Vidgrids » fuse holder 12 gauge

fuse holder 12 gauge

AC/DC Timer w/6 Fuse Output, Mini Fuse, Heavy Duty for 90 Amp

AC/DC Timer w/6 Fuse Output, Mini Fuse, Heavy Duty for 90 Amp

161.99 USD

12v 90 amp

COMBINATION DELAY TIMER WITH FUSE OUTPUT AND IGNITION OVERRIDE. HEAVY DUTY 90AMP

Features:

  • Emergency override switch provides a convenient way to restore power to your equipment by holding the button in
  • Programmable with external DIP switch for selecting and adjusting time delay
  • Built-in diagnostic red LED indicates timing functions active when flashing
  • Engineered electronically for reverse polarity protection
  • Potted compound construction. Solid state, sealed against vibration and moisture.
  • Delay time range: from 15 minutes to 8 hours. Tolerance plus (+) or minus (-) 10%
  • Allow 3-5 seconds for delay on break at ignition switch connection for delay activation
  • For installation, make a connection from the bolt (+) to the battery positive post with 4 gauge or thicker wire and the black wire (-) to the battery negative post. Connect the blue wire to fuse block (AM/FM radio) or cigarette lighter.

Specs:

Technical Specifications

Length4.25 in.
Width3 in.
Height1.375 in.
Mounting Hole Center5.250 x 2.250
Weight15 oz.
Enclosure MaterialImpact Resistant ABS thermoplastic



Electrical Specifications

Load Current Rate90 amps 12 VDC
Operating Voltage10 VDC min - 18 VDC max
Ignition Switch Trigger10.4 - 15.0 VDC, 10mA
Low Voltage Disconnect10.5
Over Voltage Disconnect17 volts
Operating Temperature-40 F to +185 F
Stand-by Current6 mA
Operating Current300 mA

Caution: An appropriate size fuse circuit breaker must be used to ensure safety.

AC/DC Timer w/6 Fuse Output, ATM Mini Fuse

AC/DC Timer w/6 Fuse Output, ATM Mini Fuse

134.99 USD

12v 30 amp

COMBINATION DELAY TIMER WITH
6 FUSE PANEL

Features:

  • Emergency override switch provides a convenient way to restore power to your equipment by holding the button in.
  • Protects communication equipment
  • Automatic On/Off
  • Very reliable & accurate
  • Programmable with external DIP switch for selecting and adjusting time delay
  • Built-in diagnostic red LED indicates timing functions active when flashing
  • Engineered electronically for reverse polarity protection
  • Potted compound construction. Solid state, sealed against vibration and moisture.
  • Delay time range: from 15 minutes to 8 hours. Tolerance plus (+) or minus (-) 10%
  • Allow 3-5 seconds for delay on break at ignition switch connection for delay activation
  • For installation, connect the red wire (+) to the battery positive post and the black wire (-) to the battery negative post. Connect the blue wire to fuse block (AM/FM radio) or cigarette lighter.

Technical Specifications:

  • Length: 4.25 in.
  • Width: 3 in.
  • Height: 1.375 in.
  • Mounting Hole Center: 5.250 x 2.250
  • Weight: 15 oz.
  • Enclosure Material: Impact Resistant ABS thermoplastic

Electrical Specifications

  • Load Current Rate: 30 amps 12 VDC
  • Operating Voltage: 10 VDC min - 18 VDC max
  • Ignition Switch Trigger: 10.4 - 15.0 VDC, 10mA
  • Low Voltage Disconnect: 10.5
  • Over Voltage Disconnect: 17 volts
  • Operating Temperature: -40 F to +185 F
  • Stand-by Current: 6 mA
  • Operating Current: 100 mA

 

Caution: An appropriate size fuse circuit breaker must be used to ensure safety.

Baseline 12-0228 Pinch Gauge - Hydraulic - HiRes Gauge - ER 100 lb Capacity

Baseline 12-0228 Pinch Gauge - Hydraulic - HiRes Gauge - ER 100 lb Capacity

220.18 USD

Baseline ER HiRes hydraulic pinch gauge has an extended range 100 pound capacity. Unit has blue body and an extra-large 3-1/2? analog gauge for easy reading. Unit has 2 year manufacturer?s warranty. The pinch gauge uses a hydraulic system to assure convenience, product reliability and measurement accuracy and repeatability. Therapist can support the pinch gauge during testing, yielding a more accurate result for all pinch tests. Use for tip, key and palmer tests. Maximum reading remains until the unit is reset. The Baseline pinch gauge is made in USA and the results are consistent with published Baseline and Jamar studies. The strength reading can be viewed as pounds or kilograms. CE Certified. Comes in a protective carrying case. HiRes Gauge - ER 100 lb. Capacity - blue, 2 year warrantyDimension: 6" Length X 1" Width X 3.5" Height

