Vidgrids » ic housing 4

ic housing 4

Progress Lighting P87-ATQC 6" Incandescent Air Tight IC and Non IC Recessed Light Housing

Progress Lighting P87-ATQC 6" Incandescent Air Tight IC and Non IC Recessed Light Housing

19.08 USD

Quick connect unit can be installed in ceilings from 1 2" to 2-1 2" thick. Heavy duty mounting frame, full reflector design, UL and CUL listed for damp locationsBulb Included: No Bulb Type: Incandescent Category Group: Recessed Ltg. Category Sub Group: Recessed Housing New Collection: Recessed Depth: 7.25 Energy Star Compliant: No Height: 7.50 Height Frame: 10-3 4 Length: 6-7 8" ceiling opening Overall Length Ceiling Opening: 6-7 8 Style: Commercial Type: Housing Type: Recessed Weight: 9.20 Width: 10.75 Width Frame: 7-3 8{Wiring Universal junction box with snap-out sides Removable housing for field inspection of wiring Grounding pigtail Knockout free Romex clamps 1 2" and 3 4" Knock outs for rigid or BX fittings Pre-Installed wire quick connects Thru-branch wiring for 12 90º conductors (4 in 4 out) {Construction Tool less adjustment for 1 2" to 2-1 2" for thick ceilings Full wrap-around plaster frame Removable K.O. for remodel use (P8607-01 plaster frame clips also required) Galvanized steel construction Porcelain socket with nickel-plated brass screw shell Notched housing for chalkline alignment Pre-installed disposable plastic cap protects socket screw shell from paint overspray Socket can be used as a temporary work light with ‘A’ lamp {Bar Hangers Integral II ga. fluted nail for wood joist construction Integral snap-on T-bar mounting clip Rigid male female design span 24" for suspended ceilings Lock to secure housing Captive with extensive stop tab 90-degree mounting for tight spaces Joint alignment tab {Labeling IC and Non-IC rated Complies with Washing State Energy Code (WSEC) requirement for air tight UL-CUL listed for damp location and through branch wiring Approved for use in New York City per calendar 40330 {Lamp Trim Socket mounts to trim for optimum performance, and provides consistent vertical lamp position Trim-Lok action forces trim to fit snugly against the ceilingPryouts 1 2" and 3 4"

WAC Lighting HR3D-2015-NICA Duo 3" LED Warm Dimming IC-Rated Airtight New Construction Housing

WAC Lighting HR3D-2015-NICA Duo 3" LED Warm Dimming IC-Rated Airtight New Construction Housing

144.0 USD

Glare Reducing Dual-source LED Downlight with warm dimming technology from a base choice of 2700K or 3000K narrow flood, the Duo can be dimmed down to a warm 2200K flood with virtually no glare. The perfect recessed downlight for areas with multiple functions such as dining rooms, restaurants, living rooms, and more. Trim and housing are sold separately. Housing is available in an IC rated new construction and non-IC remodel option.5 Years functional, 2 years finish warranty Durable aluminum construction housing The trim contains the light source, and is available in two warm dimming color temperature ranges from 2700K to 2200K and 3000K to 2200K A spot light at the maximum light output for task The Duo becomes a wider beam distribution for ambient light source as it dims down Smooth and continuous dimming to 0% with an ELV electronic low voltage dimmer The lutron maestro MAELV-600 is recommendedADA Compliant: Yes Bulb Base: LED Module Bulb Type: LED Bulbs Included: No Collection: Duo Country of Origin: USA Plant Dark Sky: No Diameter: 4-5 8 Dimmable: Yes Energy Star: No Finish: Aluminum Hardwired or Portable: Hardwired Height: 5-1 2 Interior Exterior: Interior Length: 21-1 4 Location: Damp Material: Aluminum Reversible: No Safety Rating: ETL, cETL Style: Contemporary Title 24 Compliant: Yes Voltage: 120 Wattage: 15 Watts Per Bulb: 15 Weight: 3.01 Width: 10

WAC Lighting HR3D-2015-RA Duo 3" LED Warm Dimming Non-IC Airtight Remodel Housing

WAC Lighting HR3D-2015-RA Duo 3" LED Warm Dimming Non-IC Airtight Remodel Housing

