Vidgrids » li gisele

li gisele

Combo: Tenergy TB6B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply

Combo: Tenergy TB6B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply

99.99 USD

The Best ALL-IN-One Universal Charger in the Market Tenergy "Octopus" Multi Charging Harness Also Included ($10.99 value added FREE!)Supports the following connector types TraxxasTamiyaMini Tamiya (for Airsoft packs) JSTHitec EC3 DeansSupports MULTIPLE types of battery packs with one single charger! The follow packs are supported NiMH/NiCD 1~15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) Li-Fe 1~6 series Sealed Lead Acid (SLA) What does it mean for an RC Car/Helicopter or Airsoft Hobbyist? Charge yourNiMH/NiCD Receiver Packs3.6v, 4.8v, 6v, or 9.6vCharge your LiFE Packs3.2v - 19.2vCharge your normal NiMH/NICD Packs7.2v, 8.4v, 9.6v, 10.8v, 12vCharge your High Performance LIPO Packs7.4v, 11.1v, 14.8v, 18.5vCharge your Airsoft NiMH/NICD Packs8.4v, 9.6v, 12vCharge your Airsoft LIPO/LiFe Packs *NotePack voltages above are samples of the more popular hobby packs. See bottom chart for full Chemistry and Voltage support. One single TB6b supports all these battery packs. PLUS! It will balance your expensive LiFe & LIPO packs to ensure longer cycle and battery life.Future proof yourself for any new battery pack or upgrades, instead of having contantly buy 1 charger for each type of pack.What does it mean for a custom pack builder? Endless fun and charging capabilities - you have an All-in-One charger for any kind of pack idea you have! Charger Specifications Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries. Easy to Read LCDBuilt-in Balancer DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz (AC Adapter) Charge/discharge powermax. 50/5 WattsNiCd/MH 1~15 cellsLiIo/LiPo/LiFe 1~6 series Pb2~20VCharge current0.1 to 5.0ADischarg current0.1 to 1.0ANo. of cycle1 to 5 times Battery data memory up to 5 data Weight246gDimension130x85x33 mmUser's setting-up parametersBattery voltage typeLiIo:3.6V, LiPo:3.7V, LiFe:3.2VNiCd Delta-peak voltage sensitivity1 to 20mVNiMH Delta-peak voltage sensitivity1 to 20mVBattery temperature cut-off20 to 80C or OFFWaiting time between charge/discharge1 to 60 min. Integral timer limit for safety10 to 720 min.or OFFMaximum charging capacity limit for safety10 to 9990mAh or OFFKey beep and buzzer soundON/OFFInput DC power low alert10 to 11VOptimized operating softwareWhen charging or discharging, TB6B has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Individual voltage balancer for Li-ion/Li-Polymer batteries inside TB6B has

NEW! Tenergy TB6B 50W Balancing Charger for NiMH/NiCD/Li-PO/Li-Fe/SLA

NEW! Tenergy TB6B 50W Balancing Charger for NiMH/NiCD/Li-PO/Li-Fe/SLA

89.99 USD

The Best ALL-IN-One Universal Charger in the Market Tenergy "Octopus" Multi Charging Harness Also Incuded ($10.99 value added FREE!)Supports the following connector types TraxxasTamiyaMini Tamiya JSTHitec EC3 Deans Supports multiple types of battery packs with one single charger! The follow packs are supported NiMH/NiCD 1~15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) Li-Fe 1~6 series Sealed Lead Acid (SLA)Charger Specifications Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA BatteriesBuild-in Balancer DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz (AC Adapter Required)Charge/discharge powermax. 50/5 WattsNiCd/MH 1~15 cellsLiIo/LiPo/LiFe 1~6 series Pb2~20VCharge current0.1 to 5.0ADischarg current0.1 to 1.0ANo. of cycle1 to 5 times Battery data memory up to 5 data Weight246gDimension130x85x33 mmUser's setting-up parametersBattery voltage typeLiIo:3.6V, LiPo:3.7V, LiFe:3.3VNiCd Delta-peak voltage sensitivity1 to 20mVNiMH Delta-peak voltage sensitivity1 to 20mVBattery temperature cut-off20 to 80C or OFFWaiting time between charge/discharge1 to 60 min. Integral timer limit for safety10 to 720 min.or OFFMaximum charging capacity limit for safety10 to 9990mAh or OFFKey beep and buzzer soundON/OFFInput DC power low alert10 to 11VOptimized operating softwareWhen charging or discharging, TB6 has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Individual voltage balancer for Li-ion/Li-Polymer batteries inside TB6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Li-ion/Li-Polymer batteries LiIo/LiPo/LiFe for cell voltage balancing.Balance individual cells on discharge TB6 also can monitor and balance individual cells of the battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Accept various types of battery TB6 can accept three types of batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. Battery 'Fast' and 'Storage' mode You can charge Li-ion/Li-Polymer battery for special purposes. 'Fast' charge reduces the charging time of battery and 'Storage mode controls the final voltage of the battery to be suit for long ti