Baseline 12-0235 Pinch Gauge - Hydraulic - Standard - 50 lb Capacity

Baseline 12-0235 Pinch Gauge - Hydraulic - Standard - 50 lb Capacity

185.39 USD

Baseline standard hydraulic pinch gauge has a 50 pound capacity. Unit has blue body and 2-1/2? analog gauge. Unit has 2 year manufacturer?s warranty. The pinch gauge uses a hydraulic system to assure convenience, product reliability and measurement accuracy and repeatability. Therapist can support the pinch gauge during testing, yielding a more accurate result for all pinch tests. Use for tip, key and palmer tests. Maximum reading remains until the unit is reset. The Baseline pinch gauge is made in USA and the results are consistent with published Baseline and Jamar studies. The strength reading can be viewed as pounds or kilograms. CE Certified. Comes in a protective carrying case. Standard - 50 lb. Capacity - blue, 2 year warrantyDimension: 5" Length X 1" Width X 2.5" Height

Baseline 12-0222 Pinch Gauge - Hydraulic - HD - 50 lb Capacity

Baseline 12-0222 Pinch Gauge - Hydraulic - HD - 50 lb Capacity

218.02 USD

Baseline HD hydraulic pinch gauge has a 50 pound capacity. Unit has black body and 2-1/2? analog gauge. Unit has 5 year manufacturer?s warranty. The pinch gauge uses a hydraulic system to assure convenience, product reliability and measurement accuracy and repeatability. Therapist can support the pinch gauge during testing, yielding a more accurate result for all pinch tests. Use for tip, key and palmer tests. Maximum reading remains until the unit is reset. The Baseline pinch gauge is made in USA and the results are consistent with published Baseline and Jamar studies. The strength reading can be viewed as pounds or kilograms. CE Certified. Comes in a protective carrying case. HD - 50 lb. Capacity - black, 5 year warrantyDimension: 5" Length X 1" Width X 2.5" Height

"Kennedy Industrial Surface Gauge With 9"" & 12"" Pillars"

"Kennedy Industrial Surface Gauge With 9"" & 12"" Pillars"

44.39 GBP

Used for marking out lines parallel to a true edge or groove, and also to mark the centre of round bars. Machined base, two pillars, a double ended scriber and an adjustable attachment for holding scribers up to 1/4� diameter on to the pillar. The base has a machined V-groove for use on pipes and round bar and two frictionally held pins which are used as a guide when sliding along the true edge or groove. The angle of the pillar can be finely adjusted with the use of a knurled thumb screw. Supplied with two pillars.Base dimensions: 80 x 30mm.

Wooden Mallet BCC4-12 12 Pocket Countertop Business Card Holder

Wooden Mallet BCC4-12 12 Pocket Countertop Business Card Holder

36.78 USD

Solid oak counter top business card holders are an attractive way to display multiple cards in an organized fashion. These racks work well to present business cards in any setting or use them for gift cards at point of sale.Tiered to offer a full view of each pocket Solid oak sides and bottom sealed in a durable state-of-the-art finish Each pocket sits 1 2"D to hold a large supply of cardsDepth: 4-1 2 Height: 5-3 4 Material: Solid Oak Style: Contemporary Modern Width: 17

Fashion Fuse

Fashion Fuse

10.99 USD

Ideal for women and menswear. Great for handbag pockets and straps. Ideal substrate for T-shirt quilts. Designed for wovens and knits; no preshrinking required. To use, simply place the Fashion Fuse on the wrong side of the fabric to be fused, cover with a damp press cloth, and press. Do not use on triacetate, lace, seersucker or rainwear. 100% cotton, 46" x 36".

Rule-A-Matic Float Switch w/Fuse Holder

Rule-A-Matic Float Switch w/Fuse Holder

41.31 USD

Float Switchw/ Fuse HolderYear after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.