117.0 USD

Glare Reducing Dual-source LED Downlight with warm dimming technology from a base choice of 2700K or 3000K narrow flood, the Duo can be dimmed down to a warm 2200K flood with virtually no glare. The perfect recessed downlight for areas with multiple functions such as dining rooms, restaurants, living rooms, and more. Trim and housing are sold separately. Housing is available in an IC Rated New construction and Non-IC Remodel option.5 Years functional, 2 years finish warranty Durable aluminum construction housing The trim contains the light source, and is available in two warm dimming color temperature ranges from 2700K to 2200K and 3000K to 2200K A spot light at the maximum light output for task The Duo becomes a wider beam distribution for ambient light source as it dims down Smooth and continuous dimming to 0% with an ELV Electronic Low Voltage dimmer The lutron maestro MAELV-600 is recommendedADA Compliant: Yes Bulb Base: LED Module Bulb Type: LED Bulbs Included: No Collection: Duo Country of Origin: USA Plant Dark Sky: No Diameter: 4-5 8 Dimmable: Yes Energy Star: No Finish: Aluminum Hardwired or Portable: Hardwired Height: 5-1 2 Interior Exterior: Interior Length: 21-1 4 Location: Damp Material: Aluminum Reversible: No Safety Rating: ETL, cETL Style: Contemporary Title 24 Compliant: Yes Voltage: 120 Wattage: 15 Watts Per Bulb: 15 Weight: 3.01 Width: 10

Progress Lighting P821-FB Non IC Rated Flat Surface Housing

Progress Lighting P821-FB Non IC Rated Flat Surface Housing

131.31 USD

Will maintain up to a one - hour fire rating when installed in a UL L500 series non - IC fire rated floor ceiling assembly.6" Incandescent Firebox Non - IC rated UL - CUL listed for damp locations and through branch wiring Fits into 2" x 10" construction UL Classified to maintain fire ratings of 1 hour or less for UL P200 and P500 series roof ceiling designs UL Classified to maintain fire ratings of 2 hours or less for UL D200, D500, G200, G500, L200 and L500 series floor ceiling designs Acoustically tested to maintain STC Ratings of L500 floor ceiling assemblies Ceiling opening: 6.88" , Recessed depth: 8.82" , plaster frame: 12.38" x 9.57"Bulb Included: No Category Group: Recessed Ltg. Category Sub Group: Recessed Housing New Collection: Recessed Depth: 8.81 Energy Star: No Height: 9.56 IC Rating: Non - IC Length: 6-7 8" ceiling opening New Construction: Yes Remodel: No Style: Commercial Transformer: No UL Listed: Yes Wattss (Max): 150 Weight: 14.00 Width: 12.38

Wayne DSP75 3/4 Hp, Cast Iron Housing, 20 Cord

Wayne DSP75 3/4 Hp, Cast Iron Housing, 20 Cord

330.1 USD

Wayne DSP75 3/4 Hp, Cast Iron Housing, 20 Cord • Pumps Up To 8800 GPH @ 0' • Durable, Cast Iron Submersible Sewage Pump • Split Phase Motor with Solid State Controller Boosts Torque at Start-up and When Moving Heavy Solids • Manual Operation (Control Box Or Pump Switch Sold Separately) See Sewage Accessory Section • 2" NPT Discharge Capable Of Handling 2" Solids • Designed For Easy Installation Without Any Plumbing Changes • Lower Ball Bearings For Quiet Long Life • Designed For Residential And Light Commercial Sewage Applications • Ideal For Basement Or Below Grade Installations • 120 Volt Switches Sold Separately, See Sewage Accessory Section • Designed For 18" Diameter Or Larger Sewage BasinsPerformanceHPVolts Discharge Head 0' 5' 10' 15'3/4120Gallons/Hour8800870070204680

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 13W) - With Emergency Backup

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 13W) - With Emergency Backup

453.0 USD

New Construction NON-IC Frame-In Kit with Emergency Backup for use with Six Inch Horizontal Fluorescent Trims (2 X 13W). Features: Integral 90 Minute EM Battery pack complies with all current emergency egress codes. Pre-wired test switch with surface mounting cover plate. NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. J-Box and ballast are accessible through ceiling opening. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Electronic ballast has end of life and inherent thermal protection. Compatible trims, purchased separately, are shown below in the Related Items section.

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 18W) - With Emergency Backup

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 18W) - With Emergency Backup

453.0 USD

New Construction NON-IC Frame-In Kit with Emergency Backup for use with Six Inch Horizontal Fluorescent Trims (2 X 18W). Features: Integral 90 Minute EM Battery pack complies with all current emergency egress codes. Pre-wired test switch with surface mounting cover plate. NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. J-Box and ballast are accessible through ceiling opening. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Electronic ballast has end of life and inherent thermal protection. Compatible trims, purchased separately, are shown below in the Related Items section.

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 26W) - With Emergency Backup

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 26W) - With Emergency Backup

471.9 USD

New Construction NON-IC Frame-In Kit with Emergency Backup for use with Six Inch Horizontal Fluorescent Trims (2 X 26W). Features: Integral 90 Minute EM Battery pack complies with all current emergency egress codes. Pre-wired test switch with surface mounting cover plate. NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. J-Box and ballast are accessible through ceiling opening. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Electronic ballast has end of life and inherent thermal protection. Compatible trims, purchased separately, are shown below in the Related Items section.

