Vidgrids » fluke cable tester

fluke cable tester

Quick Rj-45 Network Cable Tester

Quick Rj-45 Network Cable Tester

36.64 USD

Monoprice 8130 - Quick RJ-45 Network Cable TesterWhen a LAN connection fails, you can swap out the cable to see if it is the problem or you can reach for the Monoprice LAN Quicker 009!This cable tester is designed to troubleshoot RJ45 LAN cables, both UTP and STP. It not only tells you if the cable passes or fails the test, it indicates which pins fail and whether they are open, shorted, or crossed. This allows you to easily see if the cable is your problem and what you need to do to fix it, if it is.The tester has two basic testing modes: Auto and Step.In auto mode it makes a single pass over the cable and gives a result. It shows whether the cable passed or failed and, if it failed, the type of failure (open, short, or cross) and the affected pins/wires.In step mode the tester steps through each wire independently with each press of the Test button. This allows you to get detailed results for a cable that may have multiple types of failures. For example, you can see that pin 1 is open, pins 2 and 3 are crossed, and that pin 4 is shorted.WARNING!!! Do not test live circuits as it could cause damage to the tester unit or personal injury. Note: This product has a universal card packaging that is used for PIDs 8129, 8130, and 8131, with the individual model marked on the back. The front of the packaging includes functionality tags for all three testers combined. Therefore, the packaging erroneously indicates that this tester is capable of testing HDMI, Coax, and RJ12 cables, which it is not designed to do. For HDMI cable testing, please use PID 8131 (not included). For Coax and RJ11/12 testing, use PID 8129 (not included). Also note that the manual for this tester shows test results for RJ12, Coax, and USB cables. While it is electrically capable testing these types of cables, the necessary connectors or adapters are not included with the tester.

113 Fluke True Rms Multimeter

113 Fluke True Rms Multimeter

128.4 GBP

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that's easier to view, this meter is a must have for every toolbox.Voltage: Range: 6V to 600VResolution : 0.001V to 0.1VAccuracy: DC, 45 to 500 Hz:2.0 % + 3500 Hz to 1 kHz: 4.0 % + 3Diode test 4 Range 2.000 VResolution 0.001 VAccuracy 2.0 % + 3Continuity4 Accuracy Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longerΩ4 Range600.0 Ω6.000 kΩ60.00 kΩResolution 0.1 Ω0.001 kΩ0.01 kΩAccuracy 0.9 % + 20.9 % + 10.9 % + 1Capacitance4 Range: 1000 nF to 9999 μFResolution: 1 nF to 1 μFAccuracy:1.9 % + 2100 μF - 1000 μF: 1.9 % + 2> 1000 μF: 5 % + 20Notes:1 All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other True-RMS meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.2 Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.3 Minimum measureable input in VCHEK autorange is 3 V dc. For measurements below 3 V dc, push Range button twice to get to 6 V dc manual range.4 After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.

RJ45 BNC Network Cable Tester - PrimeCables

RJ45 BNC Network Cable Tester - PrimeCables

13.0 USD

RJ45 BNC Network Cable Tester - PrimeCables® Compatible Devices Operation Instructions: • Connect one plug of cable to Main Unit, and the other plug to Remote Unit.• Choose "OFF", "ON" or "S" to test the cable. "OFF" means Power of "ON" means normal speed "S" means Slow Speed• To read the test results from the LED indications. Multifunctional Network Cable Tester (1). Functions: 1. Can test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8andG, meanwhile Can judge wrong connection, short circuit and open circuit. 2. NS-4688tests BNC, RJH and RJ45; NS-468 tests RJ 11and RJ45; NS-468N tests RJ45 And BNC, ST-248 tests RJ45 and BNC. (2). Test of double-twisted cables; Switch on the power. (s is slow and remote Tester. The lights of the main tester will turn on. Sequently from 1 to G. Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-4-3-2-5-6-7-8-G Following are abnormal connections: 1. If one cable, for example cable NO. 3is open circuited, the two NO. 3lights of The main tseter and remote tester will not turn on. 2. If several cables are not connected, several lights will not turn on respectively. If less than Two cables are conntected, none of the lights is on. 3. If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8-G Remote tester: 1-4-3-2-5-6-7-8-G 4. If two cables are short circuited, neither of the corresponding lights ison of the remote Tester while main tester remains unchanged. If three cables, including three, are short Circuited, none of the corresponding liaghts is on. (3). If test patch panels or wall plate outlels, two cables which can match each other(eg110 P4 and RJ45)will be connected to the tester. (4). If test cables of the same axes, BNC turns on when the cable works.