Tenergy TB6 Balancing Charger for NiMH/NiCD/Li-PO/Li-Fe/SLA

Tenergy TB6 Balancing Charger for NiMH/NiCD/Li-PO/Li-Fe/SLA

89.99 USD

The Best ALL-IN-One Universal Charger in the Market Tenergy "Octopus" Multi Charging Harness Also Incuded ($10.99 value added FREE!)Supports the following connector types TraxxasTamiyaMini Tamiya (for Airsoft packs) JSTHitec EC3 DeansSupports multiple types of battery packs with one single charger! The follow packs are supported NiMH/NiCD 1~15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) Li-Fe 1~6 series Sealed Lead Acid (SLA)Charger Specifications Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA BatteriesBuild-in BalanceTemperature SensorDC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. SpecificationOperating voltageDC 11~18 volts AC 100~240V, 50/60HzCharge/discharge powermax. 50/5 WattsNiCd/MH1~15 cellsLiIo/LiPo/LiFe1~6 seriesPb2~20VCharge current0.1 to 5.0ADischarg current0.1 to 1.0ANo. of cycle1 to 5 timesBattery data memoryup to 5 dataWeight1000gDimension160x120x40 mmUser's setting-up parametersBattery voltage typeLiIo:3.6V, LiPo:3.7V, LiFe:3.3VNiCd Delta-peak voltage sensitivity1 to 20mVNiMH Delta-peak voltage sensitivity1 to 20mVBattery temperature cut-off20 to 80C or OFFWaiting time between charge/discharge1 to 60 min.Integral timer limit for safety10 to 720 min.or OFFMaximum charging capacity limit for safety10 to 9990mAh or OFFKey beep and buzzer soundON/OFFInput DC power low alert10 to 11VOptimized operating software When charging or discharging, TB6 has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Dual input powerTB6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 16 cells of NiCd/NiMH and 6 series of Li-ion/Li-Polymer batteries with maximum current of 5.0A. Individual voltage balancer for Li-ion/Li-Polymer batteries insideTB6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Li-ion/Li-Polymer batteries LiIo/LiPo/LiFe for cell voltage balancing.Balance individual cells on dischargeTB6 also can monitor and balance individual cells of the battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Accept various types of batteryTB6 can accept three types of bat

Li-Polymer 3.7V 50Ah (13212223) Battery (DGR)

Li-Polymer 3.7V 50Ah (13212223) Battery (DGR)

459.99 USD

Features Tenergy Unique High-Capacity Li-Po Single CellHigh operating voltageEnergy density is high,volumetric energy density of 350Wh/L and gravimetric energy density of 135Wh/kg.No memory effectSelf-discharge is less than 10% per monthCharge/discharge cycle characteristics are excellentSafety characteristics are excellentThe battery has a wide discharging temperature range of -20 °C to +60 °CThe capacity in amp-hours is guaranteed, and will be exceeded most of the time. Item Spec Note Model 13212223/50000mAh Charge Voltage 4.2V End-of-charge voltage 4.2V CC\CV Nominal Voltage 3.7V Cell Voltage between 3.6V ~3.9V beforeshipping Nominal Capacity ≥50000mAh@ 0.2C Discharge Nominal Capacityrefertothecapacityof 0.2C discharge with2.75Vcut-off voltage,afterchargingwithstandardmethod. Cycle Life ≥ 300 Times One cycle refertoonechargeperiodand then one discharge period. Test condition Charge0.2C to 4.2V Discharge0.2C to 2.75V The cycle lifeisthecycletimeswhen the discharge capacityis about 80% ofthe rated capacity. Self-discharge Residual Capacity>90% After standard charging, storied at 25°C±0.5°C for30 days, thenmeasure the capacityas item 4. Impedance Typical:8mΩ Max10mΩ Afterstandardcharging, measure the internal resistance withAC1KHz Max. Charge Current 1.0C Max. DischargeCurrent 1.0C Discharge Cut-offVoltage 2.75V Operating Temperature Discharge:-10℃~+60℃Charge0 ℃~ +45℃ Cellsmustbestoried at3.6V-3.9V. During long periodstorage, cellsshould be maintained every 90 days.The method is todoacharge-dischargecycle with standard method, then charge to 3.7—3.9V. Storage Temperature -20 ℃~+45℃ Cell Weight Approx 1.4Kg Cell Dimension Length:225mm Max Width:212mm Max Thickness:13.5mm Max Measured with weighting 300gf at 25℃± 0.5℃ Notincluding Tabs Cautions CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Polymer Li-Ion batteries3.7V 50000mAh (13212223)Datasheet

Universal Fast Smart TLP3000 1.5A Charger for Li-Ion / Li-polymer battery Pack (14.8V 4 cells)

Universal Fast Smart TLP3000 1.5A Charger for Li-Ion / Li-polymer battery Pack (14.8V 4 cells)

