pac Kit

1995.99 USD

Everything but the rope to fully outfit the Rope Rescue System-Pac for a complete systems package, this kit includes the gear to rig a main line lowering or raising system, mechanical advantage, and a separate belay system. The Ultra-Pro Edge Protector provides edge protection and acts as the internal frame for the System-Pac when it’s fully loaded.

Features:

  • System-Pac
  • Edge Pad
  • FastLink Anchor Strap (2)
  • Long Prusik Loop
  • Anchor Plate
  • Load Release Strap (2)
  • ProSeries Screw-Lock (11)
  • 1" Web - 40' (2x20')
  • UltraPro 4 Edge Protector
  • Anchor Strap Sleeve (2)
  • Short Red Prusik Loop (5)
  • ProSeries Pulley (5)
  • ProTech Oval
  • Rescue Rack

CMC Rescue Tactical Personal Rappel Kit

CMC Rescue Tactical Personal Rappel Kit

729.99 USD

Tactical equipment must be lightweight, durable and low profile. Our Tactical Personal Rappel Kit is all three. It provides everything needed for rappel access or escape for one tactical officer, including our exclusive Stealth Rope Bag, designed to be worn securely on the lower let for quick, easy access. The kit's storage bag and equipment are black to reduce visibility.

Products included:

  • Personal Gear Bag
  • Stealth Rope Bag
  • Tactical Rappel Harness
  • Variable Anchor Strap
  • Edge Guard - Large
  • ProTech Screw-Lock (4)
  • ProTech Manual-Lock
  • Delta Quick Link
  • 8 Link with Rappel 8
  • 3/8" Rescue Lifeline - 75'
  • 7mm Prusik Cord - 5'
  • 1" Web - 20' (1x20')

CMC Rescue SRT THROWLINE, 9.5MM, 200 FT.

CMC Rescue SRT THROWLINE, 9.5MM, 200 FT.

181.99 USD

Developed for swiftwater rescue technicians needing the versatility of athrowline with a larger diameter for a better grip, the SRT Throwlineis supple enough to fit into a compactthrow bag, but has extra strength and is easy to grip when settingtension diagonals or boat lines. The polypropylene core and protectivenylon sheath combination produces a strong, supple, highly visible riverrescue rope that floats. Available by the foot or 1,200-ft. spool.

Throwlines: A Safe Choice
A throwline bag is the safest way to reach a subject in fast-moving orstill water. It provides a downstream safetybackup when rescuers must enter the water. Throwbags should be kept inpatrol cars, ambulances, and other emergency response vehicles.

CMC Rescue ProTech, Sand

CMC Rescue ProTech, Sand

52.99 USD

Ideal for mountain rescue, swift water, ski patrol, tower work or other technical uses, where equipment weight is a significant consideration, these lightweight, full-strength Prusik-minding pulleys feature extremely low-profile stainless steel hardware to reduce snagging on rocks,roots, and uneven surfaces. By machining the side plates, the thickness of the metal can be optimized to maximize the strength-to-weight ratio, a process that cannot be done with the traditional bent metal side plates. The unique axle assembly delivers a smooth side plate and impressive strength. The aluminum sheave is mounted on sealed ball bearings for high efficiency. Ideal for small block-and-tackle kits.

Note: Not compatible with 1/2-in. (12.5-mm) or larger ropes.

CMC Rescue Redi-line Throwline, 11mm

CMC Rescue Redi-line Throwline, 11mm

80.99 USD

An excellent choice for shore-based responders, this cost-effective polypropylene line features hollow-braid construction, which makes it easy to handle and stuff into throw bags. Its red/white stripe is highly visible in or out of the water. With life-safety equipment this reasonably priced, you can afford to have a throwline in every patrol car, municipal truck, or fire apparatus. Available by the foot or 1,500-ft. spool.