Pro'Skit Mt-8100 Telephone Butt Set Cable Tester Kit

Pro'Skit Mt-8100 Telephone Butt Set Cable Tester Kit

206.11 USD

Pro'sKit MT-8100 Telephone Butt Set Cable Tester KitThe Pro?s Kit MT-8100 Butt Set comes with all the functions you need to be more productive in the field. The Eclipse Telephone Butt Cable Tester Kit is approved by IEC/EN 60529 IP54 for waterproof and dustproof test, and features the latest improvements to drop protection reliability. The Eclipse MT-8100 is a smart operation unit used by installer, repair technicians and other authorized personnel to test copper wire voice subscriber lines. The Eclipse Cable Tester Kit not only provides talk and monitor function, but also features line voltage test, continuity test, two-way hands-free amplified speakerphone, speed dialing, low battery indicator and a rugged re-locatable locking belt clip.Product Features: Complied with IP54 Dustproof & Waterproof tests Drop Protection CE approved High impedance monitor Outer-lead voltage LED indicators On/off checking feature checks out if telecom line is connected well. Continuous polarity LED indicators. Speakerphone for convenient hands-free two-way conversation Tone and pulse operation Store up to twelve 16-digit numbers in repeat dialer (speed dialing), plus extra number store in M1 button. Last number redial feature. PBX pause button. Mute switch Electronic switch controls the volume of the speakerphone/monitor. Automatic shut-off feature turns off speaker after five minutes of inactivity Battery low-voltage LED indictors Audible electronic ringer Relocatable steel locking belt clip Angled Bed of Nails allows it stab into the cable, and the auxiliary RJ-11Modular plug can be inserted directly into telecom jack.

Fluke Tpak Toolpak Kit

Fluke Tpak Toolpak Kit

38.4 GBP

Fluke 1507/1503 Insulation Resistance TestersSave both time and money with automatic calculation of polarisation index and dielectric absorption ratio (only available on the1507). Make repetitive tests simple and easy with the 1507's compare (pass/fail) function (only available on the 1507). Repetitive or hard-to-reach testing is easy with the remote test probe. Live circuit detection prevents insulation test if voltage > 30V is detected for added user protection. Auto-discharge of capacitive voltage for added user protection. AC/DC voltage: 0.1 V to 600V. 200mA continuity. Features:Insulation test range:1507: 0.01 MW to 10 GW1503: 0.1 MW to 2000 MWInsulation test voltages:1507: 50V, 100V, 250V, 500V, 1000V1503: 500V, 1000VResistance: 0.01W to 20.00 kW.Save battery power with auto power off. Read measurements easily with large, backlit display. CAT IV 600V over-voltage category rating for added user protection. Remote probe, test leads, probes and alligator clips included with each tester. Accepts optional Fluke *TPAK magnetic hanging system to free your hands for other work. Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests.

Fluke 62 Max, Ir Thermometer

Fluke 62 Max, Ir Thermometer

69.98 GBP

Designed with on-the-job needs in mind, Fluke 62 MAX and 62 MAX+ infrared thermometers are everything you'd expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance.Specifications:Temperature Range: -30 °C to 500 °C (-22 °F to 932 °F) Accuracy: ±1.5 °C or ±1.5% of reading, whichever is greater -10 °C to 0 °C: ±2.0 -30 °C to -10 °C: ±3.0 Response Time: <500 ms (95% of reading) Spectral Response: 8 to 14 microns Emissivity 0.10 to 1.00 Optical Resolution: 10:1 (calculated at 90% energy) Repeatability of Readings: ±0.8% of reading or <±1.0 °C (2 °F), whichever is greater Battery: AA x1Battery Life: 10 hours with laser and backlight on Physical Specifications:Weight: 255g Size: 175 x 85 x 75mm Operating Temperature: 0°C to 50°C (32°F to 122°F) IP Rating: IP 4 per IEC 60529 EMC: EN 61326-1:2006 EN 61326-2:2006 Compliance: EN/IEC 61010-1: 2001 Laser Safety: FDA and EN 60825-1 Class II