N/A

Intelligent charger designed for all types of 14.4V (4 cells) Li-Ion Battery packs including Polymer Li-Ion and Cylindral Li-Ion. Worldwide input AC power from 110V --- 240V. 1500 mA (1.5A ) constant charging current for faster charging, save your much more time. Charging time for 4000mAh battery pack is about 2.6 Hrs. ( Please use it to charge Li-Ion battery with capacity > 1500mAh) Built in IC to cut off power automatically when battery is fully charge. Red Lead will show Battery in charging and Green LED shows full. (Green LED also is ON when no battery is connected). Two pins male connector is for connecting to Li-Ion battery pack One 5' cable with male connector is included , which allow you connect it to a battery pack and fits with the smart charger. Dimension4.375" L x 2.375" W x 1.25" H. Weight7.5ozCompact size and lightweight. It is perfect to charger our 14.4V Li-Ion battery pack module and 14.4V Li-Ion battery pack for bike-lightingWarning:Only charge Li-Ion battery pack with capacity more than 1500 mAh. Don't use the charger for lower capacity Li-Ion battery pack. Only charge Li-Ion battery pack with voltage 14.8V ( 4 cell pack ) . Don't use the charger for Lower voltage battery pack, whcih may cayse battery exploded We are not responsible for any damage baused by user and miss use.Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product is any changes are amde to the chargerm accessories or connectors.Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled. Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. Put the batteries in fire-proof container in charging. Never leave batteries unattended when charging Do not put batteries on wood surface or carpet when charging We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries in charging. We are not responsible for damage caused by other Li-ion batteries not supplied from us

Tenergy Intelligent 3.2A Charger  for 33.3V  9S Li-ion / Li-Polymer Battery Pack

Tenergy Intelligent 3.2A Charger for 33.3V 9S Li-ion / Li-Polymer Battery Pack

99.99 USD

Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 9S 33.3V Li-Po/Li-ion battery from any status. Output voltage21.6 V DC ~ 41.6V DC Battery capacity extend2.6Ah ~ 48Ah Number of cells9 Li-ion / Li-Polymer cells in series Charge current3.2A 0.1A Max. delivered power121W Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.83Arms Max. input power142.5W Dimension158mm x 90mm x 57.5mm Weight642gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here.

Tenergy Intelligent 3.5A Charger  for 29.6V  8S Li-ion / Li-Polymer Battery Pack

Tenergy Intelligent 3.5A Charger for 29.6V 8S Li-ion / Li-Polymer Battery Pack

99.99 USD

Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 8S 29.6V Li-Po/Li-ion battery from any status. Output voltage19.2 V DC ~ 37.2V DC Battery capacity extend2.8Ah ~ 52Ah Number of cells8 Li-ion / Li-Polymer cells in series Charge current3.5A 0.1A Max. delivered power117.5 Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.81Arms Max. input power140W Dimension158mm x 90mm x 57.5mm Weight631gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here.

Tenergy Intelligent 2.2A Charger  for 48.1 V  13S Li-ion / Li-Polymer Battery Pack

Tenergy Intelligent 2.2A Charger for 48.1 V 13S Li-ion / Li-Polymer Battery Pack

105.99 USD

Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 13S 48.1V Li-Po/Li-ion battery from any status. Output voltage31.2 V DC ~ 59.2V DC Battery capacity extend2Ah ~ 33Ah Number of cells13 Li-ion / Li-Polymer cells in series Charge current2.2A 0.1A Max. delivered power120 Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.83Arms Max. input power141W Dimension158mm x 90mm x 57.5mm Weight636gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here.

Tenergy Intelligent 2A Charger  for 55.5 V  15S Li-ion / Li-Polymer Battery Pack

Tenergy Intelligent 2A Charger for 55.5 V 15S Li-ion / Li-Polymer Battery Pack

105.99 USD

Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 15S 55.5V Li-Po/Li-ion battery from any status. Output voltage36 V DC ~ 68V DC Battery capacity extend1.6Ah ~ 30Ah Number of cells15 Li-ion / Li-Polymer cells in series Charge current2.0A 0.1A Max. delivered power126W Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.86Arms Max. input power148W Dimension158mm x 90mm x 57.5mm Weight636gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here.

Tenergy Intelligent 3A Charger  for 37 V  10S Li-ion / Li-Polymer Battery Pack

Tenergy Intelligent 3A Charger for 37 V 10S Li-ion / Li-Polymer Battery Pack

99.99 USD

Specification:Input:100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details)Automatic change 10S 37V Li-Po/Li-ion battery from any status. Output voltage24 V DC ~ 46V DC Battery capacity extend2.4Ah ~ 45Ah Number of cells10 Li-ion / Li-Polymer cells in series Charge current3.0A 0.1A Max. delivered power126 Rated AC input100~240VAC 50/60Hz Input voltage90~264VAC Rated input current0.86Arms Max. input power148.5W Dimension158mm x 90mm x 57.5mm Weight631gAccessories Included Premium metallic 3 pin connector (positive, null, negative) 1 standard Tamiya Female connector. Alligator clips red + black.Caution The charger is designed for indoor use only. Don't leave the charger unattended during charging. The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods.Don't cover the charger when charging, ambient temperature shall not be more than 40oC Don't touch the plug.Don't leave the batteries and chargers on wood surface or carpet. Cut off the power supply before connect or disconnect the charger with batteries.Don't try to disassemble the charger, High voltage inside, danger!Download product manual here.

