RJ45 BNC Network Cable Tester - PrimeCablesÂ® Compatible Devices Operation Instructions: â€¢ Connect one plug of cable to Main Unit, and the other plug to Remote Unit.â€¢ Choose "OFF", "ON" or "S" to test the cable. "OFF" means Power of "ON" means normal speed "S" means Slow Speedâ€¢ To read the test results from the LED indications. Multifunctional Network Cable TesterÂ (1). Functions:Â 1. Can test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8andG, meanwhileÂ Can judge wrong connection, short circuit and open circuit.Â 2. NS-4688tests BNC, RJH and RJ45; NS-468 tests RJ 11and RJ45; NS-468N tests RJ45Â And BNC, ST-248 tests RJ45 and BNC.Â (2). Test of double-twisted cables; Switch on the power. (s is slow and remoteÂ Tester. The lights of the main tester will turn on.Â Sequently from 1 to G.Â Main tester: 1-2-3-4-5-6-7-8-GÂ Remote tester: 1-4-3-2-5-6-7-8-GÂ Following are abnormal connections:Â 1. If one cable, for example cable NO. 3is open circuited, the two NO. 3lights ofÂ The main tseter and remote tester will not turn on.Â 2. If several cables are not connected, several lights will not turn on respectively. If less thanÂ Two cables are conntected, none of the lights is on.Â 3. If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:Â Main tester: 1-2-3-4-5-6-7-8-GÂ Remote tester: 1-4-3-2-5-6-7-8-GÂ 4. If two cables are short circuited, neither of the corresponding lights ison of the remoteÂ Tester while main tester remains unchanged. If three cables, including three, are shortÂ Circuited, none of the corresponding liaghts is on.Â (3). If test patch panels or wall plate outlels, two cables which can match each other(eg110Â P4 and RJ45)will be connected to the tester.Â (4). If test cables of the same axes, BNC turns on when the cable works.
Automatic discharge of the circuit after testing, audible and visual warning if the test probes are applied to a live circuit, and a test inhibit feature which operates automatically under live circuit conditions. The units also conform fully to IEC 61010-1 for use in Category III 600V applications, and provide all of the facilities needed to meet insulation testing requirements relating to the current edition of the IEE Wiring Regulations. In line with other products in the contractor range, MIT300 insulation testers feature rugged construction, with an impact-resistant rubber-overmoulded case, and innovative circuitry which guarantees high accuracy combined with stability of calibration. Both provide indication of insulation resistance up to 999M ohms, 200mA continuity testing, a fast-reacting continuity buzzer, and facilities for nulling the resistance of the test leads. The entry-level MIT300 offers insulation test voltages of 250V and 500V, the MIT310 allows testing at 250V, 500V and 1,000V. In addition to the basic features, the mid-range MIT310 adds a default voltmeter function. The MIT310, incorporates a dual solid-state displays which simultaneously show the test results numerically, and in the form of a moving-arc bar graph that accurately simulates the operation of an analogue meter. Both come complete with a full calibration certificate.
The New Generation of NC axis gauging equipment, for quick, accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC or DRO and also for EDM/spark erosion tools - the stylus is electrically insulated from the spindle. Universal - one tool measures length, height, diameter and centre. The synchronous single needle allows greater needle displacement before reaching '12 o'clock'. A positive reading is given regardless of direction of axis movement. No calculations and no 'trial and error' involved. Increases production and efficiency, reduces job time and operator requirement. The stylus is designed to break on a 'nominal fracture' before the workpiece or tester can be damaged. Three plug in styli types can be changed in seconds without the use of special tools. Pre-adjusted to a concentricity of 0.01mm maximum.Indicator diameter: 50mm.Clamping shank diameter: 16mm.a. Measuring lengthb. Measuring heightc. Establishing true centre and diameter of bores.Insert stylus roughly in centre of bore, measure distance A and divide by 2 (P). Measure distance B in Y direction, across point P and divide by 2.Result: true centre point (M). Repeat measuring of distance A.