Fluke 373 - 600A Trms Ac Clampmeter

Fluke 373 - 600A Trms Ac Clampmeter

243.6 GBP

The new Fluke 373 clamp meters offers improved performance perfect for many AC only current measurement situations. With true-RMS AC voltage and current measurements, the Fluke 373 reads up to 600A AC and 600V AC or DC.Fluke model number: 373Application: Industrial/Residential/CommercialCable size jaw (& cable size iFlex): 32 mmi-flex flexible current probe included: n/aTrue RMS: YESAC Current (clamp) to: 600AAC Current (i-flex) to: n/aDC Current (clamp) to: n/aAC Voltage to: 600VDC Voltage to: 600VResistance & Continuity: YESFrequency to 400Hz: n/aTemperature measurement -10°C to + 400°C: n/aMotor Start-up (inrush current) capture: n/aDetachable jaw clamp & torch: n/aLow pass filter for noisy environments: n/aRemovable display operates up to 10 metres: n/amV range compatible with other accs: n/aMin/Max logging: n/aDisplay backlight: YESDisplay Hold: YESWarranty (years): 3Safety rating: CAT III 600 V, Cat IV 300 V Note : Cat IV is a higher safety rating

Fluke Networks 10051501 Networks D914 Impact Tool

Fluke Networks 10051501 Networks D914 Impact Tool

4646.0 INR

Fluke Networks 10051501 D914 Impact Tool with EverSharp 110, EverSharp 66 Blade & Free Blade Specifications: The versatile D914â„¢ series impact tools include built-in probe pic/spudger and torque capability. Industry standard, internationally accepted Hook and spudger tools are built into the handle Automatic spring handle --choose low impact for 24/26 gauge wire or high impact for 22-gauge wire D914 and D914S impact tools accept Phillips-head or flat screwdriver blade Convenient blade storage built into the handle Adapter blade allows technician to use a variety of torque tool bits and sockets Easy blade insertion, locks in place D914STM soft touch impact tool features a rubber handle and special ergonomic design for better grip and to reduce hand fatigue Package Contents: D914 Impact Tool EverSharp 110 Blade EverSharp 66 Blade Blade Parts: 1 year limited

TRENDnet TC-NT2 Cable Tester

TRENDnet TC-NT2 Cable Tester

35.99 USD

SpecificationsMfr Part Number: TC-NT2,Power Requirement: One DC 9V battery,Tone Frequency: 600 ~ 800 Hz.,Dimensions (appr.): Master Unit: 115 x 68 x 27 mm (4.5 x 2.7 x 1.1 inch),Remote Terminator: 118 x 32 x 27 mm (4.6 x 1.3 x 1.1 inch),Weight (appr.): Master Unit: 113 gram (4 Oz.) (without battery),Remote Terminator: 57 gram (2 Oz.),Tests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables,Tests USB and IEEE 1394 cables with optional adapters,Built-in Tone Generator for tracing cable with standard Tone Probe,Tests the grounding on shielded (screened) cable,Verifies cable continuity, opens, shorts, and miswires,Tests cable upto 300 meters,Auto-Scan or Manual-Scan mode,Includes Deluxe Carrying Pouch, two RJ45-to-BNC Adapters, and RJ45 Patch Cable