"Mitutoyo 192-670-10 (192-670) 12""Digimatic Height Gauge"

"Mitutoyo 192-670-10 (192-670) 12""Digimatic Height Gauge"

1151.04 GBP

"Clear LCD screen for error free readingImperial/Metric conversionZero/ABSoluteOrigin settingPreset/- directional switchingData holdData outputOverspeed alarmCoarse/fine feed switchingTungsten Carbide tipped scriberResolution: 0.01mm/0.0005"", Range: 300mm/12"", Weight: 6.5kgAccuracy: 0-300mm /- 0.02mm, 0-600mm /- 0.05mm, 0-1000mm /- 0.07mm"

Sign of the Crab P0026-12 12" Riser Holder

Sign of the Crab P0026-12 12" Riser Holder

47.25 USD

12" Riser Holder.Use this brace to support a Strom Plumbing shower riser pipe if it is not currently supported by the shower enclosure ring, like the P0691 Length can be adjusted on site For use on 5 8" OD risers onlyFinish: Chrome, Matte Nickel, Polished Nickel, Supercoated Brass, Oil Rubbed Bronze

Fuse Bar Stool in Brown

Fuse Bar Stool in Brown

136.25 USD

Take charge and speak up with a side dining chair with just the right amount of panache. Fuse features a compact back of durable PVC webbing, foam cushion and chrome plated tube base, to deliver an integrated design that doesnt work too hard to be somethi

Fuse Adjustable Armless Bar Stool in Black

Fuse Adjustable Armless Bar Stool in Black

140.0 USD

Take charge and speak up with a height adjustable pedestal bar stool with just the right amount of panache. Fuse features a compact back of durable PVC webbing, foam cushion and chrome plated base with footrest, to deliver an integrated design that doesnt

Fuse Bar Stool in Black

Fuse Bar Stool in Black

136.25 USD

Take charge and speak up with a modern bar stool with just the right amount of panache. Fuse features a compact back of durable PVC webbing, foam cushion and chrome plated tube base, to deliver an integrated design that doesnt work too hard to be somethin

Fuse Counter Stool in Brown

Fuse Counter Stool in Brown

131.25 USD

Take charge and speak up with a modern counter stool with just the right amount of panache. Fuse features a compact back of durable PVC webbing, foam cushion and chrome plated tube base, to deliver an integrated design that doesnt work too hard to be some

Fuse Office Chair in Tan

Fuse Office Chair in Tan

115.0 USD

Take charge and speak up with a height adjustable modern office chair with just the right amount of panache. Fuse features a compact back of durable PVC webbing, foam cushion and chrome plated hooded base, to deliver an integrated design that doesnt work

Peel 'n stick(tm) Fabric Fuse Roll

Peel 'n stick(tm) Fabric Fuse Roll

3.99 USD

This roll of handy tape is a washable and double-sided, press-on adhesive that's designed specifically for fabric. No sewing or ironing is needed -- simply press on and go! Use it on fabric, felt, ribbon, trims and more. Full roll is 5/8" x 6.67 yds.

"Mitutoyo 514-103 12"" X 300Mm Vernier Height Gauge"

"Mitutoyo 514-103 12"" X 300Mm Vernier Height Gauge"

374.88 GBP

Series 514The main scale can be finely adjusted in the vertical direction for easy zero point or reference point adjustment. Carbide tipped scriber.Main scale adjustment range: 15mm.Fine vernier adjustment range: 4mm.Accuracy: ±0.04mm/0.002�.

Kennedy Industrial 50Mm Dia.X 0-12 Bar Pressure Gauge

Kennedy Industrial 50Mm Dia.X 0-12 Bar Pressure Gauge

9.91 GBP

Fitted with a G1/8� brass thread, can be used to measure psi and bar readings and can be fitted directly onto any filter regulator - lubricators. Available in two face sizes (40mm and 50mm), made from tough ABS plastic. Back entry fittings.

Baseline 12-1060 Functional Finger Motion Gauge

Baseline 12-1060 Functional Finger Motion Gauge

19.92 USD

Clear plastic gauge simplifies and speeds measurement of composite finger flexion and finger-thumb opposition. Scale measure up to 10 centimeters. Baseline Functional Finger Motion Gauge Dimension: 10" Length X 4" Width X 0.1" Height

"Moore & Wright Mw193-30Ddl 12"" 300Mm Digital Height Gauge"

"Moore & Wright Mw193-30Ddl 12"" 300Mm Digital Height Gauge"

365.58 GBP

Functions: mm/inch conversion, on/off, zero setting, preset.Supplied with Carbide Tipped Scriber Hand Wheel operation with positive lock• Easy to read LCD display• Ground & Micro lapped measuring surfaces• Fine adjustment