Throwlines: A Safe Choice

A throwline bag is the safest way to reach a subject in fast-moving or still water. It provides a downstream safety backup when rescuers must enter the water. Throw bags should be kept in patrol cars, ambulances, and other emergency response vehicles.

On-Stage Stands GS7362B Standard Single A-Frame Guitar Stand

On-Stage Stands GS7362B Standard Single A-Frame Guitar Stand

31.54 USD

On-Stage Stands GS7362B Standard Single A-Frame Guitar StandA classic, sturdy A-frame that can hold one guitar, either an acoustic or electric. Features heavy-duty 1 x 1/2" tubing, velveteen rubber, and a "uni-construction" design, which means that there are no parts to lose. The tilt back design, splayed footprint, and rubber end caps guarantee stability.Applications: Single Guitar StandPadding: Velveteen RubberTubing: 1 x " SquareColor: Black Powder Coat Finish Features • Sturdy A-frame that can hold one guitar • Holds acoustic and electric guitars • Heavy-duty 1 x " tubing • Velveteen rubber padding won't damage your guitar • 10-degree tilt back angle and splayed foot print make for a stable foundation • Non-slip rubber end caps

CMC Rescue Rescue Harness, Black

CMC Rescue Rescue Harness, Black

192.99 USD

UL Classified to NFPA 1983 - Class II

Designed for Rope Rescue and Rappelling

Back in 1983 we designed our Rescue Harness to meet the needs of search and rescue better than a recreational climbing harness. The D-ring attachment point made connecting carabiners easy even when hanging in the harness. Extra wide waist and leg loops created more of a “work platform” than the slim profile of a climbing harness. Today’s harness has waist and leg pads with breathable D3 cloth for greater comfort, a rear waist D-ring for travel restraint, and gear loops on each side.With more than a quarter-century of use-inspired evolution, our Rescue Harness continues to set the standard for superb comfort and performance.

CMC Rescue Rope Bags, #3, Yellow

CMC Rescue Rope Bags, #3, Yellow

71.99 USD

Made from Extra Long-Life CORDURA® Nylon for Bags that Last, and Last

Solid performers for years, our popular Rope Bags feature a variety of innovative elements. Contoured backpack-style shoulder straps offer greater comfort when carrying a heavy bag. Bag tops are made of rugged pack cloth for easier closing. Handles, just inside the top, can be used to hold the bag open for quicker stuffing or to carry the bag from the top, haul-bag style. A soft rubber side-carrying handle is comfortable on the hand. The bottom of the bag has a large grommet to pass the rope through, plus sewn web loops to tie the rope end off inside or outside of the bag. The #1 Rope Bag is all CORDURA® nylon and features an external web handle.

PUR 3 Stage Faucet Filter

PUR 3 Stage Faucet Filter

41.99 USD

The PUR FM-3400 faucet filter is a 2 stage water filtration system that removes 99.99% microbial cysts, cryptosporidium, and giardia. The faucet water filter system has an automated filter life indicator to inform you when to change the filter. The filter lasts up to 100 gallons or approximately 2 to 3 months. The faucet filtration system allows you to switch between filtered and unfiltered water. The swivel spray feature allows you to adjust the water where you need it. The faucet filter has an added layer to trap sediment and an improved activated carbon filter. The replacement filter for this PUR FM-3400 faucet filter system is the PUR RF-9999 (1072398700544) faucet filter. Includes one 3 stage water filter replacement.

CMC Rescue Water Rescue Kit - Shore Based

CMC Rescue Water Rescue Kit - Shore Based

522.99 USD

This package has the basic personal protective equipment needed to respond to a water rescue incident or work within 15 ft. of moving water. The rescuer should add a dry suit or wet suit as appropriate for thermal protection. The included throw line bag allows assignment as a downstream safety.

Kit Contents:

  • Mesh Duffel Bag - Small
  • NRS Big Water V
  • Cascade Swiftwater Helmet
  • McNett Saturna
  • NRS Gloves
  • Emergency Strobe
  • Fox 40 Whistle
  • EZ-Stuff Bag Set with NFPA Throwline
* Please specify helmet, glove, and boot size when you order. See individual product listing for size details.