Fluke 971 Temperature Humiditymeter

Fluke 971 Temperature Humiditymeter

237.6 GBP

Temperature and humidity are two important factors in maintaining optimal comfort levels and good indoor air quality. Quickly and conveniently take accurate humidity and temperature readings with the 971. Invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). Specification:Temperature: -20°C to 60°C (-4°F to 140°F)Temperature accuracy 0°C to 45°C (±0.5°C) -20°C to 0°C & 45°C to 60°C (±1.0°C)32°F to 113°F (±1.0°F)-4°F to 32°F & 113°F to 140°F (±2.0°F)Resolution: 0.1°C / 0.1°FTemperature Update Rate: 500 msTemperature Sensor Type: NTCRelative Humidity Range: 5% to 95% RHRelative Humidity Accuracy 10% to 90%RH @ 23 °C (73.4°F) (±2.5%RH)(<10%, > 90%RH @23°C (73.4°F) (±5.0%RH)

Fluke Networks MS2-KIT MicroScanner2 Professional Kit

Fluke Networks MS2-KIT MicroScanner2 Professional Kit

850.0 USD

Fluke Networks MS2-KIT MicroScanner2 Professional Kit Specifications: Includes Accessories: MicroScanner2 Cable Verifier main wiremap adapter remote identifiers #2-7 IntelliTone Pro 200 probe shielded twisted-pair RJ45 patch cord RJ11 patch cord clip-set RJ45 to 8 alligator clip bare wire adapter F Coax push on patch cord accessory soft pouch (2) AA alkaline batteries (1) 9V alkaline battery MicroScanner2 Getting Started Guide MicroScanner2 Owners CD IntelliTone Pro Getting Started Guide MicroScanner2 owners CD IntelliTone Pro Getting Started Guide IntelliTone Pro owners CD packaged in a deluxe Fluke Networks carry case Package Contents: 78526N Parts: 1 year limited Electrical Outlet Plug Type: others

Fluke T3000Fc Wireless Thermometer

Fluke T3000Fc Wireless Thermometer

170.4 GBP

Wireless K-Type thermocouple bead probe for stand-alone use or with the Fluke Connect system. Connect a t3000 to quickly spot temperature differences from a safe distance. Use it with FC current and voltage meters to view all parameters at the same time or log measurements over time to identify trends. Upload saved data to your PC or mobile device. Logs up to 65,000 readings. Supplied with a magnetic hanging strap. Relays measurements wirelessly to the Fluke 3000 FC DMM, Ti200/300/400 infrared cameras, and mobile devices.Temperature measurements: -200°C - 1372°CTemperature Scale CentigradeBattery Type AABest Accuracy ±0.5% + 0.3 °CProbe Type KResolution 0.1 °CWeight 220g

Fluke Networks Pro3000 Network/ PC Service Tools

Fluke Networks Pro3000 Network/ PC Service Tools

59.0 AUD

Fluke Networks Pro3000 Analog Tone Generator Specifications: User interface Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED Solid Frequency 1000 Hz nominal Alternating Frequency 1000/1500 Hz nominal Over Voltage Protection 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode 8 dbm into 600 ohms Output Voltage Level in Continuity Mode 8 Vdc with fresh battery Battery 9V alkaline Temperature Operating: -20° C to 60° C, Storage: -40° C to 70° C Case dimensions 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) Parts: 18 Month

Fluke 177 Multimeter

Fluke 177 Multimeter

296.4 GBP

This is the industry standard, with all the features you need to troubleshoot and repair so many problems in electrical and electronic systems.Fluke 177 Series digital multimeter give you True RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, provide higher 0.09% basic accuracy, a digital display with analogue bar graph and backlit.Voltage DC: 0.1mV - 1000VVoltage AC: 0.1mV - 1000VCurrent DC: 0.01mA - 10A Current AC: 0.01mA - 10AResistance: 0.1 - 50M OhmsCapacitance: 1nF - 100kHzFrequency: 0.01Hz - 100kHzTemperature: 0.1°C -40/400°C

2Ac Fluke Voltalert Detector 200-1000V

2Ac Fluke Voltalert Detector 200-1000V

26.4 GBP

2ACDesigned to be pocket-sized and easy to use. The 2AC tests for energised circuits and defective grounds. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. Voltage detection from 200 to 1000V AC, suitable for a wide range of residential, commercial and industrial needs. Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready. Category IV - 1000V over-voltage rated product for best in class user protection. Integrated clip design, optimised for pocket storage. Powered by 2x AAA batteries (included). Two-year warranty.