Progress Lighting P8057-20 4" eyeball Low Voltage IC/Non IC Trim in Antique Bronze

Progress Lighting P8057-20 4" eyeball Low Voltage IC/Non IC Trim in Antique Bronze

38.16 USD

eyeball. All trims have 360 positioning. Lamps tilt 30 max. 5" outside diameter.Bulb Included: No Bulb Type: Incandescent Category Group: Recessed Ltg. Category Sub Group: Recessed Lighting Trims Collection: Pinhole Trim Energy Star Compliant: No Finish: Antique Bronze Height: 2.38 Socket1 Max Wattage: 50 Socket1 Number Of Bulbs: 1 Style: Traditional Type: Recessed-Trim Weight: 0.50 Width: 5.00{Flange Antique Bronze (-20) has unpainted flanges that match the baffle finish Covers irregular ceiling openings {Trim Push-in leaf spring action forces trim to fit snugly against the ceiling Lamp tilt 30 degrees, 360 degree positioning Steel construction eyeball finish matches trim finish {Labels UL-CUL damp location listed {Photometrics Refer to MR16 Lamp Application Data

Progress Lighting P8074-28 6" Open Incandescent IC and Non IC Trim Trim in White

Progress Lighting P8074-28 6" Open Incandescent IC and Non IC Trim Trim in White

11.7 USD

UL and CUL listed for damp locations. 8-3 4" O.D.Bulb Included: No Bulb Type: Incandescent Category Group: Recessed Ltg. Category Sub Group: Recessed Lighting Trims Collection: Open Trim Energy Star Compliant: No Finish: White Height: 4.75 Style: Traditional Trim Size: 6 Type: Housings Weight: 1.00 Width: 8.75{Flange Bright white powder painted integral metal flange No light leaks around trim flange Covers irregular ceiling openings {Trim Aluminum construction Socket mounts to trim for optimum performance and consistent lamp position Trim-Lok action forces trim to fit snugly against the ceiling Splay design optimally accommodates Par38 lamps {Labels UL-CUL damp location listed Rated IC and Non-IC {Photometrics Refer to PAR38 and BR40 Lamp Application Data

Lomography LCA+ Krab Underwater Housing

Lomography LCA+ Krab Underwater Housing

65.95 GBP

Back in the 1980s, the Soviet Union�fs camera industry was in full swing and a small, blocky underwater case was created for the popular Lomo Kompakt Automat camera. Crafted in solid metal, perfectly aligned with the LC-A�fs knobs and curves, and designed with a distinctively Russian character, this item was never produced beyond the prototype stage and is exceptionally difficult to find. Re-built from the ground up, given stronger seals and a deeper effective depth, our ALL-NEW LOMO LC-A+ KRAB ? an exclusive reproduction of and vast improvement upon the original Soviet-era treasure - will take your Lomo LC-A+ 20m (65 feet) beneath the water�fs surface for spectacular & other-worldly undersea Lomography!

Tesla 3.5-Inch 120V Housing

Tesla 3.5-Inch 120V Housing

198.0 USD

- IC-Rated, airtight, new construction housing with Chicago Plenum rating. For use with HR-3LED Tesla and Tesla 3-Inch PRO series trims. Chicago Plenum housings add extra building safety features that confine airflow in and out of the housing with elastomer gasket. - Provided with push-in wire connector for easy installation - Accommodated ceiling thickness from.5-Inch to.75-Inch. - Supplied with hanger bars, adjustable from 15-Inch-24.5-Inch - IC Rated: Suitable for direct contact with insulation - May be dimmed to 1 percent with electronic low voltage dimmer. - C300Universal 120V-277V driver with ELV and/or 0-10V dimming. - Hardwire fixture - Warranty: 5 years on components and 2 years on finish.

Lomography LCA+ Krab Underwater Housing

Lomography LCA+ Krab Underwater Housing

91.67 USD

Back in the 1980s, the Soviet Union?fs camera industry was in full swing and a small, blocky underwater case was created for the popular Lomo Kompakt Automat camera. Crafted in solid metal, perfectly aligned with the LC-A?fs knobs and curves, and designed with a distinctively Russian character, this item was never produced beyond the prototype stage and is exceptionally difficult to find. Re-built from the ground up, given stronger seals and a deeper effective depth, our ALL-NEW LOMO LC-A+ KRAB ? an exclusive reproduction of and vast improvement upon the original Soviet-era treasure - will take your Lomo LC-A+ 20m (65 feet) beneath the water?fs surface for spectacular & other-worldly undersea Lomography!