Thunder Group ALSKDB002 - 12 Quart Aluminum Heavy Gauge Double Boil…

Thunder Group ALSKDB002 - 12 Quart Aluminum Heavy Gauge Double Boil…

68.71 USD

Thunder Group ALSKDB002 - 12 Quart Aluminum Heavy Gauge Double Boiler Mirror Finish - Set• Aluminum Heavy Gauge Double Boiler Mirror Finish• Category: Professional Cookware• Quantity: Set• Size: 12 Quart

"Workshop Industrial Quality 12"" Dual Column Height Gauge 0.001"""

"Workshop Industrial Quality 12"" Dual Column Height Gauge 0.001"""

179.99 GBP

Clear, easy to read dial face and two counters, measuring up and down movement. Dial has zero-set option at any scriber position, large feed wheel for setting. Carbide tipped scriber supplied with UKAS certificate.

Leatherman Fuse

Leatherman Fuse

69.99 EUR

Die 12 Funktionen des Fuse beinhalten die extra-langlebige Leatherman Messerklinge sowie drei längere Schraubendreher, um auch an engere Stellen zu gelangen. Die Schneide der Schere hat eine Verza..

Fun Fuse Bead Pegboard Shapes - Set of 12

Fun Fuse Bead Pegboard Shapes - Set of 12

8.79 USD

Clear plastic pegboards have removable printed paper guides. You get 2 each of 6 designs: Bear Butterfly Bug Cat Dinosaur and Flower. Each pegboard is approximately 3 1/2 x 4 1/4. Latex-Free.

XCSOURCE®  DC32V 6 Way Fuse Box Terminals Circuit Car Auto Blade Fuse Block Holder with 10 Fuse (2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A) MA698

XCSOURCE® DC32V 6 Way Fuse Box Terminals Circuit Car Auto Blade Fuse Block Holder with 10 Fuse (2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A) MA698

16.42 EUR

XCSOURCE® DC32V 6 Way Fuse Box Terminals Circuit Car Auto Blade Fuse Block Holder with 10 Fuse (2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 35A) MA698 Brand: XCSOURCE Type: Fuse Pullers

Panacea 561618 Stem Wire 16 Gauge 18 12/Pkg-Green

Panacea 561618 Stem Wire 16 Gauge 18 12/Pkg-Green

5.7 USD

PANACEA PRODUCTS-Painted Stem Wire-Use this wire to reinforce cut flowers, artificial arrangements, and foliage. This package contains twelve 16 gauge, 18in long green wires. Imported.

BlackPath Talon Eclipse GSX GST Black 52mm Dual Gauge Pod Vent Bezel Holder 1G DSM

BlackPath Talon Eclipse GSX GST Black 52mm Dual Gauge Pod Vent Bezel Holder 1G DSM

24.27 EUR

BlackPath Talon Eclipse GSX GST Black 52mm Dual Gauge Pod Vent Bezel Holder 1G DSM Fitment: 1990-1998/Mitsubishi/Eclipse^^1990-1998/Eagle/Talon^^1990-1998/Plymouth/Laser

Colorations Wet & Stick Fuse Beads Classroom Pack

Colorations Wet & Stick Fuse Beads Classroom Pack

25.99 USD

Create fuse bead masterpieces without a hot iron-just design and spray with water for instantly fused beads! Wet & stick fuse beads measure 3/16Dia.

"Mitutoyo 527-113 12"" Vernier Depth Gauge"

"Mitutoyo 527-113 12"" Vernier Depth Gauge"

159.46 GBP

"Mitutoyo Mitutoyo 527-113 12"" Vernier Depth Gauge Measuring & Test Equipment > Mechanical Gauges > Depth Micrometers & Gauges > Depth Gauges"

Bisley 12 Gauge Bore Brass Snap Caps - 2 pack

Bisley 12 Gauge Bore Brass Snap Caps - 2 pack

12.7 EUR

Bisley 12 Gauge Bore Brass Snap Caps - 2 pack Brand: Bisley Type: cleaning Size/Dimensions: One Size Features: Multi-Purpose

8 Way Circuit Automotive Middle-sized Blade Standard Fuse Box Block Holder

8 Way Circuit Automotive Middle-sized Blade Standard Fuse Box Block Holder

590.49 INR

8 Way Circuit Automotive Middle-sized Blade Standard Fuse Box Block Holder Type: Remote Controls Color: Black

DB Link ANLFH2 Single Position ANL Fuse Holder

DB Link ANLFH2 Single Position ANL Fuse Holder

9.44 EUR

DB Link ANLFH2 Single Position ANL Fuse Holder Type: Fuse Holder Parts: 1 year limited Labor: 1 year limited

Colorations Wet & Stick Fuse Bead Replacement Jar

Colorations Wet & Stick Fuse Bead Replacement Jar

10.99 USD

Create fuse bead masterpieces without a hot iron-just design and spray with water for instantly fused beads!