Fluke 561 Hvacpro Infrared & Contact Thermometer

Fluke 561 Hvacpro Infrared & Contact Thermometer

181.2 GBP

The 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. It's fast, efficient, and easy to use, saving you valuable time and effort.Temperature Range: -40 to 550 °C (-40 to 1022 ° F) Accuracy: ±1.0 % of reading ±1 % of reading or ±1 °C (±2 °F), whichever is greater below 0 °C/32 °F, ±1 °C (±2 °F) ± 0.1°/1°D/S ratio: 12:1Emissivity: Adjustable with three settings Low (0.3), Medium (0.7). High (0.95)Power Source: 2 AA batteries (alkaline or NiCD)

Kennedy Industrial No.500 Cable Stripper/Screwdriver/Volt Tester

Kennedy Industrial No.500 Cable Stripper/Screwdriver/Volt Tester

39.12 GBP

The newly developed Multi-Stripper PLUS, screwdriver, voltage tester, stripper for conductors, round and coaxial cables and cutter in only one tool. Screwdriver: two double ended bits: No.1PZ and 8855; x 3.5 slotted No.2PZ and 8855: x 4.0 slotted bit storage inside ergonomic dual material handle. Voltage tester: 110 - 250V. Round cable stripper: capacity 8 - 13mm dia (eg NYM 3x 1.5mm - 5x 2.5mm). Built-in side cutter: for PVC-isolated round cables max. 9mm dia. Coax stripper: two or three-level stripping of all common coaxial cables of 4.8 - 7.5mm dia. Wire stripper: for all common stranded and solid conductors 0.5mm (20AWG) to 6.0mm (10AWG).

Fluke Prv240 Proving Unit

Fluke Prv240 Proving Unit

130.8 GBP

PRV240The Fluke PRV240 proving unit is a portable, pocket-sized, battery-powered voltage source. It is unique in that it sources stable AC and DC voltages for both LoZ and HiZ instruments. The PRV240 reduces the risk of shock and arc flash by removing unnecessary exposure to a potentially hazardous electrical environment while verifying the functionality of test tools before and after absence or presence of voltage is checked.Output voltage: 240V AC RMS or DC (±10% ≥1MΩ). LoZ>3kΩ load (60V AC typical, 50V AC RMS minimum).Operating temperature: -10°C to +50°C.Safety: IEC61010-1, IEC61010-2-030.

PowerDsine PD-Tester PoE Tester

PowerDsine PD-Tester PoE Tester

24.99 USD

PowerDsine PD-Tester PoE Tester Color: White Specifications: Test Services: Tests RJ-45 outlet for power Indicates the type of power source, including: IEEE 802.3af midspans and switches Cisco pre-standard in-line switches High Power midspans Compact design specifically tailored for system integrators and installers Interfaces/Ports Ports: 1 x RJ-45 Female Network Connectivity Media: Category 5 STP Category 6 STP Status Indicators: Midspan LED Display (Blue) Endspan LED Display (Blue) Parts: 1 year limited Labor: 1 year limited

Fluke 77-Iv Multimeter

Fluke 77-Iv Multimeter

380.4 GBP

77-IVThe 77-IV has the features needed to repair most electrical and electronic problems. A large display and backlight assists work in dim areas. Minimum/Maximum to record signal fluctuations. Ergonomic overmolded housing with integrated probe holders. Auto and manual ranging and it meets Measurement Category 1000 It measures: Wide 1000 V measurement range Average responding AC measurements 0.3% accuracy 10 Amps continuous (20A for 30 seconds) Frequency and capacitance Resistance and continuity Measurement Category IV safety rating

Fluke Tl224 Suregrip Silicone Test Leads

Fluke Tl224 Suregrip Silicone Test Leads

28.8 GBP

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Startech LANTESTPRO Professional RJ45 Network Cable Tester with 4 Remote Loopback Plugs