NON-IC Magnetic New Construction Housing for Metal Halide Recessed Trims

NON-IC Magnetic New Construction Housing for Metal Halide Recessed Trims

389.9 USD

The Metal Halide series of recessed downlights from WAC Lighting are best used in areas where high footcandle levels, long lamp life and crisp white light are desired. The NON-IC New Construction Frame-in Kit for Metal Halide Trims from WAC Lighting allows for a vertical lamping position and provides a high angle cutoff and maximum efficiency. Features: NON-IC Housing, 3" clearance on all sides must be maintained when insulation is present. J-Box and ballast are accessible through ceiling opening. U.L. listed for through branch circuit wiring. Magnetic HPF ballast. Minimum power factor: 9037;. Supplied with hanger bars adjustable to 25". Bars have notches for easy installation on T-Bar ceiling.

IC Shallow New Construction Housing for Six Inch Line Voltage Recessed Trims

IC Shallow New Construction Housing for Six Inch Line Voltage Recessed Trims

29.0 USD

IC New Construction Shallow Airtight Ready Housing for use with Six Inch Recessed Trims. Small sized housing is compact enough to fit in 2x6 joist installations, allowing these to be used in "shallow" applications such as 2-story houses or where attic space is used for storage. Features: IC rated housing, suitable for direct contact with insulation. Shallow housing ideal for use in 2" x 6" joist installations. Air-tight when used with the option RGK gasket kit (sold separately). UL listed for through branch circuit wiring. Four knockouts and four Romexeg; style wiring connectors provided for ease of installation. Exact wattage and lamp choice are dependant on trim selection.

IC Shallow Remodel Housing for Six Inch Line Voltage Recessed Trims

IC Shallow Remodel Housing for Six Inch Line Voltage Recessed Trims

23.9 USD

IC Remodel Shallow Airtight Ready Housing for use with Six Inch Recessed Trims. Small sized housing is compact enough to fit in 2x6 joist installations, allowing these to be used in "shallow" applications such as 2-story houses or where attic space is used for storage. Features: IC rated housing, suitable for direct contact with insulation. Shallow housing ideal for use in 2" x 6" joist installations. Air-tight when used with the option RGK gasket kit (sold separately). UL listed for through branch circuit wiring. Four knockouts and four Romexeg; style wiring connectors provided for ease of installation. Exact wattage and lamp choice are dependant on trim selection.

Progress Lighting P8057-36 4" eyeball Low Voltage IC/Non IC Trim in Chestnut

Progress Lighting P8057-36 4" eyeball Low Voltage IC/Non IC Trim in Chestnut

4.5 USD

Chestnut finish 4" eyeball Trim IncBulb Type: Incandescent Category Group: Recessed Ltg. Category Sub Group: Recessed Lighting Trims Collection: Recessed-4" LV Trim Energy Star Compliant: No Finish: Chestnut Height: 2.38 Style: Transitional Type: Recessed-Trim Weight: 0.50 Width: 5.00{Flange Chestnut (-36) has unpainted flanges that match the baffle finish Covers irregular ceiling openings {Trim Push-in leaf spring action forces trim to fit snugly against the ceiling Lamp tilt 30 degrees, 360 degree positioning Steel construction eyeball finish matches trim finish {Labels UL-CUL damp location listed {Photometrics Refer to MR16 Lamp Application Data

4-Inch Low Voltage New Construction Insulated Contact Housing

4-Inch Low Voltage New Construction Insulated Contact Housing

157.0 USD

This low-voltage recessed housing is UL listed for use in direct contact with approved insulation allowing for significant energy savings. It meets airtight requirements for 2.0 CRM or less air leakage. A thermal protector safeguards against overheating caused by overlamping. The housing is removable for easy access to the junction box. The junction box features snap-on covers, pry-out knockouts, riveted ground wire, through branch circuit wiring, and 4-out 12 wires. Bar hangers are adjustable to 25 1/4? and are mounted on edge for sturdy installation. It includes an integral magnetic transformer for years of trouble-free operation.

IC Shallow New Construction Housing for Five Inch Line Voltage Recessed Trims

IC Shallow New Construction Housing for Five Inch Line Voltage Recessed Trims

29.0 USD

IC Shallow New Construction Housing for use with Five Inch Line Voltage Recessed Trims. Features: IC rated downlight, suitable for direct contact with insulation. Shallow housing ideal for use in 2" x 6" joist installations. Order RGK gasket kit (sold separately) to ensure airtight installation. Spring loaded door allows for easy access to wiring. Supplied with eight standard knockouts and four integral non-metallic sheathed cable clamps. Supplied with hanger bars adjustable to 25". Hanger bars have score lines and can be cut to accommodate 12" joist spans. UL listed for through branch circuit wiring. Suitable for damp locations.