Fuse Bronze 12-Inch One-Light Outdoor Wall Sconce with Clear Glass

Fuse Bronze 12-Inch One-Light Outdoor Wall Sconce with Clear Glass

570.0 USD

- Clear Glass - Vertical Mounting Height: 5-Inches - Limited Lifetime Warranty - Bulb(s) not included.

Nike Lunar Safari Fuse Womens

Nike Lunar Safari Fuse Womens

54.95 USD

The womens Lunar Safari Fuse Womens Athletic Inspired Shoes from Nike have a mesh upperfor a great look.

1500W 8GA Car Audio Subwoofer Amplifier AMP Wiring Fuse Holder Wire Cable Kit FF

1500W 8GA Car Audio Subwoofer Amplifier AMP Wiring Fuse Holder Wire Cable Kit FF

99999.0 INR

1500W 8GA Car Audio Subwoofer Amplifier AMP Wiring Fuse Holder Wire Cable Kit FF Type: Charger Mount

12 Volt Cup Holder Dual Power Socket

12 Volt Cup Holder Dual Power Socket

10.99 USD

Fits in most cup holders Contains dual 12 volt sockets and dual USB ports Can charge...

20PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder

20PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder

11.08 SGD

20PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder Type: Electronic

DB Link ATC20A 20 Amp ATC Fuse

DB Link ATC20A 20 Amp ATC Fuse

5.99 EUR

DB Link ATC20A 20 Amp ATC Fuse Type: Fuse Parts: 1 year limited Labor: 1 year limited

10PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder

10PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder

5.34 AUD

10PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder Type: Electronic

DB Link AGU60 60 Amp AGU Fuse

DB Link AGU60 60 Amp AGU Fuse

7.99 SGD

DB Link AGU60 60 Amp AGU Fuse Type: Fuse Parts: 1 year limited Labor: 1 year limited

Install Bay Ynbc Butt Connector ,Yellow; 12 - 10 Gauge

Install Bay Ynbc Butt Connector ,Yellow; 12 - 10 Gauge

8.99 EUR

Install Bay Ynbc Butt Connector ,Yellow; 12 - 10 Gauge Type: Dash Installation Kits

5PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Car Fuse Holder 15A/10A

5PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Car Fuse Holder 15A/10A

3.63 AUD

5PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Car Fuse Holder 15A/10A

Install Bay 3Mytt 3M T Tap ,Yellow; 12 - 10 Gauge

Install Bay 3Mytt 3M T Tap ,Yellow; 12 - 10 Gauge

33.01 EUR

Install Bay 3Mytt 3M T Tap ,Yellow; 12 - 10 Gauge Type: Dash Installation Kits

Godinger 83871 Carousel Cupcake Holder - 12 Piece

Godinger 83871 Carousel Cupcake Holder - 12 Piece

63.37 USD

Carousel Cupcake Holder 12 Pieces.Height: 14 Length: 13 Weight: 5.43 Width: 13

10pcs Fuse Puller Car Automobile Fuse Clip Tools Extractor for Car Fuse Good

10pcs Fuse Puller Car Automobile Fuse Clip Tools Extractor for Car Fuse Good

4.52 AUD

10pcs Fuse Puller Car Automobile Fuse Clip Tools Extractor for Car Fuse Good

Car Truck Van 4 Way Circuit Middle-sized Blade Fuse Box Fuse Holder 250V New

Car Truck Van 4 Way Circuit Middle-sized Blade Fuse Box Fuse Holder 250V New

9.79 SGD

Car Truck Van 4 Way Circuit Middle-sized Blade Fuse Box Fuse Holder 250V New

10PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder 15A/10A

10PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder 15A/10A

2.7 GBP

10PCS CB radio Auto Stereo Chassis Panel Mount AGC Glass Fuse Holder 15A/10A

5pcs Fuse Puller Car Automobile Fuse Clip Tools Extractor for Car Fuse NEW

5pcs Fuse Puller Car Automobile Fuse Clip Tools Extractor for Car Fuse NEW

1.86 GBP

5pcs Fuse Puller Car Automobile Fuse Clip Tools Extractor for Car Fuse NEW