Startech LANTESTPRO Professional RJ45 Network Cable Tester with 4 Remote Loopback Plugs

9769.0 INR

Startech LANTESTPRO Professional RJ45 Network Cable Tester with 4 Remote Loopback Plugs Specifications: Connector Type(s): RJ-45 Female Included in Package: Instruction sheet Remote Cable Tester w. 4 Loopback Plugs LED Indicators: (LCD Display) 2 lines by 16 characters with LED backlight Product Height: 50 mm [2 in] Product Length: 350 mm [13.8 in] Product Weight: 677 g [23.9 oz] Product Width: 190 mm [7.5 in] Shipping (Package) Weight: 1.1 kg [2.3 lb]

179 Fluke Multimeter

179 Fluke Multimeter

305.52 GBP

179 True RMS Voltage & Current Measurements Multimeter0.09% basic accuracy, 6000 count resolution. Display hold and auto hold. Frequency and capacitance measurements. Resistance, continuity and diode measurements. Temperature measurements. Min-max-average recording. EN61010-1 Cat III 1000V/Cat IV 600V.Measures twice as fast as other multimeters.Accessories: 80BK temperature probe. Installed 9V battery. Test leads. Users manual.

116 Fluke True Rms Multimeter

116 Fluke True Rms Multimeter

224.4 GBP

116Compact true-rms meter for HVAC troubleshooting. It has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.Voltage max: 600V AC/DC. Current max: 600mA AC/DC. Capacitance max: 500mF. Temp. range: -40°C - 400°C. Continuity: 600W. Diode test: 2V. Safety rating: Cat III 600V.

Fluke T150 Voltage/Continuity Tester

Fluke T150 Voltage/Continuity Tester

145.2 GBP

Features backlit LED ladder, voltage & polarity, single pole test for phase detection, audible & visual continuity test, rotary field indicator, switchable load (30mA with buttons pressed), vibrates under load, torch, digital backlit display with display hold, resistance measurement to 2k Ohm.Voltage AC/DC: 6V - 690VIP Rating: IP65Safety Certification: CATIV 600V, CATIII 690V

Fluke 424D Laser Distance Meter

Fluke 424D Laser Distance Meter

391.2 GBP

424DMeasure distance up to 100m single handed. 180º inclination sensor for levelling & height tracking and a built in compass to determine the 'heading'. Automatic end-piece correction for fast & accurate measurements from internal & external corners. Automatic end-piece correction. Stake out & Pythagoras functions. line backlit LCD display. 20 reading memory.

Tsatsas Black Suede Fluke Tote

Tsatsas Black Suede Fluke Tote

670.0 GBP

Handcrafted unstructured suede tote in black. Carry handle at top. Partially exposed bag interior featuring logo stamp in silver-tone, zippered pocket, and tonal leather lining. Magnetic fastening at bag throat. Patch pockets at interior. Leather lining in navy. Silver-tone hardware. Tonal stitching. Approx. 15 length x 15.5 height x 4 width.

Fluke T5-1000 Electrical Tester

Fluke T5-1000 Electrical Tester

167.58 GBP

Easy and accurate OpenJaw current measurementContinuity beeperCompact design with neat probe storageAuto off mode to conserve battery lifeAC Voltage: 100VDC voltage: 1000VAC./DC current 100AResistance: 1000WCalibration Frequency:45 to 66 HzDigital Display Count 1000Safety Category: 1000V CAT IIIWeight: 300gSize: (H x W x D)230 x 51 x 30.5mm

Fluke 115 Auto Ranging Multimeter

Fluke 115 Auto Ranging Multimeter

193.2 GBP

115Used for a wide variety of electrical and electronic testing applications. This true-rms meter provides easy one handed operation in a compact package. Voltage max: 600V AC/DC. Current max: 20A DC. Capacitance max: 1000mF. Frequency max: 50kHz. Continuity: 600W. Diode test: 2V. Safety rating: Cat III 600V.