Tenergy Intelligent 2.5A Charger  for 18.5V  5S Li-ion / Li-Polymer Battery Pack

Tenergy Intelligent 2.5A Charger for 18.5V 5S Li-ion / Li-Polymer Battery Pack

49.99 USD

SpecificationInput 100V-240V /50-60Hz AC PowerStandard USA AC power plug. For other country's Plug adapters, click herePatented 4 Stage charge algorithm guarantee 100% Protection (check the Datasheet for details) Automatic change 5S 18.5V Li-Po/Li-ion battery from any status.Output voltage12.0 V DC ~ 24.0V DCBattery capacity extend2Ah ~ 30AhNumber of cells5 Li-ion / Li-Polymer cells in seriesCharge current2.5A 0.1AMax. delivered power52.5WRated AC input100~240VAC 50/60HzInput voltage90~264VACRated input current0.40ArmsMax. input power62.5WDimension148mm x 78mm x 43mmWeight535gAccessories IncludedPremium metallic 3 pin connector (positive, null, negative)1 standard Tamiya Female connector.Alligator clips red + black.CautionThe charger is designed for indoor use only. Don't leave the charger unattended during charging.The Charger should be positionedhorizontally and work in well ventilated condition, avoid water andkeep away from flammable explosive goods. Don't cover the charger when charging, ambient temperature shall not be more than 40oCDon't touch the plug. Don't leave the batteries and chargers on wood surface or carpet.Cut off the power supply before connect or disconnect the charger with batteries. Don't try to disassemble the charger, High voltage inside, danger!Download product manual here.

Li-Polymer  3.7V 1150mAh (503565) Battery

Li-Polymer 3.7V 1150mAh (503565) Battery

21.99 USD

Prismatic Polymer Li-Ion Battery, 3.7V, 1150mAh (503565) SpecificationsValuesRated Capacity (mAh)1150mAh @ 0.2CModel Number503565Nominal Voltage (V)3.7Dimensions (mm)66(length) x 35(width) x5(thickness)Impedance (m-Ohm)<= 50Cell Weight (g)About 25.0 gMax. Charge Current (mA) 1150Max. Charge Voltage (V)4.2Max. Discharge Current (mA)2300Cut-off voltage (V)2.75Operation TemperatureCharge0~~+45 oCDischarge-20~~+60 oCStorage Temperature<= 1 month-10~~+35 oC>=6 month-5~~+30 PCB SelectionProtection circuis Module ( PCB ) for 3.7V Li-Polymer Battery (8.5A limit)oCCautions Be careful when working with Li-ion cells - they are very sensitive to charging characteristics and may explode if mis-handled.User should have enough knowledge about Li-ion rechargeable batteries before charging, discharging and assemble.We are not responsible for any damage caused by misuse or mishandling of these Li-ion batteries.DO NOT leave battery un-attended during charging - please keep out of children's reach.DO NOT put batteries on wood surface, carpet, or near flammable materials while charging.

Protection Circuit Module (PCB) for 25.9V Li-Ion/Li-Polymer Battery Pack (7 cells 10A limit)

Protection Circuit Module (PCB) for 25.9V Li-Ion/Li-Polymer Battery Pack (7 cells 10A limit)

N/A

Specifications:Easy Connection:Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge, and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 25.9V 7 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells. Keeps 25.9V Li-Ion Battery pack from overcharge and over dischargeKeeps 25.9V Li-Ion Battery pack 's discharging current lower than 10 AShort Cut ProtectionDesigned for 7 Cells Li-ion / Li-polymer Battery Packs ( 25.9V up to 20 Ah)Battery ProtectionDimension105mm x 43mm x 6mm Weight15gPCB Indications B+Battery (+)B-Battery (-)P+OUT (+) /Load (+)C+OUT (+) /Charge (+)P-OUT (-) /Charge(-) / Load(-) Electric performance Overcharge Protection voltage for single cell:4.235V +/- 0.025VOverdischarge Protection voltage for single cell:2.30V+/-0.08VOver current detection Protection<=10 A +/-1ASupply current:MAX 600uAShort circuit Protection0 V chargeProtection circuitry Resistance:<= 10 mill-ohms

Li-Polymer 3.7V 5100mAh (7550140) Battery

Li-Polymer 3.7V 5100mAh (7550140) Battery

N/A

Prismatic Polymer Li-Ion Battery, 3.7V, 5100mAh (7550140) for Lighting and LaptopBattery ChemistryPolymer Li-IonElectrical3.7V, 5100mAhModel7550140Max Charging Rate2785mAh (0.5C)Max Dis-Charging Rate5100mAh (1C)Cycle LifeUp to 500 TimesWeight102gDimension140mm x50 mm x7.5 mmPCB SelectionProtection circuis Module ( PCB ) for 3.7V Li-Polymer Battery (8.5A limit)Cautions CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries Download data sheet here.