Progress Lighting P8145-28 4" Open IC Trim in White

Progress Lighting P8145-28 4" Open IC Trim in White

27.63 USD

Open Trim. UL and CUL listed for damp locations.Collection: Open Trim Energy Star Compliant: No Finish: White Light Direction: Down Lighting Style: Traditional Suggested Room Fit: Kitchen Type: Recessed-Trim Weight: 0.5 Width: 4-1 4" D.{Flange Brite white powdered painted metal Flange for -28 finish No light leaks around Trim Flange Covers irregular ceiling openings {Trim One piece aluminum construction Push-in leaf spring installation Socket mounts to Trim for optimum performance and consistent lamp position Patented " Hurricane" leaf spring allows ease of Trim removal by rotating counterclockwise {Labels UL-CUL damp location

NON-IC New Construction Housing for Six Inch Horizontal Fluorescent Trims (2 X 18W)

NON-IC New Construction Housing for Six Inch Horizontal Fluorescent Trims (2 X 18W)

133.0 USD

New Construction NON-IC Frame-In Kit for use with Six Inch Horizontal Fluorescent Trims (2 X 18W). Features: NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. J-Box and ballast are accessible through ceiling opening. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Electronic ballast has end of life and inherent thermal protection. Compatible trims, purchased separately, are shown below in the Related Items section.

NON-IC New Construction Housing for Six Inch Horiztonal Fluorescent Trims (2 X 13W)

NON-IC New Construction Housing for Six Inch Horiztonal Fluorescent Trims (2 X 13W)

133.0 USD

New Construction NON-IC Frame-In Kit for use with Six Inch Horizontal Fluorescent Trims (2 X 13W). Features: NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. J-Box and ballast are accessible through ceiling opening. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Electronic ballast has end of life and inherent thermal protection. Compatible trims, purchased separately, are shown below in the Related Items section.

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 26W)

NON-IC New Construction Housing For Six Inch Horizontal Fluorescent Trims (2 X 26W)

151.9 USD

New Construction NON-IC Frame-In Kit for use with Six Inch Horizontal Fluorescent Trims (2 X 26W). Features: NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. J-Box and ballast are accessible through ceiling opening. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Electronic ballast has end of life and inherent thermal protection. Compatible trims, purchased separately, are shown below in the Related Items section.

Sea Gull Lighting 1115 Remodel / Non IC Incandescent Recessed Housing

Sea Gull Lighting 1115 Remodel / Non IC Incandescent Recessed Housing

22.0 USD

For remodeling jobs, this single Non - IC incandescent recessed housing accommodates up to 50W PAR 20 reflector lamp.Thermal protector safeguards against overheating, and housing is UL listed ~Light Bulbs~: 1 - 50W Max 120V PAR 20 Reflector Lamp - Bulb(s) Not IncludedEnergy Star: No IC Rating: Non - IC new Construction: No Remodel: Yes Socket 1 Base: Medium Socket 1 Max Wattage: 50 Socket 2 Base: Medium Socket 2 Max Wattage: 35 Transformer: No UL Listed: YesAll Sea Gull Lighting recessed lighting products are UL Listed and meet NEC requirements when housing and trims are used as specified

IC New Construction Housing for Five Inch Line Voltage Recessed Trims

IC New Construction Housing for Five Inch Line Voltage Recessed Trims

29.0 USD

IC New Construction Housing for use with Five Inch Line Voltage Recessed Trims. Features: IC rated downlight, suitable for direct contact with insulation. Order RGK gasket kit (sold separately) to ensure airtight installation. Spring loaded door allows for easy access to wiring. Supplied with eight standard knockouts and four integral non-metallic sheathed cable clamps. Supplied with hanger bars adjustable to 25". Hanger bars have score lines and can be cut to accommodate 12" joist spans. UL listed for through branch circuit wiring. Suitable for damp locations.

NON-IC New Construction Housing for Six Inch Fluorescent Trims (13w) - Emergency Backup

NON-IC New Construction Housing for Six Inch Fluorescent Trims (13w) - Emergency Backup

425.0 USD

New Construction Non-IC Frame-In Kit for use with Six Inch Fluorescent Trims. Features: NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. Integral 90 Minute EM Battery pack complies with all current emergency egress codes. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. Pre-wired test switch with surface mounting cover plate. U.L. listed for through branch circuit wiring. Compatible trims, purchased separately, are shown below in the Related Items section.