SpecificationsMfr Part Number: TC-NT2,Power Requirement: One DC 9V battery,Tone Frequency: 600 ~ 800 Hz.,Dimensions (appr.): Master Unit: 115 x 68 x 27 mm (4.5 x 2.7 x 1.1 inch),Remote Terminator: 118 x 32 x 27 mm (4.6 x 1.3 x 1.1 inch),Weight (appr.): Master Unit: 113 gram (4 Oz.) (without battery),Remote Terminator: 57 gram (2 Oz.),Tests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables,Tests USB and IEEE 1394 cables with optional adapters,Built-in Tone Generator for tracing cable with standard Tone Probe,Tests the grounding on shielded (screened) cable,Verifies cable continuity, opens, shorts, and miswires,Tests cable upto 300 meters,Auto-Scan or Manual-Scan mode,Includes Deluxe Carrying Pouch, two RJ45-to-BNC Adapters, and RJ45 Patch Cable
THM150This multimeter is ideal for temperature, humidity and dew point testing in residential and commercial environments such as offices, storeroom's, greenhouses and places where a controlled environment is essential. Conforms with EN61326-6: 2006 and EN61326-2-2: 2006. Meter capabilities: â€¢ Testing temperature: -10 ~ 50Â°C (14 to 122Â°F). â€¢ Testing humidity: 0 ~ 100%RH. â€¢ 4 digit clear LCD display with optional back light.â€¢ Data hold function. â€¢ Auto power 'OFF' and low power indicator. â€¢ Battery operated - DC1.5V 3x AAA (included). Functions: Data hold, LCD display with optional backlight and Auto power-off.Pack includes: Meter, head cover, wrist strap, carry case, DC1.5V x 3 AAA batteries(installed). Instruction manual.Dimensions (W x D x H): 60 x 30 x 121mm.Gross weight: 140g.
Model 150RFor testing the hardness of hard alloys, quenched and unquenched steels, using steel ball or diamond penetrators to measure Rockwell A, B & C units of measurement. Supplied with test block, flat large, small and V notch anvils, steel ball bearing indentor and diamond Indentor. Manufactured in accordance with ISO 6508-2:1999 & ASTME18.Measuring ranges: 20-88HRA (Test force: 588.4N/60kgf), 20-100HRB (Test force: 980.7N/100kgf), 20-70HRC (Test force: 1471N/150kgf). Max height of test piece: 80mm with screw protective jacket, 170mm without. Depth of throat: 135mm. Dimensions: 466 x 238 x 630mm.
PowerDsine PD-Tester PoE Tester Color: White Specifications: Test Services: Tests RJ-45 outlet for power Indicates the type of power source, including: IEEE 802.3af midspans and switches Cisco pre-standard in-line switches High Power midspans Compact design specifically tailored for system integrators and installers Interfaces/Ports Ports: 1 x RJ-45 Female Network Connectivity Media: Category 5 STP Category 6 STP Status Indicators: Midspan LED Display (Blue) Endspan LED Display (Blue) Parts: 1 year limited Labor: 1 year limited
Features backlit LED ladder, voltage & polarity, single pole test for phase detection, audible & visual continuity test, rotary field indicator, switchable load (30mA with buttons pressed), vibrates under load, torch, digital backlit display with display hold, resistance measurement to 2k Ohm.Voltage AC/DC: 6V - 690VIP Rating: IP65Safety Certification: CATIV 600V, CATIII 690V
Easy and accurate OpenJaw current measurementContinuity beeperCompact design with neat probe storageAuto off mode to conserve battery lifeAC Voltage: 100VDC voltage: 1000VAC./DC current 100AResistance: 1000WCalibration Frequency:45 to 66 HzDigital Display Count 1000Safety Category: 1000V CAT IIIWeight: 300gSize: (H x W x D)230 x 51 x 30.5mm
DC/AC Clamp Meter Multimeter (True RMS, Continuity + Diode Test, Auto Range) Selling Unit: Each Type: Multifunction Testers Size/Dimensions: 225x70x28mm AC Voltage: 4/40/400V+/-1.0%, 700V+/-1.2% DC Voltage: 4/40/400V +/- 0.8%, 1000V +/-1.0% Analog/Digital: Digital Color/Finish: Black & Yellow Maximum Input Current: 1000A
Features backlit LED ladder, voltage & polarity, single pole test for phase detection, audible & visual continuity test, rotary field indicator, switchable load (30mA with buttons pressed), vibrates under load, torch.Voltage AC/DC: 12V - 690VIP Rating: IP65Safety Certification: CATIV 600V, CATIII 690V
Super sharp tempered steel probe circuit continuity tester to test through wire when power is switched off. Locates broken circuits in fuses, switches, sockets and wires. Tester is fitted with a 1.1m lead and a strong transparent plastic handle. Requires one AA battery (supplied separately.)