Li-Ion External Battery 3200mAh Power Bank

Li-Ion External Battery 3200mAh Power Bank

84.99 USD

Model R12 is specially designed for working with Nintendo and Sony personal game players. It includes a mini-USB plug to support various other portable media players or game devicesSpecifications Cell TypeLi-polymer battery Li-polymer battery Size 74mm x 74mm x 14.5mmWeight 120gColorWhite Output Port 5.0V/1500mACapacity 2 x 1600mAh/3.7VWorking Temp. 0 Celsius to 50 CelsiusChargingTimeA Approx.4 HoursRecharging Times300times( have 80% power-restoring design)13 Power tips are included for MP3 Players, Digital Cameras, Cellular Phones, PDAs, Sony PSP (Portable Nintendo & PSP GamePlayers), Video Cameras, Hand-held Computers, CD Players, DVD Players, and much more Look at all other power bank products

Tenergy Li-Polymer  3.7V 380mAh (303048) Battery

Tenergy Li-Polymer 3.7V 380mAh (303048) Battery

N/A

Prismatic Polymer Li-Ion Battery, 3.7V, 380mAhBattery ChemistryPolymer Li-IonElectrical3.7V, 380mAhModelPL-303048Max Charging Rate380mA (1C)Max Dis-Charging Rate760mA (2C)Cycle LifeUp to 500 TimesWeight8gDimension48mmx30 mmx3 mmPCB SelectionProtection circuis Module ( PCB ) for 3.7V Li-Polymer Battery (8.5A limit)Cautions CAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries.Download product data sheet here.

Nine Li Fish Silk Screen

Nine Li Fish Silk Screen

192.0 USD

The Nine Li Fish motif is colorful and very auspicious, attracting good fortune to the home. Large (3ft. x 6ft.), hand painted ink and watercolor silk screen. Song dynasty (10th century China) brush art style. Crafted from silk covered paper, glued over four side-by-side lacquered wood frames. Matted with a fine Chinese silk brocade border. Comes with lacquered brass geometric hangers for easy mounting. Can be displayed as a privacy screen, partly folded to stand upright on a table or floor. Note that no two renderings are exactly the same. Subtle, beautiful hand painted wall art for a fraction of the cost of a comparable print.

Li-Polymer 3.7V 220mAh (461540) - UL Listed

Li-Polymer 3.7V 220mAh (461540) - UL Listed

10.99 USD

Prismatic Polymer Li-Ion Battery, 3.7V, 220mAh (461540) for RC Car and RC Plane or Micro Device Battery Chemistry Polymer Li-IonElectrical 3.7V, 220mAhModel 461540Continuous discharge current 40mAhMax Dis-Charging Rate 220mAhCycle Life Up to 500 TimesWeight 5gDimension 40 mm x 15 mm x 4.6 mmCAUTIONwhen working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled. User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries

11.1 volt - 500mAh 10C Li-Poly Pack

11.1 volt - 500mAh 10C Li-Poly Pack

30.99 USD

3 cell Li-Polymer 500mAh battery pack.10C continuous discharge rate of 5amps with 7.5 amp bursts in accordance with our "Real Flight Rating" method.Maximum charge rate 0.5 Amps. With Align Balance Connector Dimensions 15.5mm x 26.5mm x 56mm Weight44 grams Please see our "Real Flight Rating" method that describes more specific use of"burst" discharge rates with our Li-Poly cells. Recommend to use Cell Shield for 2-6 Series connected packs or LiPo Shield for 1-12 series connected packs to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

LIAN LI PC-O6SX Black Computer Case

LIAN LI PC-O6SX Black Computer Case

276.99 EUR

LIAN LI PC-O6SX Black Side Panel: Tempered Glass Body Material: Aluminum MicroATX Mid Tower Computer Case Motherboard Compatibility: MicroATX Front Ports: USB3.0 x 4 HD Audio 120mm Fans: Top:120mm fan x3 External 5.25" Drive Bays: 1 (Slim ODD) or 3.5"/2.5" HDD x1 External 3.5" Drive Bays: HDD Rack: 3.5" x3 + 2.5" x1 Behind the MB tray: 3.5" x1 + 2.5" x2 or 3.5" x2 or 2.5" x3 On the MB tray: 3.5" HDD x2 or 2.5" HDD x2 (Occupies 2 PCI slot space) Expansion Slots: 4 140mm Fans: Rear:140mm fan x1(Optional) Dimensions (H x W x D): 20.28" x 5.83" x 19.06"