Sea Gull Lighting 1109 IC Sloped Recessed Light Housing

Sea Gull Lighting 1109 IC Sloped Recessed Light Housing

40.0 USD

Single IC Sloped Recessed Light Housing, Adjustable to Fit Varied Ceilings.All housings are thermally protected and UL listed for damp location This item accommodates up to 75W PAR 38 or 65W BR40 reflector lamp Easy to installBulb Type: Incandescent Energy Star: No IC Rating: IC Remodel: No Socket 1 Base: Medium Socket 1 Max Wattage: 75 Socket 2 Base: Medium Socket 2 Max Wattage: 75 Transformer: No UL Listed: Yes Watts (Max): 75All Sea Gull Lighting recessed lighting products are UL Listed and meet NEC requirements when housing and trims are used as specified

Sea Gull Lighting 1128 Incandescent IC Airtight Housing

Sea Gull Lighting 1128 Incandescent IC Airtight Housing

18.0 USD

This IC recessed light housing features an air - tight application providing quality illumination while offering energy efficiency and lower operating costs.~Light Bulbs~: 1 - Medium Base 75W Max 120V - Bulb(s) Not IncludedBulb Type: Halogen Energy Star: No IC Rating: IC new Construction: Yes Remodel: No Socket 1 Base: Medium Socket 1 Max Wattage: 50 Socket 2 Base: Medium Socket 2 Max Wattage: 75 Transformer: No UL Listed: YesAll Sea Gull Lighting recessed lighting products are UL Listed and meet NEC requirements when housing and trims are used as specified

Wayne Jsu50 Cast Iron Housing

Wayne Jsu50 Cast Iron Housing

218.9 USD

Wayne JSU50 Cast Iron Housing • Pumps Up To 288 Gallons Per Hour @ 5ï¾’ Depth - (50 PSI) • For Wells 0ï¾’ - 25ï¾’ In Depth • Dual Voltage (120/240) High Efficiency Square Flange Motor • (Factory Wired For 120 Volts) • 3/4" NPT Discharge With 11/4" Suction • Pressure Switch Is Pre-Set At 30-50 PSI For Automatic Operation • Dedicated Priming Port For Volute Filling • Durable Cast Iron VolutePerformance PSI 0' 5' 10' 15' 20'25'306846546245885525224052249243840235431250324288352210162108

NON-IC New Construction Housing for Six Inch Fluorescent Trims (26w Or 32w)

NON-IC New Construction Housing for Six Inch Fluorescent Trims (26w Or 32w)

105.0 USD

New Construction Non-IC Frame-In Kit for Six Inch Fluorescent Trims. Features: NON-IC downlight, 3" clearance on all sides must be maintained when insulation is present. Vertical lamp position allows for high angle cutoff and maximum efficiency. CFL lamp technology offers high quality light with substantial energy savings as compared to incandescent lamps. J-Box and ballast are accessible through ceiling opening. U.L. listed for through branch circuit wiring. Compatible trims, purchased separately, are shown below in the Related Items section.

WAC Lighting R-402S-N-ICA 4" Line Voltage IC New Construction Housing

WAC Lighting R-402S-N-ICA 4" Line Voltage IC New Construction Housing

31.0 USD

IC rated downlight, suitable for direct contact with insulation Order RGK gasket kit separately to ensure airtight installation Suitable for direct contact with insulation UL listed for through branch circuit wiring Hanger bars slots are located on all four sides of the frame Certified Air Tight per ASTM E283Category Group: Recessed Ltg. Category Sub Group: Recessed Housing New Cutout: 4-7 16 Depth: 6.00 Height: 6 Input: 120v Light Direction: Down Lighting Style: Commercial UL Listed: Yes Voltage: 120V Weight: 2.92 Width: 12 - 25

IC New Construction Enclosed Housing for Six Inch Line Voltage Recessed Trims

IC New Construction Enclosed Housing for Six Inch Line Voltage Recessed Trims

45.9 USD

IC New Construction Enclosed Housing for use with Six Inch Recessed Trims. Features: IC rated housing, suitable for direct contact with insulation. Boxed style housings allows for the use of higher wattage lamps. Air-tight when used with the optional RGK gasket kit. J-Box accessible through ceiling opening. UL listed for through branch circuit wiring. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Exact wattage and lamp choice dependant on trim selection.