CMC Rescue Flash Hook

CMC Rescue Flash Hook

107.99 USD

UL Classified to NFPA 1983 – Light Use Patented

Our Flash Hook escape anchor is the lightest certified model available today, delivering outstanding strength with minimal weight. The advantage of the patented shape is that it provides a more secure attachment around structural lumber and over window ledges by directing the spine toward flat surfaces when loaded. The slotted handle allows for girth hitching around large ranch or points. This escape anchor is made from a high-strength aluminum alloy with an anodized finish. The captive eye provides greater anchoring versatility and the 10-mm attachment hole accepts most cord or web, making our Flash Hook the best choice for personal escape.

Thailand Journey Stage Kit

Thailand Journey Stage Kit

635.24 USD

Enjoy the view from your longtail boat with our Thailand Journey Stage Kit This kit includes a personalized sign along with other cardboard props to turn your party or VBS celebration into a Thailand adventure The Thailand Journey Stage Kit includes 1 - Thailand Journey Right Facing Elephant Silhouette 1 - Thailand Journey Left Facing Elephant Silhouette 1 - Thailand Journey 3D Longtail Boat Prop 1 - Thailand Journey Personalized Hanging Sign 4 - Bonsai Tree Standees The background and flooring was created using the following items not included in the kit White Gossamer 12 Paper Lanterns Metallic Dark Blue Background Material Ivory Gossamer Silk Fern Dried Moss Metallic Iridescent Shred

CMC Rescue Anchor Plate, Stainless Steel

CMC Rescue Anchor Plate, Stainless Steel

226.99 USD

UL Classified to NFPA 1983 - General Use

Designed by firefighters, our Roof Anchor quickly provides a secure anchor point for roof operations. Set the anchor on the roof and hammer the 1/2-inch (12.7 mm) diameter spike into the surface. When not in use, the spike folds into the handle for safe storage and transport. The Roof Anchor’s working strength will depend on the structural integrity of the surface, including any damage caused by the spike. Because of the highly variable strength of roof materials and difficulty in assessing this strength accurately, the use of a second Roof Anchor or multiple units should be standard protocol.

CMC Rescue Water Rescue Kit - Rescue Swimmer

CMC Rescue Water Rescue Kit - Rescue Swimmer

803.99 USD

This package has the basic personal protective equipment needed by anyone responding to a water rescue incident as a rescue swimmer.Appropriate thermal protection such as a dry suit or wet suit should be added.

Kit Contents:

  • Water Rescue Gear Bag
  • Rapid Rescuer PFD
  • Shredder SAR Fins
  • Cascade Swiftwater Helmet
  • NRS Boots
  • NRS Gloves
  • McNett Saturna
  • Emergency Strobe
  • Fox 40 Whistle
  • Water Rescue Tether
* Please specify helmet, glove, and boot size when you order. See individual product listing for size details.

CMC Rescue ProSeries Single Pulley, Red

CMC Rescue ProSeries Single Pulley, Red

129.99 USD

UL Classified to NFPA 1983 - General Use
Basic building blocks of most rescue systems

No detail has been overlooked in these high-efficiency pulleys. These compound or complex system workhorses feature precision sealed ball bearings to minimize loss of mechanical advantage. The large carabiner hole supports multiple carabiners, and the smooth, rounded edges on the high-strength aluminum side plates minimize rope fraying. The bottom is shaped for maximum efficiency with Prusik hitches but also works well with Gibbs-type ascenders. Large anodized aluminum sheaves provide efficiency, and low-profile axle fasteners reduce snags when the pulley is moving.