Li-Polymer  3.7v 3000mAh 15C (5745135) Battery

Li-Polymer 3.7v 3000mAh 15C (5745135) Battery

N/A

Single cell Li-Polymer 3000mAh battery.15C continuous discharge rate of 45amps with 60 amp bursts in accordance with our "Real Flight Rating" method.Maximum charge rate 3 Amps.Dimensions135mm x 45mm x 5.7mmWeight77 gramsPlease see our "Real Flight Rating" method that describes more specific use of"burst" discharge rates with our Li-Poly cells. Recommend to use Cell Shield for 2-6 Series connected packs or LiPo Shield for 1-12 series connected packs to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

LIAN LI PC-O5SX Black Computer Case

LIAN LI PC-O5SX Black Computer Case

266.99 EUR

LIAN LI PC-O5SX Black Side Panel: Tempered Glass Body Material: Aluminum Mini Chassis Computer Case Motherboard Compatibility: Mini-ITX Front Ports: USB3.0 x 2 HD Audio 120mm Fans: Top:120mm fan x2 External 5.25" Drive Bays: 1 (Slim ODD) or 3.5"/2.5" HDD x1 External 3.5" Drive Bays: HDD Rack: 3.5" x2 + 2.5" x1 Behind the MB tray: 3.5" x1 + 2.5" x1 or 2.5" x2 On the MB tray: 3.5" x1 + 2.5" x1 or 2.5" x2 (Occupies 2 PCI slot space) Expansion Slots: 4 140mm Fans: Rear:140mm fan x1(Optional) Dimensions (H x W x D): 18.31" x 5.83" x 15.12"

Motorola NNTN4497CR 2190 Mah Li-Ion Battery

Motorola NNTN4497CR 2190 Mah Li-Ion Battery

64.0 USD

"Motorola NNTN4497CR / NNTN4851 / NNTN4970 Brand New Includes One Year Warranty Special Order: 7-10 days to ship, The Motorola NNTN4496 is a 2250mAh 7.2V replacement battery for Motorola two way radios. Voltage: 7.2vCapacity: 2250mAhComposition: Lithium Ion Replacement Battery For The Following Motorola 2-Way Radio Models CP040 CP140 CP150 CP160 CP180 CP200 CP200D CP200XLS CP340 CP360 CP380 EP450 EP450S GP3138 GP3688 PR400 Motorola Battery Models NNTN4497 NNTN4497A NNTN4497AR NNTN4497BR NNTN4497CR NNTN4851 NNTN4851AR NNTN4851R NNTN4970 NNTN4970AR"

Li-Polymer 3.7v 2000mAh 10C Battery

Li-Polymer 3.7v 2000mAh 10C Battery

N/A

Single cell Lithium Polymer 2000mAh battery. 10C continuous discharge rate of20 amps with30 amps bursts in accordance with our "Real Flight Rating" method.Dimensions80mm x 34mm x 8mm Weight:33 grams Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells. Recommend to use Cell Shield for 2-6 Series connected packs or LiPo Shield for 1-12 series connected packs to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

Motorola NNTN4851A 1400 Mah Li-Ion Battery

Motorola NNTN4851A 1400 Mah Li-Ion Battery

49.0 USD

"Motorola NNTN4497 / NNTN4851A / NNTN4970, The Motorola NNTN4851A is a 1400mAh 7.4V replacement battery for Motorola two way radios. 2-Way Professional BatteryVoltage: 7.5vCapacity: 1400mAhComposition: NiMH Replacement Battery For The Following Motorola 2-Way Radio Models CP040 CP140 CP150 CP160 CP180 CP200 CP200D CP200XLS CP340 CP360 CP380 EP450 EP450S GP3138 GP3688 PR400 Motorola Battery Models NNTN4497 NNTN4497A NNTN4497AR NNTN4497BR NNTN4851 NNTN4851A NNTN4851AR NNTN4851R NNTN4970 NNTN4970AR PMNN4251 PMNN4253"

LumiSource DOE-LI-LAMP Doe Li 1 Light Touch Table Lamp in Brushed Aluminum

LumiSource DOE-LI-LAMP Doe Li 1 Light Touch Table Lamp in Brushed Aluminum

69.0 USD

The Doe Li Touch Lamp will never leave you in the dark With a simple touch of any part of the metal arm or base, you can turn on the power and adjust the brightness to low, medium or high. This lamp is the ultimate combination of function and elegance.Bulb Type: Incandescent Collection: Doe Li Diameter: 14 Finish: Brushed Aluminum Height: 19 Number of Lights: 1 Shade: Satin Glass Style: Modern Contemporary Voltage: 120 Wattage: 40 Weight: 9

11.1 volt - 3150mAh 10C Li-Poly Pack

11.1 volt - 3150mAh 10C Li-Poly Pack

59.95 USD

3 cell Li-Polymer 3150mAh battery pack.10C continuous discharge rate of31.5 amps with 46 amp bursts in accordance with our "Real Flight Rating" method. Maximum charge rate 3 Amps. With Align Balance Connecor Dimensions 21mm x 47mm x 139mmWeight257 gramsPlease see our "Real Flight Rating" method that describes more specific use of"burst" discharge rates with our Li-Poly cells.