The SaltDip is a portable, digital water chemistry reader that is fast, accurate, and affordable. Simply collect a water sample using the onboard cup and quickly test the Salt Level, TDS, and Temperature of your pool or spa water. Reads in seconds with no colors to match!
For use in the graphic arts, engraving and industrial inspection needs. Black lacquered brass with 2 lenses that reduces distortion and give clear, sharp definition. Folds flat for easy carrying.The Linen Tester has a 1 in. x 1 in. viewing area and magnifies 6X.
Telephone Phone Butt Test Tester Lineman Tool Cable Set Connectors Joiner Size: N/A Specification: Color: Gray Item size: 147*46*28mm Net weight: 117g Package weight: 137g Package Content: 1 x Telephone tester 2 x Connector cable 1 x Joiner 1 x User manual
Pyle PHCT45 Network Cable Tester Specifications: Made to crimp RJ45 plugs All-steel handles with padding Checks RJ45 and BNC network cables Checks up to four pairs of conductors for continuity and correct polarity Dimensions: 4.4" x 3.8" x 1"
TS-6004mm detachable probes, instruction sheet, continuity beeper, rugged enough to withstand 30m (10ft) drop. Features include continuity and auto power off.Voltage max: 600V, 600V DC.Current max: 100A.Resistance max: 1000W.Safety rating: Cat III.
Tripp Lite Network Cable Continuity Tester for Cat5/Cat6, Phone and Coax Cable Assemblies (N044-000-R) Specifications: Connector A: RJ45 (FEMALE) Connector B: RJ11 (FEMALE) Number of Connectors: 5 Electrical Outlet Plug Type: Consumer Electronics
Suitable for use with Ethylene Glycol or Methanol type anti-freezes. Shows lowest temperature at which the cooling system is protected against freezing. Tough glass tube construction with an easy to read scale. For use on hot or cold engines.
Pyle - Network Cable Tester for Testing UTP, STP, BNC Coaxial, Telephone Continuity, Short Circuit, Open Connection, Length Test & Test Leads Included Parts: 1 year Labor: 1 year Electrical Outlet Plug Type: Network Testing Device
Tests 6, 12 and 24 volt batteries. Tough glass tube construction with colour coded float for easy reading which indicates the state of charge in each cell. Displays the specific gravity with a scale range of 1.100 to 1.300.
MW333A versatile battery checker for testing more than 12 types of batteries including AAA, AA, C, D, 9V, CR123A, CR2, CR-V3, 2CR5, CR-P2, button cells or other batteries with the same voltage. N.B. batteries not included.