CMC Rescue Anchor Strap Sleeve, Large, Black

CMC Rescue Anchor Strap Sleeve, Large, Black

38.99 USD

Anchor Strap Sleeve, Black

Made from tough #4 duck canvas and a layer of Shelter-Rite™vinyl, our Anchor Strap Sleeves protect anchor straps from the elements and surface abrasion, reducing wear and tear and increasing safety and service life.The pull string installation feature provides simplicity for feeding straps through the sleeve during initial strap installation and for regular inspections. Available in four sizes. (XL Anchor Strap Sleeve is for use on both our XL and XXL Anchor Straps).

  • Anchor Strap not included.
  • Color:  Black
  • Sizes:  Small - X-Large
  • Made in USA

CMC Rescue Ultra-Pro Edge Protector

CMC Rescue Ultra-Pro Edge Protector

90.99 USD

The most sought-after edge protection available features super slick,high-performance material that not only protects your rope from sharp or rough edges, but also greatly reduces friction. The Ultra-Pro is lighter and easier to transport than edge rollers or similar devices and its lower profile avoids tipping often encountered with taller devices. It conforms to the edge, and prevents sharp bends in the rope. Protectors are available in two sizes: the Ultra-Pro 2 is for two ropes, and the Ultra-Pro 4 accepts four ropes. Carabiner holes in all four corners allow the Ultra-Pro to be tied off for safety or linked together for extended protection.

Stage Curtain Candy Bars

Stage Curtain Candy Bars

0.87 USD

Our personalized Stage Curtain Candy Bars feature an elegantly draped red stage curtain design printed with your custom wording Choose your Stage Curtain Candy Bars in one of our four pure chocolate flavors - milk chocolate dark chocolate milk chocolate crisp or dark chocolate mint Each personalized candy bar measures 5 14 long x 2 wide and is a great addition to any Hollywood themed favor bag Would you rather have a white chocolate bar or maybe one with almonds Thats not a problem select our Stage Curtain Candy Bar Wrappers Well supply you with these exclusively designed candy bar wrappers you supply the chocolate

CMC Rescue Rescue Pulley, Single, Burgundy

CMC Rescue Rescue Pulley, Single, Burgundy

57.99 USD

UL Classified to NFPA 1983 - General Use

This lightweight, full-strength, Prusik-minding pulley is ideal for mountain rescue, swift water, or other technical teams where equipment weight is a significant consideration. By machining the side plates, the thickness of the metal can be varied to maximize the strength-to-weight ratio, a process that cannot be done with traditional bent metal side plates. Sealed ball bearings provide high efficiency and aluminum side plates protect the rope. An extremely low-profile stainless steel axle assembly reduces snagging on rocks, roots, and uneven surfaces.

CMC Rescue CSR Single Pulley, Red/Gold/Blue

CMC Rescue CSR Single Pulley, Red/Gold/Blue

468.99 USD

  • UL Classified to NFPA 1983 - General Use
  • Patented
  • Designed for 1/2-inch Life Safety Rope
Ideal for industrial applications as well as many rescue operations, the CSR Pulley also uses our proprietary locking system that eliminates a toothed cam or Prusik, so it can be released while under load. Its integral swivel reduces torque by aligning the pulley with the load, thereby increasing efficiency and safety. Optimized for 1/2-in. (12.5-mm) rope, the CSR Pulley has high-strength aluminum side plates, sealed ball bearings, and anodized aluminum sheaves.

CMC Rescue System-Pac, Orange

CMC Rescue System-Pac, Orange

212.99 USD

The System-Pac attaches to a #2 or #3 Rope Bag and is the only pack that carries a ready-to-deploy rescue system.

  • System-Pac stores hardware already set up for the system and attached to a CMC Rescue Anchor Plate
  • Back pocket not only holds an Ultra-Pro 4 Edge Protector, but uses the edge protector as a stiffener, making the pack easier to carry when loaded
  • Internal gear loops for attaching extra hardware
  • External pockets for web and Prusik cord
  • Padded shoulder straps and waist belt
  • Color: Orange
  • Weight: 1 lb, 10 oz.