LIAN LI PC-B16B Black Computer Case

LIAN LI PC-B16B Black Computer Case

316.99 SGD

LIAN LI PC-B16B Black Aluminum ATX Full Tower Computer Case Motherboard Compatibility: Micro ATX / ATX / XL-ATX Front Ports: USB 3.0 x 4, Audio Ports HD Audio 120mm Fans: 120mm Fan x 2 System Fan (Rear) 120mm Fan x 1 System Fan (Top) 140mm or 120mm Fan x 2 (Optional) External 5.25" Drive Bays: 4 Internal 3.5" Drive Bays: 3.5" HDD or 2.5" HDD x 6 Expansion Slots: 7

LIAN LI PC-V33B Black Computer Case

LIAN LI PC-V33B Black Computer Case

10247.0 INR

LIAN LI PC-V33B Black Aluminum ATX Mid Tower Computer Case ATX PSU (not included) Power Supply Motherboard Compatibility: Micro ATX / ATX Front Ports: 2 x USB 3.0 / Audio 120mm Fans: System Fan(Front): 120mm x2(Optional) System Fan(Rear): 120mm x2 External 5.25" Drive Bays: 0 Internal 3.5" Drive Bays: 3.5" HDD x4 or 2.5" HDD x4 Expansion Slots: 7

Li-Polymer 3.7v 3200mAh 20C Battery

Li-Polymer 3.7v 3200mAh 20C Battery

N/A

Single cell Li-Polymer 3200mAh battery.20C continuous discharge rate of 64 amps with 80 amp bursts in accordance with our "Real Flight Rating" method.Maximum charge rate 3.2 Amps.Dimensions134mm x 44mm x 6mmWeight86 gramsPlease see our "Real Flight Rating" method that describes more specific use of"burst" discharge rates with our Li-Poly cells.

Bosch Gsr 3.6V -Li Mxdrive 2X1.3Ah Li-Ion Batteries

Bosch Gsr 3.6V -Li Mxdrive 2X1.3Ah Li-Ion Batteries

81.0 GBP

GSR MX2Small and handy cordless screwdriver with innovative two speed gearbox which allows for gear changes without interruption. Supplied with two batteries, charger and L-Boxx type carry case.Max. torque: 10Nm.No load speed: 0 - 580/0 - 150rpm.Battery: 2x 1.3Ah Li-Ion.Max. screw dia.: 5mm.Weight: 5kg.

LIAN LI PC-TU300X Black Computer Case

LIAN LI PC-TU300X Black Computer Case

15712.0 INR

LIAN LI PC-TU300X Black Aluminum ATX Mid Tower Computer Case ATX (not included) Power Supply Motherboard Compatibility: Micro ATX / ATX Front Ports: 2 x USB 3.0 / Audio 120mm Fans: System Fan(Top): 120mm x2 System Fan(Rear): 120mm x1 External 5.25" Drive Bays: 1 Internal 3.5" Drive Bays: 2

Bosch Gsb 18V-Li Dynamic Comb 1X4 0Ah Li-Ion C/W Rct,Set

Bosch Gsb 18V-Li Dynamic Comb 1X4 0Ah Li-Ion C/W Rct,Set

167.99 GBP

Powerful 67Nm Torque provided by newly developed gearbox design and new 4-pole high performance motor. Supplied with battery, Charger and L-Boxx carry case.No load speed: 0 - 1,700rpm.Torque max: 67Nm.Drilling capacities: wood 35mm, steel 13mm, masonry 13mm.Battery: 1x 18V 4.0Ah Li-Ion.

LIAN LI DK-Q2X Black Computer Case

LIAN LI DK-Q2X Black Computer Case

1219.0 AUD

LIAN LI DK-Q2X Black Aluminum ,and Tempered glass Computer Case ATX PSU (Optional) Power Supply Motherboard Compatibility: Micro ATX / ATX Front Ports: 4 x USB 3.0 / Audio 120mm Fans: 120mm x8 Internal 3.5" Drive Bays: 7 Expansion Slots: 3 Max Graphics Length Supported: 370mm

LIAN LI PC-Q03B Black Computer Case

LIAN LI PC-Q03B Black Computer Case

62.99 EUR

LIAN LI PC-Q03B Black Aluminum Mini-ITX Tower Computer Case Motherboard Compatibility: Mini-ITX Front Ports: 2 x USB 3.0 / Audio Power Supply Mounted: Top External 5.25" Drive Bays: 1 (Slim ODD) Internal 3.5" Drive Bays: 1 Internal 2.5" Drive Bays: 2 (Using 3.25-inch Bays)

LIAN LI PC-Q20W White Computer Case

LIAN LI PC-Q20W White Computer Case

4099.0 INR

LIAN LI PC-Q20W White Aluminum Computer Case SFX PSU (Optional) Power Supply Motherboard Compatibility: Mini-ITX Front Ports: 2 x USB 3.0 Internal 3.5" Drive Bays: 2x 2.5" or 3.5"x 1 Expansion Slots: 1 Slot-in ODD Bays: 1 Dimensions (H x W x D): 9.25" x 5.86" x 8.07"