Fluke T110 Voltage/Continuity Tester Switchable Load

Fluke T110 Voltage/Continuity Tester Switchable Load

79.2 GBP

Features backlit LED ladder, voltage & polarity, single pole test for phase detection, audible & visual continuity test, rotary field indicator, switchable load (30mA with buttons pressed), vibrates under load, torch.Voltage AC/DC: 12V - 690VIP Rating: IP65Safety Certification: CATIV 600V, CATIII 690V

Fluke 419D Laser Distance Meter

Fluke 419D Laser Distance Meter

255.6 GBP

419DLaser accuracy to 1mm. Automatically add or subtract measurements. Measure area & volume without calculation errors. Stake out & Pythagoras functions.80m distance measurement. 3 line backlit LCD display.20 reading memory. Tripod mount. IP54 water & dust resistant. 3 year warranty.

Tl80A-1 Fluke Electronictest Lead Set

Tl80A-1 Fluke Electronictest Lead Set

60.02 GBP

Electronic Test Lead Set - TL80A-1Basic electronic test lead kit. Comprising TL71-1 test leads, alligator clips, probe tip extenders and carry case.TL71 test leads : Cat III 1000 V / Cat IV-600 VAC175 alligator clips : Cat III 1000 V / Cat IV-600 VTP88 Backprobe pins : 60V dc

Linen Tester linen tester

Linen Tester linen tester

19.0 USD

For use in the graphic arts, engraving and industrial inspection needs. Black lacquered brass with 2 lenses that reduces distortion and give clear, sharp definition. Folds flat for easy carrying.The Linen Tester has a 1 in. x 1 in. viewing area and magnifies 6X.

Fluke 414D Laser Distance Meter

Fluke 414D Laser Distance Meter

134.4 GBP

414DMeasure distance up to 50m single handed. Laser accuracy to 2mm. Automatically add or subtract measurements. Measure area & volume without calculation errors. 2 line display. 5 reading memory.3,000 measurements. Includes protective pouch & belt lanyard.

Pyle PHCT45 Network Cable Tester

Pyle PHCT45 Network Cable Tester

12.99 EUR

Pyle PHCT45 Network Cable Tester Specifications: Made to crimp RJ45 plugs All-steel handles with padding Checks RJ45 and BNC network cables Checks up to four pairs of conductors for continuity and correct polarity Dimensions: 4.4" x 3.8" x 1"

Fluke T5-600 Electrical Testervolt, Continuity, Current

Fluke T5-600 Electrical Testervolt, Continuity, Current

164.4 GBP

TS-6004mm detachable probes, instruction sheet, continuity beeper, rugged enough to withstand 30m (10ft) drop. Features include continuity and auto power off.Voltage max: 600V, 600V DC.Current max: 100A.Resistance max: 1000W.Safety rating: Cat III.

Rapco Horizon Speak-On cable tester BLOX - STBLOX

Rapco Horizon Speak-On cable tester BLOX - STBLOX

59.3 USD

STBLOX is a speakon cable tester. Test 4 pole speakon cables. Test for shorts or open circuits. NL4MP input and NL4MP output. Tech DetailsApproximate size: 3 1/2" x 1 1/4" x 1"2) NL4MP Speakon jacks 4) Red LED indicators4) Pushbutton test switches

Tripp Lite Network Cable Continuity Tester for Cat5/Cat6, Phone and Coax Cable Assemblies (N044-000-R)

Tripp Lite Network Cable Continuity Tester for Cat5/Cat6, Phone and Coax Cable Assemblies (N044-000-R)

29.99 EUR

Tripp Lite Network Cable Continuity Tester for Cat5/Cat6, Phone and Coax Cable Assemblies (N044-000-R) Specifications: Connector A: RJ45 (FEMALE) Connector B: RJ11 (FEMALE) Number of Connectors: 5 Electrical Outlet Plug Type: Consumer Electronics