HR-LED309-N - 3 in. LED New Construction NON-IC Housing

HR-LED309-N - 3 in. LED New Construction NON-IC Housing

239.0 USD

Non-IC new construction housing with 3 LED lamps. 3" of clearance on all sides must be maintained when insulation is present. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum painted black heat sink. Housing and junction box in 20 gauge steel. Frame and hanger bars are heavy gauge galvanized steel. 3 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

HR-LED418-N - 4 in. LED New Construction NON-IC Housing

HR-LED418-N - 4 in. LED New Construction NON-IC Housing

249.9 USD

Non-IC new construction housing with 6 LED lamps. 3" of clearance on all sides must be maintained when insulation is present. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum painted black heat sink. Housing and junction box in 20 gauge steel. Frame and hanger bars are heavy gauge galvanized steel. 6 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

WAC Lighting R-401S-R-A 4" Line Voltage Non-IC Shallow Remodel Housing

WAC Lighting R-401S-R-A 4" Line Voltage Non-IC Shallow Remodel Housing

20.0 USD

NON-IC downlight, 3" clearance must be maintained when insulation is present J-Box accessible through ceiling opening Order RGK gasket kit separately to ensure airtight installation UL listed for direct chain wiring to other housings Certified Air Tight per ASTM E283Category Group: Recessed Ltg. Category Sub Group: Recessed Housing Remodel Cutout: 4-7 16 Depth: 5.69 Height: 5-11 16 Input: 120v Length: 25.00 Light Direction: Down Lighting Style: Commercial Voltage: 120V Weight: 1.50 Width: 11-3 8

IC Shallow Remodel Housing for Five Inch Line Voltage Recessed Trims

IC Shallow Remodel Housing for Five Inch Line Voltage Recessed Trims

29.0 USD

IC Shallow Remodel Housing for use with Five Inch Line Voltage Recessed Trims. Features: IC rated downlight, suitable for direct contact with insulation. Shallow housing ideal for use in 2" x 6" joist installations. Order RGK gasket kit (sold separately) to ensure airtight installation. Supplied with four standard knockouts and four integral non-metallic sheathed cable clamps. Spring loaded door allows for easy access to wiring. Suitable for damp locations.

NON-IC New Construction Housing for Six Inch Fluorescent Trims (26w Or 32w) - Emergency Backup

NON-IC New Construction Housing for Six Inch Fluorescent Trims (26w Or 32w) - Emergency Backup

425.0 USD

Non-IC frame-in kit for six inch fluorescent recessed trims. Features: Electronic ballast. J-box and ballast accessible through ceiling opening. 3" clearance on all sides must be maintained when insulation is present. Uses 26W or 32W tri-tube 4-pin fluorescent bulb (not included). Integral 90 Minute EM Battery pack complies with all current emergency egress codes. Compatible trims, purchased separately, are shown below in the Related Items section.

IC New Construction Housing for Six Inch Line Voltage Recessed Trims

IC New Construction Housing for Six Inch Line Voltage Recessed Trims

27.9 USD

IC New Construction Airtight Ready Housing for use with Six Inch Recessed Trims. Features: IC rated housing, suitable for direct contact with insulation. Air-tight when used with the optional RGK gasket kit. J-Box accessible through ceiling opening. UL listed for through branch circuit wiring. Seven knockouts and four integral Romexeg; wiring connectors provided for ease of installation. Exact wattage and lamp choice dependant on trim selection.

HR-LED418-NIC - 4 in. LED New Construction IC Housing

HR-LED418-NIC - 4 in. LED New Construction IC Housing

259.9 USD

New construction housing suitable for direct contact with insulation. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum painted black heat sink. Housing and junction box in 20 gauge steel. Frame and hanger bars are heavy gauge galvanized steel. 6 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

HR-LED309-NIC - 3 in. LED New Construction IC Housing

HR-LED309-NIC - 3 in. LED New Construction IC Housing

247.9 USD

New construction housing suitable for direct contact with insulation. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum painted black heat sink. Housing and junction box in 20 gauge steel. Frame and hanger bars are heavy gauge galvanized steel. 3 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

HR-LED418-R - 4 in. LED Remodel NON-IC Housing

HR-LED418-R - 4 in. LED Remodel NON-IC Housing

243.9 USD

Non-IC remodel housing with 6 LED lamps. 3" of clearance on all sides must be maintained when insulation is present. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum heat sink. Housing and junction box in 20 gauge steel. 6 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

HR-LED309-R - 3 in. LED Remodel NON-IC Housing

HR-LED309-R - 3 in. LED Remodel NON-IC Housing

235.0 USD

Non-IC remodel housing with 3 LED lamps. 3" of clearance on all sides must be maintained when insulation is present. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum heat sink. Housing and junction box in 20 gauge steel. 3 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

HR8401 Housing / Magnetic Transformer / Remodeling / Non-IC

HR8401 Housing / Magnetic Transformer / Remodeling / Non-IC

51.9 USD

Housing with magenetic transformer, suitable for remodeling applications. Maximum 50W. Thermally protected. Not suitable for branch circuit wiring. Socket included with housing. Equivalent to Halo H1499RT. For remodeling applications. Slips through a hole in the finished ceiling. Pre-wired snap out integral magnetic transformer. Compatible trims, purchased separately, are shown below in the Related Items section.