Super Bowl LI Luncheon Napkins

Super Bowl LI Luncheon Napkins

2.47 USD

OurSuper Bowl LI Luncheon Napkinsfeature the NRG Stadium located in Houston Texas along with an official NFL pigskin These Super Bowl 51 Napkinsare the perfect choice to hand out with your famous football party munchies Package of 16 Made of paper Measures 6 12 inches

Super Bowl LI Dessert Plates

Super Bowl LI Dessert Plates

2.05 USD

OurSuper Bowl LI Dessert Platesfeature the NRG Stadium located in Houston Texas along with an official NFL pigskin These Super Bowl 51 Dessert Plates are the perfect choice to serve up your famous football party appetizers Package of 8 Made of paper Measures 7 inches

Li-Polymer  3.7v 3000mAh 20C (5745135) Battery

Li-Polymer 3.7v 3000mAh 20C (5745135) Battery

N/A

Single cell Li-Polymer 3000mAh battery.15C continuous discharge rate of 60 amps with 75 amp bursts in accordance with our "Real Flight Rating" method.Maximum charge rate 3 Amps.Dimensions135mm x 45mm x 6.0mmWeight75 gramsDownlaod product data sheet here.

Li-Polymer  3.7v 2100mAh 15C (783495) Battery

Li-Polymer 3.7v 2100mAh 15C (783495) Battery

N/A

Single cell Li-Polymer 2100mAh battery.15C continuous discharge rate of 31.5amps with 42 amp bursts in accordance with our "Real Flight Rating" method.Maximum charge rate 2.1 Amps.Dimensions95mm x 34mm x 7.8mmWeight46 gramsDownload product manual here.

Super Bowl LI Table Cover

Super Bowl LI Table Cover

5.99 USD

Set your event apart from the rest with the Super Bowl LI Table Cover The white cover features realistic images of the Super Bowl logo football and stadium repeated down both sides Made of plastic Measures 54 wide x 102 long Makes for easy clean up

Super Bowl LI Souvenir Cup

Super Bowl LI Souvenir Cup

1.49 USD

Cheer your team to victory with the Super Bowl LI Souvenir Cup during the game and send it home with guests as a favor after Cup features the Super Bowl football in front of the stadium and logo Made of plastic Holds 22 ounces Realistic images

Akkuladegerät ASG 11.1 V Li-Po / Li-Ion

Akkuladegerät ASG 11.1 V Li-Po / Li-Ion

29.99 EUR

Preiswertes Ladegerät für alle 11,1 V Li-Po / Li-Ion Akkus. Ein 1000 mAh Akku ist in 90 - 120 Minuten fertig geladen. Ein Auto-Stop Feature sowie eine LED-Leuchte, die bei vollem Ladestand aufleu..

Nikon EN-EL15 rechargeable Li-ion battery

Nikon EN-EL15 rechargeable Li-ion battery

45.78 GBP

The Nikon rechargeable Li-ion battery EN-EL15 that is capable of capturing over 1000 images. Compatible with: D7200, D7100, D7000, D810, D810A, D800, D800E, D610, D600, D500, V1, D750.

Super Bowl LI Beverage Napkins

Super Bowl LI Beverage Napkins

2.05 USD

You will have your fans shouting for more with Super Bowl LI Beverage Napkins Colorfully designed napkins are sure to be a fan favorite Made of paper Measure 5 x 5 Package of 16

Yang Li Black Oversized Shirt

Yang Li Black Oversized Shirt

440.0 GBP

Cotton shirt in black. Oversized fit. Spread collar. Cropped sleeves. Patch pocket at chest. Button closure. Vented shirttail hem. Unfinished cuffs and hem. Tonal stitching.

Yang Li Black Leather Oxfords

Yang Li Black Leather Oxfords

575.0 GBP

Buffed calfskin oxfords in black. Almond toe. Lace_up closure. Patent leather panel at vamp. Stacked leather midsole. Vibram brand treaded rubber sole. Tonal stitching.

eForCity Olympus Li-50B Compatible Li-Ion Battery For 1010 / 1020 / 1030

eForCity Olympus Li-50B Compatible Li-Ion Battery For 1010 / 1020 / 1030

4.81 EUR

eForCity Olympus Li-50B Compatible Li-Ion Battery For 1010 / 1020 / 1030 Feature: High capacity / rechargeable Li-ion Battery with premium cell

Fujiyama LI-50B

Fujiyama LI-50B

7.18 GBP

The Lithium-Ion Battery Pack LI-50B is a rechargeable battery pack for your Olympus digital camera. The 3.7V battery has a capacity of 925mAh.

Honeywell H5571-LI Battery CLS Series 3.7V 1440mAh Li-Ion

Honeywell H5571-LI Battery CLS Series 3.7V 1440mAh Li-Ion

19.99 USD

Honeywell H5571-LI Battery CLS Series 3.7V 1440mAh Li-Ion Part Number: H5571-LI Type: Battery Specification: Lithium-Ion, 3.7V