Fluke Networks SFPOWERMETER Network/ PC Service Tools

Fluke Networks SFPOWERMETER Network/ PC Service Tools

1091.99 EUR

Fluke Networks SimpliFiber SFPOWERMETER Pro Optical Power Meter Specifications: Number of USB Ports:1 Number of SC Ports:1 Product Type:Network Testing Device Package Contents: SimpliFiber SFPOWERMETER Pro Optical Power Meter SC Adapter

Tone & Probe Kit Multifunctional Wire Tracker Network Cable Tester (Red)

Tone & Probe Kit Multifunctional Wire Tracker Network Cable Tester (Red)

25.69 Ton

This wire tracker can help you locate the cable, confirm the cable and check the status of the circuitry. It is widly used in telephone net cable, computer net cable project and other projects involing metal conductive cable.

Fluke Networks 11292000 Pro-Tool IS50 Kit

Fluke Networks 11292000 Pro-Tool IS50 Kit

10793.0 INR

Fluke Networks 11292000 Pro-Tool IS50 Kit Specifications: Product Name: Pro-Tool Kit Product Type: Hardware Connectivity Kit Package Contents: IS50 with D914S Impact Tool D-Snips Cable Stripper EverSharp 66/110 cut blade

Kennedy Industrial Battery Tester

Kennedy Industrial Battery Tester

3.98 GBP

Tests 6, 12 and 24 volt batteries. Tough glass tube construction with colour coded float for easy reading which indicates the state of charge in each cell. Displays the specific gravity with a scale range of 1.100 to 1.300.

Multi-Purpose Battery Tester

Multi-Purpose Battery Tester

12.0 GBP

MW333A versatile battery checker for testing more than 12 types of batteries including AAA, AA, C, D, 9V, CR123A, CR2, CR-V3, 2CR5, CR-P2, button cells or other batteries with the same voltage. N.B. batteries not included.

Fluke T90 Voltage/Continuity Tester

Fluke T90 Voltage/Continuity Tester

52.8 GBP

Features backlit LED ladder, voltage & polarity, single pole test for phase detection, audible & visual continuity test.Voltage AC/DC: 12V - 690VIP Rating: IP54Safety Certification: CATIII 600V, CATII 690V

Fluke Networks 11291000 Networks IS40 ProTool Kit

Fluke Networks 11291000 Networks IS40 ProTool Kit

137.99 EUR

Fluke Networks 11291000 Networks IS40 ProTool Kit Package Contents: D814 Impact Tool Electricians D-Snips Cable Stripper EverSharp 66 / 110 Cut Blade Probe Pic Carrying case Parts: 1 year limited

Fluke 114 Auto Ranging Multimeter Electrical

Fluke 114 Auto Ranging Multimeter Electrical

159.6 GBP

114Used for troubleshooting on 'go/no-go' testing. It includes a feature to prevent false readings caused by ghost voltage.Voltage max: 600V AC/DC. Continuity: 600W. Safety rating: Cat III 600V.

Tester di alimentazione (blu)

Tester di alimentazione (blu)

13.6629558 USD

Il tester di alimentazione ¨¨ una tensione robusta, tester per PC-alimentatore.
ATX, BTX e ITX compliant, alimentatori possono essere testati.Indicare lo stato di tensione.

Tl76 Fluke Test Lead Set

Tl76 Fluke Test Lead Set

38.4 GBP

Pair of silicone insulated testleads with shrouded banana plugs and test probes with removeable lantern tips and GS38 probetip covers.IEC 61010 : Cat III 1000 V / Cat IV 600 V

NS-468 RJ45+RJ11+RJ12 Network Cable Tester (White)

NS-468 RJ45+RJ11+RJ12 Network Cable Tester (White)

6.59 NS-

This network cable tester can test corresponding double-twisted cables 1, 2, 3, 4,,5, 6, 7, 8 and G, meanwhile, it can judge wrong connection, short circuit and open circuit.

Tl75-1 Fluke Test Leads

Tl75-1 Fluke Test Leads

22.8 GBP

Test Leads - TL75-1 Pair of PVC insulated testleads with shrouded banana plugs and Hardpoint test probes with protective caps .IEC 61010 : Cat III 1000 V / Cat IV 600 V