Power Products Battery, 7.2V/1050mAh/NiCd/Screw On Clip For ICom IC-A24/IC-A6/IC-F11/IC-F21/IC-F11S/IC-F21S/IC-F21BR/IC-F21GM/IC-F3GS/IC-F4GS/IC-F3GT/IC-F4GT/IC-F30GS/IC-F40GS/IC-F30GT/IC-F40GT/IC-V8/IC-V82/IC-U82

Power Products Battery, 7.2V/1050mAh/NiCd/Screw On Clip For ICom IC-A24/IC-A6/IC-F11/IC-F21/IC-F11S/IC-F21S/IC-F21BR/IC-F21GM/IC-F3GS/IC-F4GS/IC-F3GT/IC-F4GT/IC-F30GS/IC-F40GS/IC-F30GT/IC-F40GT/IC-V8/IC-V82/IC-U82

46.99 USD

Battery for ICOM IC-F3GT - 7.2V / 1050 mAh / NiCd
Also Fits: IC-A6, IC-A24, IC-F3GS, IC-F4GS, ICF4GT, IC-F11, C-F11S, IC-F21 more.
Includes screw-on style belt clip.

  • Other Compatible Radios: IC-F21BR, IC-F21GM, IC-F21S, IC-F30, IC-F30GS, IC-F30GT, IC-F40, IC-F40GS, IC-F40GT, IC-U82, IC-V8, IC-V82.
  • Replaces OEM Part Number: BP209N.

IC Remodel Housing for Five Inch Line Voltage Recessed Trims

IC Remodel Housing for Five Inch Line Voltage Recessed Trims

29.0 USD

IC Remodel Housing for use with Five Inch Line Voltage Recessed Trims. Features: IC rated downlight, suitable for direct contact with insulation. Order RGK gasket kit (sold separately) to ensure airtight installation. Supplied with four standard knockouts and four integral non-metallic sheathed cable clamps. Spring loaded door allows for easy access to wiring. Suitable for damp locations.

WAC Lighting R-400S-N-A 4" Line Voltage Non-IC Shallow New Construction Housing

WAC Lighting R-400S-N-A 4" Line Voltage Non-IC Shallow New Construction Housing

22.0 USD

NON-IC downlight, 3" clearance must be maintained when insulation is present J-Box accessible through ceiling opening Order RGK gasket kit separately to ensure airtight installation UL listed for through branch circuit wiring Suitable for use in 2" x 6" joist installations Certified Air Tight per ASTM E283Cutout: 4-7 16 Height: 5 Input: 120v Light Direction: Down Lighting Width: 12" - 25"

NON-IC New Construction Housing for Six Inch Fluorescent Trims (13w)

NON-IC New Construction Housing for Six Inch Fluorescent Trims (13w)

105.0 USD

NON-IC frame-in kit for six inch fluorescent recessed trims. Features: Electronic ballast. J-box and ballast accessible through ceiling opening. 3" clearance on all sides must be maintained when insulation is present. Four use with the pictured trims only. UL listed for through branch circuit wiring. Compatible trims, purchased separately, are shown below in the Related Items section.

HR-LED309-RIC - 3 in. LED Remodel IC Housing

HR-LED309-RIC - 3 in. LED Remodel IC Housing

243.0 USD

Remodel housing with 3 LED lamps. Can be completely covered with insulation. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum heat sink. Housing and junction box in 20 gauge steel. 3 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

HR-LED418-RIC - 4 in. LED Remodel IC Housing

HR-LED418-RIC - 4 in. LED Remodel IC Housing

253.9 USD

Remodel housing with 6 LED lamps. Can be completely covered with insulation. Features: Full scale dimming to 1%, optimal dimming is with an electronic low-voltage dimmer. Die-cast aluminum heat sink. Housing and junction box in 20 gauge steel. 6 LEDs from ANSI compliant Warm/Neutral bins. 50,000 hour potential life. Available wih choice of warm or cool LEDs. Replaceable LED module.

IC Remodel Housing for Six Inch Line Voltage Recessed Trims

IC Remodel Housing for Six Inch Line Voltage Recessed Trims

27.0 USD

IC Remodel Airtight Ready Housing for use with Six Inch Recessed Trims. Features: IC rated housing, suitable for direct contact with insulation. Air-tight when used with the optional RGK gasket kit. UL listed for chain wiring. Four knockouts and four Romexeg; style wiring connectors provided for ease of installation. Exact wattage and lamp choice are dependant on trim selection.