Features backlit LED ladder, voltage & polarity, single pole test for phase detection, audible & visual continuity test.Voltage AC/DC: 12V - 690VIP Rating: IP54Safety Certification: CATIII 600V, CATII 690V
Network Cable Tester W/ UTP, FTP, BNC Coaxial, Telephone Continuity, Short Circuit, Open Connection & Test Leads Included Parts: 1 year Labor: 1 year Electrical Outlet Plug Type: Network Testing Device
For AAA (LR3), AA (LR6), C (LR14), D (LR20), E-block (9V) and button cell batteries, blister packed, Assembled and TestedDimensions: Unit width: 2.95Unit height: 4.33Unit depth: 0.98Unit weight: 1.4991
For testing the charge state of lead acid batteries by measuring the specific gravity of battery acid. Simple to use hydrometer type instrument with glass tube and float, rubber syphon and probe.
Il tester di alimentazione ¨¨ una tensione robusta, tester per PC-alimentatore.
ATX, BTX e ITX compliant, alimentatori possono essere testati.Indicare lo stato di tensione.
Provides a temporary continuity to earth. 2-way, double braid with secondary insulation for connections to metallic Cable Armour or Sheathing.Cable length: 7.5m.
Durable polycarbonate handle with internal bulb, steel contact probe and 1.5m heavy duty rubber insulated lead fitted with sheathed crocodile clip.
Insten 1848024 PC ATX SATA Power Supply Tester+RJ45 Phone Cable Tester Features: Insten PC ATX SATA Power Supply Tester+RJ45 Phone Cable Tester
Aimometer M320 Pocket-size Digital Multimeter for Easy Taking Multimete/Continuity Buzzer Pens and Multimeter Connect Analog/Digital: Digital
Aimometer M300 Pocket-size Digital Multimeter for Easy Taking Multimete/Continuity Buzzer Pens and Multimeter Connect Analog/Digital: Digital
Met behulp van digitale adem alcohol tester is een eenvoudige metthod analyse alcoholgehalte in het bloed op elk moment en overal.
Deze digitale adem alcohol tester is een eenvoudige methode om iemands alcoholgehalte in het bloed altijd en overal te analyseren.
Questo portachiavi in ??grado di distinguere il livello di intensit¨¤ UV e cambiare il colore a seconda dell'intensit¨¤ UV.
2014 Mini High Quality Digital Display USB Voltage Current Meter Tester Charger Doctor For Power Bank Phone Mobile B12 SV003361
High Quality!Mini Digital Display USB Voltage Current Meter Tester Charger Doctor For Power Bank Phone Mobile Cell B12 SV003363
2014 Mini Style Digital Display USB Voltage Current Meter Tester Charger Doctor For Power Bank Phone Mobile Cell B12 SV003363
UNI-TÂ® UNI-T UT15C Multi-function Waterproof Type Voltage Tester LED LCD Display Continuity Detector Pen Meters Tester BI183
XCSOURCEÂ® 5E 6E SC8108 Multifunction Network LAN Phone Cable Tester Meter Cat5 RJ45 Mapper 1pcs Far End Test Tools BI203
Deze sleutelhanger kan het niveau van de UV-intensiteit te onderscheiden en verander de kleur volgens de UV-intensiteit.
Cable Tester Tracker Phone Line Network Finder RJ11 RJ45 Wire Tracer FF Type: Environmental & Mechanical Color: As shown
TRENDnet TC-NT2 Cable Tester Package Contents: 99164H Parts: 1 Year Labor: 1 Year Electrical Outlet Plug Type: others
MS8212A Pen Digital Multimeter Voltage Current Diode Continuity Tester Selling Unit: Each Analog/Digital: Digital
XCSOURCEÂ® 4-in-1 Remote RJ11 RJ45 USB BNC LAN Network Phone Cable Tester Multifunction Meter Power Tools BI204
The Stant 12270 tester allows you to test todays cars higher pressure cooling systems and pressure caps...
This adapter is for use with Cat. Nos. 33770 33900 33950 33980 36100 36150 36200 36250 37450 and 37600....
OEM Technology at a Toolbox Price Accurate battery test decision in seconds. - No user interpretation...
Works on ignition systems from high energy electronic to small engines. Tests for no start conditions...
Peek Peek Temporary Continuity Connector 2-Way 2M Span Hand Tools > Electrical > Continuity Bonds